MAFRIN0332 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
♦ RoHS Compliant ♦ BeO free Electrical Specifications Parameter Conditions Units Min Typ Max Frequency Range MHz 860 960 Impedance Ω 50 Insertion Loss dB 0.40 Insertion Loss 902 MHz to 928 MHz dB 0.35 Isolation dB 20 Isolation 902 MHz to 928 MHz dB 22 VSWR 1.22:1 1. All specifications guaranteed over the operat ing temperature range unless otherwise stated. 2. See Application Note ANI-001 for further details. Pin Configuration Terminal Designation Function
1 Port 1 In
2 Port 2 Out
3 Port 3 Out
Parameter Conditions Units Min Max Input Power W 200 Reverse Power W 200 Operating Temperature Range ºC -10 +85 Storage Temperature Range ºC -55 +125 Functional Block Diagram CW Application Notes Available Application Note Description ANI-001 IMD Measurement of Ferrite Isolators and Circulators ANI-003 Maximum Peak Power of Ferrite Junctions ANI-004 Base Plate Temperature of Ferrite Isolators and Circulators ANI-008 Curie Temperature of Isolators and Circulators ANI-007 Reflow Soldering Guidelines ANI-009 Tape and Reel Information for Isolators and Circulators
Applications
♦ Wireless Infrastructure ♦ GSM
Single Junction Robust Lead Circulator
860 MHz—960 MHz
Rev. C MAFRIN0332 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing 1. Dimensions in mm. 2. Tolerance: ±0.2mm unless otherwise noted. 3. Lead thickness is 0.12mm. 4. Model number, lot code and port des ignation printed on top side of unit. Section Material Plating Leads Copper Gold Housing Steel Gold Plating Rev Date By C 16/9/2009 BH