MAFA-1000 EMCORE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Full Function Fiber Optic Amplifier Ready for Integration Low Noise Figure (Typ < 4.5 dB) Pin: -6 dBm to +12 dBM Pout: +14 dBm to +23 dBm RS-232 Monitor and Control Interface (SNMP V.1 is also possible) Standard and Optional Gain Flatness Low Electrical Power Consumption Input/Output Isolation >40/40 dB Polarization Dependant Gain < 0.1 dB Polarization Mode Dispersion < 0.2 ps Input & Output Return Losses < -40 dB Output Residual Pump Power < -30 dBm Back Reflection Monitoring MAFA 1000 Series Erbium Doped Fiber Micro Amplifier EMCORE’s MAFA 1000 Series Erbium Doped Fiber micro Amplifier (μEDFA) Gain Block Module is an ideal building block for OEM system integrators. The family of MAFA 1000 EDFA Gain Blocks is designed to meet the most demanding noise performance requirements of fiber optic communications and control systems, and performs all the functions required of an optical amplifier for system integration. MAFA 1000 series EDFA Gain Blocks provide input and output optical isolation for stable, low noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level or with active output power control for constant gain mode operation. The MAFA 1000 series EDFA Gain Blocks also provide monitors and associated alarms for all critical operating parameters. The optical output of the MAFA 1000 series EDFA Gain Blocks can be split into multiple ports by optional external splitter. Optional back reflection monitoring feature enables safe output optical power managing. The compact mechanical footprint of the MAFA 1000 allows using this unit to be installed in small space environments. MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012 FIBER OPTICS | REV 2012.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Optical/Electrical Characteristics1 Property Unit Limit Models Comments 1014 1017 1020 1022 1023 Operating Input Power Pin (dBm) Max 12 12 12 12 12 Operating Input Power Pin (dBm) Min -6 -6 -6 -6 -6 Typical (May vary for some models) Output Power Po(dBm) Nominal 14 +/-.25 +/- .25 +/- .25 +/- .25 +/- .25 Note 2 (Notes 3, 7, 8) Power Consumption (Steady state) Psys(W) Max 2 3 5 6 8 70 o C Case Notes: 1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges 2. Measurement variations 3. Measured with 8 evenly spread input optical signals @ 25°C, Pin ≈ 0 dBm. Measuring with 1 input optical signal with Pin ≈ 0 dBm and ≈ 1550 nm is also available 4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25C 5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt ≈ Pp+20 dB; Pt + Pp ≈ 0 dBm) @ 25C; Gain Flattened Options with ΔG ≤ +/-0.75dB or ΔG ≤ +/-1.0dB are available (for some models and for defined input optical power only) 6. Over polarization and temperature 7. Specific ΔG can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0 dBm 8. If input power monitoring and input isolation are required then typical NF (Typ) for all units @ Pin = 0 dBm as 4.5 dB General and Mechanical Specifications Property Requirement Comments Operating Wavelength 1532nm ~ 1565nm Standard Operating Case Temperature 0C to 50C Standard* Storage Temperature -40C to 85C Standard Operating Humidity 20% to 85% Non-condensing Voltage Supply Range +12VDC/+5VDC/+3.3VDC All versions** Optical Connectors SC; FC; E2000 User Specified Dimensions (mm) 70 x 90 x 15 All versions * - Extended temperature range of –40C to +75C is also possible ** Transient Pulse to +X.XVDC + 5% for < 100 msec MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012 FIBER OPTICS | REV 2012.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Outline Drawing (dimensions in mm) Compliance and Reliability Information FCC: Subpart B. Part 15 clas s “A”: Unintentional Radiators EN 55013: Sound and Television Broadcast receivers and associated equipment – Radio disturbance characteristics- limits and methods of measurements – Electric Field Radiation Emissions (2001) Fit Rate: 90% level of confidence - 290 @ 25C MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012 FIBER OPTICS | REV 2012.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Electrical Connector Pinout PIN # Designation PIN # Designation 1 +12VDC/+5VDC/+3.3VDC 16 LED_Laser_ON 2 +12VDC/+5VDC/+3.3VDC 17 Display_SCLK** 3 +12VDC/+5VDC/+3.3VDC 18 Pump_Bias_Alarm * 4 +12VDC/+5VDC/+3.3VDC 19 Loss_Input_Power *
5 GND 20 Loss_Output_Power *
6 GND 21 Display_MOSI**
7 RS232_Rx 22 Display_SS**
8 RS232_Tx 23 Back_Reflection_Alarm *
9 GND 24 Key_Switch
10 GND 25 Key_Right
11 LED_Comm 26 Key_Left
12 EDFA_Reset 27 Key_Up
13 EDFA_Disable 28 Key_Down
14 Pout_Mute 29 CAN+***
15 EDFA_Temp_Alarm * 30 CAN-***
- - software adjustable parameters; logic levels (low / high) TBD - signals for driving VFD display * - signals for enabling SNMP
Ordering Information
Power Level Connector Option GF/NF Options Temp Options Voltage Options 1014 – 14 dBm SC1 - SC/APC 00 - Standard 1 – “+12VDC” 1017 – 17 dBm S21 - SC/PC 01 – Gain Flattened option S- Standard 2 – “+5VDC” 1020 – 20 dBm FC1- FC/APC 02 – No Pin monitoring, low NF option 3 – “+3.3VDC” 1020 – 22 dBm FC2- FC/PC 03 – Standard with back reflection monitoring E – Extended 1023 – 23 dBm EC1-E2000/APC EC2-E2000/PC Example: MAFA1014-SC-00-S-2: 14 dBm gain block with SC/APC optical connectors, standard NG/GF, standard temperature range, +5VDC power supply Note: Only some models can be order with Gain Flattened options. (-01 suffixes). Please contact your Sales Representative for details MAFA 1000 Series EDFA
DATASHEET | SEPTEMBER 2012 FIBER OPTICS | REV 2012.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Laser Safety Information This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product. The laser product report has been submitted to the CDRH and the accession number is expected by October 2006. Wavelength = 1535 ~ 1565 nm (dependant on input source) Maximum Output Power = 0.2 W (single output, 23 dBm model) MAFA 1000 Series EDFA