MAFRIN0495 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
♦ RoHS Compliant ♦ BeO free Electrical Specifications Parameter Conditions Units Min Typ Max Frequency Range MHz 860 872 Impedance Ω 50 Insertion Loss dB 0.25 Isolation dB 23 VSWR 1.15:1 1. All specifications guaranteed over the operating temperature range unless otherwise stated. 2. See Application Note ANIv001 for further details . Absolute Maximum Ratings Parameter Conditions Units Min Max Input Power W 1000 Reverse Power W 500 Operating Temperature Range ºC v10 +85 Storage Temperature Range ºC v55 +125 Block Diagram CW Application Notes Available Application Note Description ANIv001 IMD Measurement of Ferrite Isolators and Circulators ANIv003 Maximum Peak Power of Ferrite Junctions ANIv004 Base Plate Temperature of Ferrite Isolators and Circulators ANIv008 Curie Temperature of Isolators and Circulators ANIv007 Reflow Soldering Guidelines ANIv009 Tape and Reel Information for Isolators and Circulators
Applications
♦ Wireless Infrastructure
Single Junction Circulator
860 MHz—872 MHz
Rev. B MAFRIN0495 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/AvCOM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/AvCOM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing 1. Dimensions in inches. 2. Tolerance: ±0.020” unless otherwise noted. 3. Lead thickness is 0.005”. 4. Model number, lot code and port designation prin ted on top side of unit. Section Material Plating Leads Copper Silver Housing Steel Tin Plating Rev Date By B 6/01/2010 BH