MAMDCC0002 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Operates 1.805 to 1.88 GHz (DCS)
  • Operates 1.93 to 1.99 GHz (PCS)
  • Low Amplitude Ripple
  • Linear Phase
  • 50 Ohm Nominal Impedance
  • Continuously Variable Across a Full 360 degree range
  • Test Boards Available
  • 4x6 mm PQFN Package

Description

M/A-COM's MAMDCC0002 is a Vector Modulator that significantly reduces the required board space compared to hybrid solutions. The monolithic pas- sive elements will lead to greater repeatability lot-to- lot. Low amplitude ripple will provide superior per- formance. High intercept and compression points will contribute to more linear system performance. MAMDCC0002 is ideally suited for wireless infra- structure applications. M/A-COM’s MADRCC0002 Dual Linearizer is de- signed to simplify the control of Vector Modulators. See Figure 1 and App Note AN3001.

Ordering Information

MAMDCC0002TR 1000 piece reel MAMDCC0002-DC000 Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Schematic Pin Configuration Pin No. Function Pin No. Function

1 NC 17 NC

2 NC 18 NC

3 NC 19 NC

4 NC 20 NC

5 NC 21 NC

6 NC 22 NC

7 NC 23 NC

8 NC 24 BIAS 2B

9 BIAS 1A 25 NC

10 NC 26 GND

11 GND 27 RF OUT

12 RF IN 28 GND

13 GND 29 NC

14 NC 30 BIAS 1B

15 BIAS 2A 31 NC

16 NC 32 NC

The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages)

Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Rev. V3 MAMDCC0002 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Frequency DCS Band PCS Band GHz GHz 1.805 1.93 1.88 1.99 Impedance — Ohms — 50 — Reference Loss Z = 50 Ohms dB -12.5 — -10.0 Attenuation Range Z = 50 Ohms Above Reference Loss dB 10 — — Phase Shift Range Z = 50 Ohms, Over minimum Attenuation Range deg 0 — 360 Amplitude Ripple Z = 50 Ohms, Ref Loss Z = 50 Ohms, 5 dB above Ref Loss Z = 50 Ohms, 10 dB above Ref Loss dB dB dB ±0.07 ±0.07 ±0.09 ±0.15 ±0.20 ±0.20 Deviation from Linear Phase Z = 50 Ohms, Ref Loss Z = 50 Ohms, 5 dB above Ref Loss Z = 50 Ohms, 10 dB above Ref Loss deg deg deg ±0.15 ±0.25 ±0.15 ±0.5 ±0.5 ±0.5 Return Loss - Input Return Loss - Output Over 10 dB Attenuation Range dB dB Input IP3 Over 10 dB Attenuation Range dBm — +41 — Input P1dB Over 10 dB Attenuation Range dBm — +29 — Noise Figure Over 10 dB Attenuation Range dB — — Note 1 Switching Speed 50% Control to 10% / 90% RF ns — 500 — I Supply — mA — — 25 1. Noise figure is approximately equ al to the absolute attenuation. Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Max. Input Power 1.7 to 2.1 GHz Other Frequencies +30 dBm +24 dBm DC Voltages4 Vbias1 or Vbasis2 +1.0V DC Current 50 mA Max per Bias Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Note that external dropping resistors are required to limit the current and voltage on the PIN diodes. Recommended PCB Configuration

Vector Modulator, 1.805 to 1.88 GHz (DCS) and 1.93 to 1.99 GHz (PCS) Rev. V3 MAMDCC0002 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. CSP-6, 4 x 6 mm, 32-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Schematic with Off-Chip Components Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. BIAS_1 MA MD CC0 0 02 VE C T OR MODUL ATOR 1A 1B 2A 2B BI AS_2 RF_ I N NO TES CAP ACITO RS ARE 10 0 PF IN DUC TOR S AR E COILCR AFT 0603C S-27N X-BC OR E QU IVALENT RF_O UT