MAFLCC0006 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Small Size and Low Profile
- Superior Repeatability
- Typical Insertion Loss 0.5 dB
- Typical Rejection 20 dB
- 2 Watt Power Handling
- Lead-Free SO-8 Package
- 100% Matte Tin Plating over Copper
- Halogen-Free “Green” Mold Compound
- 260°C Reflow Compatible
- RoHS* Compliant Version of FL07-0001-G
Description
M/A-COM’s MAFLCC0006 is an IC-based monolithic low pass filter in a low cost SOIC-8 plastic package. This filter is ideally suited for applications where small size, low cost, and low loss are required. Typical applications include base station switching networks and portable phones where size and PCB real estate are at a premium. Available in tape and reel. The MAFLCC0006 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.
Ordering Information
MAFLCC0006-TR 1000 piece reel MAFLCC0006-TB Sample Test Board Note: Reference Application Note M513 for reel size information. Functional Block Diagram Pin Configuration Pin No. Function Pin No. Function
1 GND 5 GND
2 RF IN 6 GND
3 GND 7 RF OUT
4 GND 8 GND
- Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. All unused pins must be RF and DC grounded. 2. Pins 1 and 4 are thermal ground contacts.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost SMT Low Pass Filter DC – 1000 MHz Rev. V2 MAFLCC0006 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss: DC – 1000 MHz dB — 0.5 1.0 VSWR: DC – 1000 MHz — — 1.3:1 1.6:1 Rejection: 1800 – 3500 MHz 2000 – 3000 MHz dB dB Absolute Maximum Ratings 3,4 Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. VSWR vs. Frequency Typical Performance Curves Insertion Loss vs. Frequency
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost SMT Low Pass Filter DC – 1000 MHz Rev. V2 MAFLCC0006 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. † Reference Application Note M538 for lead-free solder reflow recommendations. Lead-Free, SOIC-8†