DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190214 (1/4) suppression-filter_commercial_maf2520a_en.fm EMC Components Noise suppression filter For LED lights, DC power supply for home appliances (Radiated noise suppression) MAF series MAF2520A type
FEATURES
This product is designed to reduce low-frequency (20 to 100 MHz) radiation noise for LED lighting and home appliances. It is smaller than the winding type and has the same noise suppression effect. Contributes to meeting CISPR standards with LED lighting and home appliances. Operating temperature range: –40 to +125°C (including self-temperature rise) APPLICATION LED lighting equipment Home appliances (refrigerators, air conditioners, washing machines, vacuum cleaners) PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment ˎEquivalent measurement equipment may be used. Rated current vs. temperature characteristics (derating) MAF 2520 A SS 600 C T 000 Series name L×W×T dimensions Characteristics Internal code Impedance Internal code Packaging style Internal code2.5×2.0×0.85 mm () at 1MHz Impedance DC resistance Rated current Part No. [1MHz] Itemp 60 45 0.364 0.280 700 MAF2520ASS600CT000 Measurement item Product No. Manufacturer Impedance 4294A+16034G Keysight Technologies DC resistance Type-7561 Y okogawa 0–55 –35 –15 5 25 45 65 85 105 125 Temperature (°C) Rated current (mA) 200 400 600 800 REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190214 (2/4) suppression-filter_commercial_maf2520a_en.fm EMC Components MAF2520A type Z, X, R VS. FREQUENCY CHARACTERISTICS INSERTION LOSS VS. FREQUENCY CHARACTERISTICS 1 10 100 1000 Frequency (MHz) Impedance (Ω) Z R X 1000 2000 3000 4000 5000 Frequency(MHz) 1 10 100 1000 Insertion Loss(dB)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190214 (3/4) suppression-filter_commercial_maf2520a_en.fm EMC Components MAF2520A type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating temperature range includes self-temperature rise. The storage temperature range is for after the assembly. Dimensions in mm 2.50±0.15 2.00±0.150.85±0.15 2.0 1.40.7 0.7 Dimensions in mm Natural cooling 10s 60 to 120s Preheating 30 to 60s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Peak Temperature Type A B K Package quantity 3,000 pcs/reel Operating temperature range Storage temperature range Individual weight –40 to +125 °C –40 to +85 °C 20 mg ø180±2.0 2.0±0.5 ø13±0.2 ø21±0.8 Dimensions in mm 1.0 ø60min. 14.4max. 8.4 +2.0 –0.0 K 8.0±0.3 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.05 Dimensions in mm Sprocket hole 1.5 +0.1 Cavity 160min. Taping 200min. 300min.Drawing direction Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20190214 (4/4) suppression-filter_commercial_maf2520a_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS