MAMO-000900-1291HB

MAMO-00900-1291HT MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• Excellent Carrier Suppression ~34dBc
• 6.0 dB Typical Modulator Conversion Loss
• +17 to +20 dBm LO Drive
• High 3x1 and 5x1 Harmonic Suppression
• No External Matching Required
• Low Cost Miniature Plastic MLP Package
• Lead Free and RoHS Compliant Description and Application M/A-COM's MAMO-000900-1 291HT is a silicon monolithic 850-960 MHz, high barrier, I/Q Modulator/Demodulator. Encapsulated in a low cost, miniature surface mount PQFN 6mm square, 28- lead plastic package the die utilizes M/A-COM’s unique HMIC silicon/glass pr ocess. This process enables the realization of low loss passive elements and efficient diode technology which in turn provides excellent harmonic suppression. In addition, the incorporated monolithic design techniques provide unparalleled amplitude and phase imbalance performance during demodulation thus adding to the unit’s overall versatility. These modulators/demodulators are well suited for GSM and CDMA Cellular basestation applications, as well as most RFID sys tems, particularly where small size and high performance are required. Typical applications include quadrature modulation requirements in wireless receivers and transmitters. MLP 6mm Package Circuit Side View Absolute Maximum Ratings1,2 Parameter Maximum Ratings Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Incident LO Power +20 dBm C.W. Incident RF Power +20 dBm C.W. 1. Exceeding these limits may cause permanent damage. 2. M/A-COM does not recommend sustained operation near these survivability limits. PIN Configuration3 PIN Function PIN Function

1 GND 15 GND

2 GND 16 GND

3 GND 17 GND

4 LO 18 RF

5 GND 19 GND

6 GND 20 GND

7 GND 21 GND

8 GND 22 GND

9 GND 23 GND

10 GND 24 GND

11 I 25 Q

12 GND 26 GND

13 GND 27 GND

14 GND 28 GND

28 PI N Q

1. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages)

Ordering Information

MAMO-000900-1291HT Tape and Reel MAMO-000900-1291HB Sample Test Board

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications (Modulator): TA = 25ºC, Z0 = 50Ω Parameter Frequency Range Test Conditions Units Min Typ Max Output Power 900 MHz 850-960 MHz LO Drive = +19 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO - 0.4 MHz dBm -14.5 -15 -13.5 -14 LO Carrier Suppression 850-960 MHz LO Drive = +19 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 0.4 MHz dBc SSB Rejection4 850-960 MHz LO Drive = +19 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 0.4 MHz dBc 30 3 x 1 Harmonic Suppression 850-960 MHz LO Drive = +19 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 1.2 MHz dBc 58 5 x 1 Harmonic Suppression 850-960 MHz LO Drive = +19 dBm I/Q = -7 dBm, I/Q = 400 kHz FRF = FLO + 2.0 MHz dBc 85 ACPR CDMA 20005 900 MHz Carrier Freq LO Drive = +19 dBm BB AC Voltage = 275mVp-p dBc 72 Output Noise Floor 850-960 MHz LO Drive = +19 dBm I/Q Power level = -7 dBm dBm/Hz - -161 LO Port Return Loss 850-960 MHz LO Drive = +19 dBm I/Q Power level = -7 dBm FRF = FLO + 0.4 MHz dB 19 RF Port Return Loss 850-960 MHz LO Drive = +19 dBm I/Q Power level = -7 dBm FRF = FLO + 0.4 MHz dB 6 IF Bandwidth 850 ≤ LO ≤ 970 MHz LO Drive = +19 dBm I/Q Power level = -7 dBm MHz 65 4. When the LO frequency is greater than the RF frequency, the upper sideband is suppressed. 5. The Baseband I and Q input signals were generated using the following settings in the Agilent E3844C Vector Signal Genera- tor: FWD CDMA2000 SR1 Pilot Filter: IS-95 Mod w/EQ Link: Forward IQ Mod Filter: Through PRE Clip: 100.0 %

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Modulator Band Performance 850-960 MHz -1 20 -1 00 -80 -60 -40 -20 850 860 870 880 890 900 91 0 920 930 940 950 960 FREQUENCY (MHz) Carrier Suppression, SSB Rejection, 3rd Harmonic, 5th Harmonic (dBc) CARRIER SUPPRESSION 3rd HARMONIC SSB REJECTION 5th HARM ONIC Modulator/Demodulator Return Loss 850-960 MHz -35 -30 -25 -20 -15 -10 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Return Loss (dB) L Port R Port

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Output Power 850-960 MHz -18 -17 -16 -15 -14 -13 -12 -11 -10 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Output Power (dBm) Output Noise Floor -180 -160 -140 -120 -100 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Output Noise Floor (dBm/Hz) System Noise Floor Output Noise Floor

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications (Demodulator) @ +25 °C, Z0 = 50Ω Parameter Frequency Range Test Conditions Units Min Typ Max Conversion Loss 900 MHz 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz dB - 12.6 Amplitude Imbalance 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz dB 0.05 0.3 Phase Imbalance6 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz deg - 1.0 3.0 Input IP3 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm (each tone) Tone 1 is 10 MHz above LO Freq Tone 2 is 11 MHz above LO Freq dBm Input 1dB Compression

900 MHz

LO Drive = +19 dBm FRF = FLO + 0.4 MHz dBm 14.5 LO Return Loss 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz dB 19 RF Return Loss 850-960 MHz LO Drive = +19 dBm RF Input = -7 dBm FRF = FLO + 0.4 MHz dB 6 IF Bandwidth - 850 MHz ≤ LO ≤ 970 MHz FRF = FLO + FIF; 0 ≤ FIF ≤ 65 MHz MHz 65 - - Demodulator Conversion Loss 850-960 MHz 6. When the LO frequency is greater than the RF frequency, the “Q” output leads the “I” output by 90 degrees nominal. -14 -13 -12 -11 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Demodulator Conversion Loss (dB) PLO = 19dBm PLO = 17dBm PLO = 20dBm

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Demodulator Input IP3 and Input 1dB Compression 850-960 MHz Demodulator Phase and Amplitude Imbalance 850-960 MHz 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) IIP3 (dBm), Input 1dB Compression (dBm) Input 1dB Compression @ 19dBm LO IIP3 @ 17dBm LO IIP3 @ 19dBm LO IIP3 @ 20dBm LO 0.00 0.50 1.00 1.50 2.00 2.50 3.00 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Phase Imbalance (Degrees) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Amplitude Imbalance (dB) Phase Imbalance @ 20dBm Phase Imbalance @ 17dBm Amp. Imbalance @ 17dBm LO Amp. Imbalance @ 20dBm LO Ph ase Imbalance @ 19 dBm LO 0.00 0.50 1.00 1.50 2.00 2.50 3.00 850 860 870 880 890 900 910 920 930 940 950 960 FREQUENCY (MHz) Phase Imbalance (Degrees) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Amplitude Imbalance (dB) Phase Imbalance @ 20dBm Phase Imbalance @ 17dBm Amp. Imbalance @ 17dBm LO Amp. Imbalance @ 20dBm LO Ph ase Imbalance @ 19 dBm LO

Rev. V3 MAMO-00900-1291HT Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. MAMO-000900-1291MT Outline – 6mm PQFN, 28-Lead