MAFRIN0496 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Designed for RFID market
- 22dB Isolation typical
- 0.25dB Insertion Loss
- Low cost package
- 260°C Reflow Compatible
- RoHS* Compliant Version of the MAFRIN0449
Description
This circulator is designed specifically for RFID applications and features high reliability performance at a low cost. It is in a low cost package ideally suited for high volume manufacturing. M/A Com is one of the largest suppliers of isolator and circulators in the world. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Absolute Maximum Ratings 1. Operation of this device above any one of these parameters may cause permanent damage. Parameter Absolute Maximum Forward Power, CW 100 Watts Reverse Power, CW 100 Watts Peak Power 100 Watts Operating Temperature -10°C to +85°C Storage Temperature -40°C to +100°C Electrical Specifications — T = Top 1, Z0 = 50 Ohms Parameter Test Conditions Units Min Typ @25ºC Max Frequency Range MHz 860 872 Insertion Loss 860 MHz—872 MHz dB 0.21 0.25 Isolation 860 MHz—872 MHz dB 23.0 29.0 Return Loss 860 MHz—872 MHz, all ports dB 23.0 28.0 Circulation Clockwise 1. See “Absolute Maximum Ratings” for Top.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Single Junction Gull Wing Circulator
950 MHz—956 MHz
Rev. V2 MAFRIN0496 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
Ordering Information
Environmental Specifications Devices are designed to function after exposure to the shock, vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments. S-Parameters S-parameters are available on the M/A Com web- site at: S-Parameters Insertion Loss (S21) Isolation (S12) Return Loss (S11) Return Loss (S22) -50 -45 -40 -35 -30 -25 -20 860 861 862 864 865 866 868 869 870 871 Frequency (MHz) dB +25 C -10 C +85 C -0.30 -0.25 -0.20 -0.15 -0.10 860 861 862 864 865 866 868 869 870 871 Frequency (MHz) dB +25C -10C +85C -42 -37 -32 -27 -22 860 861 862 864 865 866 868 869 870 871 Frequency (MHz) dB +25C -10C +85C -40 -35 -30 -25 -20 860 861 862 864 865 866 868 869 870 871 Frequency (MHz) dB +25C -10C +85C
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Single Junction Gull Wing Circulator Rev. V2 MAFRIN0496 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Recommended PCB Layout Outline Drawing 1. Dimensions in mm. 2. Tolerances: ± 0.2 mm unless otherwise noted. 3. Use multiple plated thru holes in ground area under the hous- ing. 1. Dimensions in mm. 2. Tolerances: ± 0.3 mm unless otherwise noted. 3. Housing: Cold Rolled Steel with Sn 100% plating. 4. Cover: CRS with Sn 100% plating. 5. Leads: Copper.