MAFLCC0003 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- Small Size and Low Profile
- Superior Repeatability
- Passbands 824 – 960 MHz and 1850 – 1990 MHz
- Passbands 880 – 960 MHz and 1700 – 1900 MHz
- Typical Passband Insertion Loss: 0.5 dB
- 2 Watt Power Handling
- Low Cost
- Lead-Free SOT-26 Package
- 100% Matte Tin Plating over Copper
- Halogen-Free “Green” Mold Compound
- 260°C Reflow Compatible
- RoHS* Compliant Version of DP52-0005
Description
M/A-COM’s MAFLCC0003 is an IC-based Monolithic Diplexer in a low cost SOT-26 plastic package. This Diplexer is ideally suited for applications where small size, low insertion loss, superior repeatability, and low cost are required. Typical applications include AMPS/PCS and GSM/DCS dual mode portable de- vices. The MAFLCC0003 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability.
Ordering Information
MAFLCC0003-TR 1000 piece reel MAFLCC0003-TB Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin Configuration Pin No. Function Pin No. Function
1 AMPS IN/OUT 4 PCS IN/OUT
2 GND 5 GND
3 ANTENNA 6 GND
- All unused pins must be RF and DC grounded. Functional Block Diagram1 321 GND AMPS (IN/OUT) GND ANTENNA PCS (IN/OUT) GND HPF LPF
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V3 MAFLCC0003 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. 880 – 960 / 824 – 960 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.7 0.9 Stopband Isolation dB 17 19 — Passband VSWR — — 1.3:1 1.5:1 Recommended PCB Configuration Absolute Maximum Ratings 2.3 Parameter Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sens itive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1700 – 1900 / 1850 – 1990 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Passband Insertion Loss dB — 0.6 0.8 Stopband Isolation dB 17 20 — Passband VSWR — — 1.3:1 1.5:1
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Cost SMT Dual Band Diplexer AMPS/PCS and GSM/DCS Rev. V3 MAFLCC0003 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR vs. Frequency Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency Lead-Free, SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations.