MAG-TS SENSATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.sensata.com Copyright © 2018 Sensata Technologies, Inc. The flexibility of the MAG-TS encoder allows you to mount the tape around the circumference of a rotary table on a boring mill. Angular readings can now be displayed with the use of Newall ®’s DP1200 or SA100-R DRO. Newall®’s MAG-TS encoder consists of a reading head that travels along a magnetically encoded tape. The tape is made of a ferrous backing affixed to a flexible magnetized rubber substrate that is protected by a stainless steel cover strip. The MAG-TS can be mounted directly to the machine surface by using the provided adhesive strip. Alternatively, the tape can be attached to an optional backer bar that is then mounted to the machine surface. | MAG-TS Linear / Angular Magnetic Tape Encoder ELECTRICAL SPECIFICATIONS Introduction Angular Readings on a Rotary Table MAG-TS’s performance, design characteristics and ease of installation make it ideally suited for metal fabrication, sawing, woodworking and general measurement applications. Code Incremental Supply Voltage 5VDC +/-5% Current Typ. 150mA (250mA max.) Output Format Differential TTL Reference Mark Selectable Resolution 10µm (0.0005”) Measurement Speed 2Mhz
www.sensata.com CONTACT US Americas +1 614-771-0213 sales@newall.com Europe, Middle East & Africa +44 (0)116 264 2730 sales@newall.co.uk Asia Pacific China +82 21 2306 1560 sales@newall.com Taiwan +886-2-27602006 #2570 sales@newall.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Revised 3/29/18 ELECTRICAL SPECIFICATIONS Reader Head Dim. 51L x 24W x 26H Pole Pitch 2mm Environmental Rating IP67 Max. Length 20M (65.6’) Accuracy +/-25µm (±0.001”) Cable 3.5 meter SS armor with 9- Pin D style connector For more detailed specifications, visit sensata.com