MAFL-010639-CB0AD0-V5 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

 Surface Mount  75 Ohm  RoHS* Compliant  Pb Free  MoCA Application

Description

M/A-COM Technology Solutions’ MAFL -010639- CB0AD0 is a surface mount Band Pass Filter unit designed for MoCA applications. Product Image Recommended Maximum Ratings Parameter Value Storage Temperature -40C to +85ºC Operating Temperature -40C to +85ºC DC Current 30mA RF Power +23.9dBm (250mW) Transient Voltage 200V Functional Schematic Electrical Specifications: Z0 = 75Ω, TA = 25ºC, Pin = 0dBm Parameter Units Min Typ Max Common to MoCA / MoCA to Common Rejection 500 - 565 MHz 565 - 575 MHz 950 - 960 MHz 960 - 1220 MHz 1220-2000 MHz 2000 - 2500 MHz 2600 - 3000 MHz Insertion Loss 650 - 875 MHz dB dB dB dB dB dB dB dB -35 -30 -32 -34 -37 -35 -30 -38 -32 -36 -40 -42 -40 -33 -2.0 -3.0 Common Port Return Loss 650 - 875 MHz dB -9.5 -10 Pin Configuration Function Pin Number Common Port (Input) 8 MoCA Port (Output) 3 Ground 1 - 2, 4 - 7 Not connected -

Rev. V5 MAFL-010639-CB0AD0 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: Recommended PCB Configuration  Track dimension = 1.1mm  Gap dimension = 1.2mm  It is not recommended to run tracks under the filter unless they are greater than 1.6mm below the base.  Ground should be 1.6mm below the base of the filter  Area directly under the filter should be free from copper  RF shield should be kept a minimum of 6mm above the filter 1. Dimensions in mm. 2. Tolerance: ±0.1mm unless otherwise noted. 3. Model number and lot code printed on reel. 4. Plating finish: ENIG on both sides, 0.05 to 0.1 µm gold over 3 to 6 µm nickel

Rev. V5 MAFL-010639-CB0AD0 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves at +25°C Common Port Return Loss Insertion Loss Frequency (MHz) S11 (dB) -30 -27 -24 -21 -18 -15 -12 Frequency (MHz) 300 570 840 1110 1380 1650 1920 2190 2460 2730 3000 Frequency (MHz) S21 (dB) -80 -72 -64 -56 -48 -40 -32 -24 -16 Frequency (MHz) 300 570 840 1110 1380 1650 1920 2190 2460 2730 3000

Rev. V5 MAFL-010639-CB0AD0 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Part Number Description MAFL-010639-CB0AD0 Tape & Reel MAFL-010639-CB0ATB Customer Evaluation Board

Ordering Information

Tape & Reel Information Parameter Units Value Qty per reel - 500 Reel size mm 330 Tape width (W) mm 32.0 Pitch (P1) mm 20.0 A0 mm 15.3 B0 mm 15.3 K0 mm 3.70 Orientation dot