MAMUCT0021 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Low Noise Figure
  • Low Distortion
  • Multifunction Integration
  • Single Positive Supply
  • 75 ohm Impedance
  • Lead-Free Surface Mount Package
  • Electroless Nickel Imersion Gold (ENIG) Finish
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of MAMUSS0007

Description

M/A-COM’s MAMUCT0021 is an integrated module consisting of an amplifier and two equal split power dividers. The push-pull, low distortion, amplifier includes the baluns and DC bias circuitry. The device is ideally suited for use in the CATV market where low noise figure, low distortion and high linearity are required. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Ordering Information

MAMUCT0021TR 500 Piece Reel MAMUCT0021SMB Sample Test Board (Includes 5 Samples) Parameter Absolute Maximum Input Power +20 dBm Operating Voltage +10 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Absolute Maximum Ratings 1,2 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Pin Configuration Functional Schematic Pin No. Pin Name Description

1 GND Ground

2 GND Ground

3 GND Ground

4 GND Ground

5 GND Ground

6 GND Ground

7 GND Ground

8 GND Ground

9 IN RF Input

10 GND Ground

11 VDD +5V

12 GND Ground

13 OUT 1 RF Output 1

14 GND Ground

15 OUT 2 RF Output 2

16 GND Ground

17 OUT 3 RF Output 3

18 GND Ground

CATV Amplifier Splitter Module 50 - 860 MHz MAMUCT0021 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Electrical Specifications: TA = 25°C, Freq: 50 - 860 MHz, VDD = +5 Volts, Z0 = 75 Ω Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Parameter Test Conditions Units Min. Typ. Max. Gain IN-OUT1, IN-OUT2 dB 4 5 6.8 Gain IN-OUT3 dB 7.6 8.5 9.8 Gain Unbalance IN-OUT1 vs IN-OUT2 dB — 0.6 — Gain Flatness IN-OUT1/2 dB 0 1.1 1.6 Gain Flatness IN-OUT 3 dB 0 0.8 1 Noise Figure IN-OUT1, IN-OUT2 50 – 150 MHz 150 – 860 MHz dB dB 3.7 3.4 Noise Figure IN-OUT 3 50 – 150 MHz 150 – 860 MHz dB dB 3.4 3.0 Return Loss IN dB — 15 — Return Loss OUT dB — 17 — Isolation OUT-OUT dB — 24 —- Composite Triple Beat, CTB 135 channels, +13 dBmV/channel at the input dBc — -78 -70 Composite Second Order, CSO 135 channels, +13 dBmV/channel at the input dBc — -78 -70 Cross modulation 135 channels, +13 dBmV/channel at the input dBc — -66 — IDD VDD = + 5 Volts mA — 200 225

CATV Amplifier Splitter Module 50 - 860 MHz MAMUCT0021 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. RoHS Compliant In – Out 2 Noise Figure In – Out 1 In – Out 3 Isolation Typical Performance Curves 0 200 400 600 800 1000 -40°C +25°C +85°C Frequency (MHz) 0 200 400 600 800 1000 -40°C +25°C +85°C Frequency (MHz) 0 200 400 600 800 1000 -40°C +25°C +85°C Frequency (MHz) 0 200 400 600 800 1000 In to Out 1 In to Out 2 In to Out 3 Frequency (MHz) 0 200 400 600 800 1000 Out 1 to Out 3 Out 1 to Out2 Out 2 to Out 3 Frequency (MHz)

CATV Amplifier Splitter Module 50 - 860 MHz MAMUCT0021 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Lead-Free Surface Mount Package3,4 3. All dimensions in mm. 4. Reference Application Note M538 for lead-free solder reflow recommendations. Output Return Loss Input Return Loss Typical Performance Curves -35 -30 -25 -20 -15 -10 0 200 400 600 800 1000 Frequency (MHz) -35 -30 -25 -20 -15 -10 0 200 400 600 800 1000 Out 1 Out 2 Out 3 Frequency (MHz) Recommended Board Layout