MADR-007131 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Dual Linear Driver for Vector Modulators Rev. V2 MADR-007131 2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Electrical Specifications: TA = 25°C, Z0 = 50, Reference Figure 1 (Each Circuit) Parameter Test Conditions Units Min Typ Max Output Drive Current Vcontrol = VCC mA 20 — — +VCC Supply Range — V 4.5 5.0 5.5 IN, REF Voltage — V 0 — VCC +VCC Quiescent Current No Load µA — 50 70 Settling Time 50% Ctl to 90%/10% RF µS — 25 — Figure 1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. Table 1. Inductor Selection for M/A-COM Vector Modulators
Dual Linear Driver for Vector Modulators Rev. V2 MADR-007131 4 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Pin Configuration Pin No. Function Pin No. Function
1 NC 17 REF A
2 IN B 18 NC
3 NC 19 REF A
4 REF B 20 NC
5 NC 21 IN A
6 REF B 22 NC
7 NC 23 NC
8 REF B 24 NC
9 OUT B 25 NC
10 NC 26 NC
11 Vcc 27 NC
12 NC 28 GND
13 NC 29 NC
14 OUT A 30 NC
15 REF A 31 NC
16 NC 32 NC
The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) Absolute Maximum Ratings 1,2 Parameter Absolute Maximum +VCC +20 V IN A, IN B -0.5V < Input < Vcc +0.5V REF A, REF B -0.5V < Input < Vcc +0.5V Output Short Circuit Dura- tion3 Continuous Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C Package Power Dissipation Control Voltage 150 mW Lead Temperature 300ºC for 10 seconds 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. Additional heat sinking may be required for a continuous output short circuit to ground, to keep the junction temperature of the amplifier below 150°C. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Dual Linear Driver for Vector Modulators Rev. V2 MADR-007131 5 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Lead-Free 4x6 mm, 32-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations.
Dual Linear Driver for Vector Modulators Rev. V2 MADR-007131 7 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Figure 2—Block Diagram Vector Modulator
Dual Linear Driver for Vector Modulators Rev. V2 MADR-007131 8 8 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A -COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale.