MAMX-007607-ELCM1H MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- LO Power +17 dBm
- Up to +14 dBm RF
- Low Profile
- Surface Mount
- Tape and reel packaging available
- 260°C Reflow Compatible
- RoHS* compliant version of the ELCM-1HTR
Description
M/A-COM’s MAMX-007607-ELCM1H is a RoHS Com- pliant Low Cost, Broadband, high performance Double Balanced Mixer designed for use in high volume wire- less applications. The device has been optimized by careful selection of the Schottky Diode and Balun Transformer for excellent performance. The MAMX- 007607-ELCM1H is available in an SM-87 surface mount package and is designed to be utilized in both standard reflow and high temperature soldering reflow profiles. Parts are packaged in tape & reel.
Ordering Information
MAMX-007607-ELCM1H Tape and Reel (900 piece Reel) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. Pin Configuration Pin No. Function 1 LO
2 Ground
3 Ground
6 Ground
Absolute Maximum Ratings 1,2 Parameter Absolute Maximum RF Power 200 mW Peak IF Current 40 mA Operating Temperature -55°C to +85°C Storage Temperature -65°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.
E-Series Surface Mount Mixer 0.5 – 500 MHz MAMX-007607-ELCM1H V1 P RoHS Compliant Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω, LO = +17 dBm Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 0.5 - 500 MHz — — — LO Frequency — 0.5 - 500 MHz — — — IF Frequency — DC - 500 MHz — — — Conversion Loss — 1 - 250 250 - 500 dB dB 6.8 7.2 7.5 8.0 Isolation LO to RF 0.5 - 5 5 - 250 250 - 500 dB dB Isolation LO to IF 0.5 - 5 5 - 250 250 - 500 dB dB dB Input 1 dB Compression — 0.5 - 500 dBm — — 14 Typical Performance Curves LO - RF Isolation Conversion Loss LO - IF Isolation 0 100 200 300 400 500 Frequency (MHz) dB -70 -60 -50 -40 -30 -20 -10 0 100 200 300 400 500 Frequency (MHz) dB -70 -60 -50 -40 -30 -20 -10 0 100 200 300 400 500 Frequency (MHz) dB