MADR-009190 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free “Green” Mold Compound RoHS* Compliant
Description
The MADR -009190-000100 is a four channel driver used to translate TTL control inputs into gate control voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. The output HIGH level is optionally 0 to 2 V (relative to GND) to optimize the intermodulation products of FET control devices at low frequencies. For driving PIN diode circuits, the outputs are nominally switched between +5 V & -5 V. The actual driver output voltages will be lower when driving large currents due to the resistance of the output devices. Ordering Information1 Part Number Package MADR-009190-000100 Bulk Packaging MADR-009190-000DIE 100 piece waffle pack MADR-009190-0001TR 1000 piece reel MADR-009190-00GDIE 100 piece gel pack Functional Schematic * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. Pin Configuration2 Pin No. Function Pin No. Function
1 VEE 9 Output A1
2 VCC 10 Output B1
3 C4 11 Output A2
4 C3 12 Output B2
5 C2 13 Output A3
6 C1 14 Output B3
7 VOPT 15 Output A4
8 Ground 16 Output B4
- The bottom of the die should be isolated for part number MADR-009190-000DIE and MADR-009190-00GDIE 1. Reference Application Note M513 for reel size information. VCC VOPT Output A1 VEE Output B1 Logic C1 TTL Buffer Level Shifter Driver 1 Inverter Level Shifter Output A2 VEE Logic C4 Logic C3 Logic C2 Same as Driver 1 VOPT Output B2 Output A3 Output B3 Output A4 Output B4 Same as Driver 1 Same as Driver 1
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 2 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC Characteristics over Guaranteed Operating Range Symbol Parameter Test Conditions Units Min. Typ. Max. VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — — VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8 VOH Output High Voltage IOH = -0.5 mA V VOPT - 0.1 — — VOL Output Low Voltage IOL = +0.5 mA V — — VEE + 0.1 IIN Input Leakage Current (per input) VIN = VCC or GND, VEE = min, VCC = max, VOPT = min or max nA -250 — 250 IOH DC Output Current - High (per output) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V mA -35 — — IOL DC Output Current - Low (per output) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V mA — — 35 IOH_SPIKE Peak Spike Output Current (Rising Edge) (per output) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V, CL = 25 pF mA — 35 — IOL_SPIKE Peak Spike Output Current (Falling Edge) (per output) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V, CL = 25 pF mA — 50 — ICC Quiescent Supply Current VIN = VCC or GND, VEE = -10.5 V, VCC = +5.5 V, VOPT = +5.5 V, No Output Load µA — — 20 ∆ ICC Additional Supply Current (per TTL input pin) VCC = max, VIN = VCC -2.1 V mA — — 1.0 IEE Quiescent Supply Current VIN = VCC or GND, VEE = -10.5 V, VCC = +5.5 V, VOPT = +5.5 V, No Output Load µA — — 20 IOPT Quiescent Supply Current VIN = VCC or GND, VEE = -10.5 V, VCC = +5.5 V, VOPT = +5.5 V, No Output Load µA — — 20 RNFET Output Resistance NFET On (to VEE) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V, VOUT = -4.9 V +25°C, Note 3 Ω — 40 — RPFET Output Resistance PFET On (to VOPT) VCC = +5.0 V, VEE = -5.0 V, VOPT = +5.0 V, VOUT = +4.9 V +25°C, Note 3 Ω — 45 — 3. See plot of RNFET and RPFET for variations over temperature for driving 4.99k and 82 ohm resistive load. (Note that this corresponds to 1 mA and 33 mA currents at +25°C).
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 3 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Output Resistance vs. Temperature6 6. Output resistance were measured under the condition of VCC = +5 V, VOPT = +5 V, and VEE = -5 V, with load resistors from outputs to ground. 20.0 40.0 60.0 80.0 100.0 120.0 Temperature (C) Resistance (Ohms) PFET with 82Ω load NFET with 82Ω load PFET with 4.99k load NFET with 4.99k load Symbol Parameter Typical performance Unit -40°C +25°C +85°C TPLH Propagation Delay ns 20 22 25 TPHL Propagation Delay ns 20 22 25 TTLH Output Transition Time (Rising Edge) ns 5 6 8 TTHL Output Transition Time (Falling Edge) ns 5 6 8 Tskew Delay Skew ns 2 2 2 PRF (max.) 50% Duty Cycle MHz DC — 10 CIN Input Capacitance pF 5 5 5 CPDC Power Dissipation Capacitance5 pF 50 50 50 CPDE Power Dissipation Capacitance5 pF 100 100 100 4. VCC = 4.5 V, VOPT = 0 V, VEE = min or max, CL = 25 pF, input LOGIC1 = 3 V, LOGIC0 = 0 V, TRISE, TFALL = 6 ns. 5. Total Power Dissipation is calculated by the following formula: PD = VCC 2fC PDC + VEE 2fCPDE. AC Characteristics Over Guaranteed Operating Range4 Truth Table Input Outputs Cn An Bn Logic “0” VEE VOPT Logic “1” VOPT VEE Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 4 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Guaranteed Operating Ranges (for driving FET or PIN devices)7,8,9 Symbol Parameter Unit Min. Typ. Max. VCC Positive DC Supply Voltage V 4.5 5.0 5.5 VEE Negative DC Supply Voltage V -10.5 -5.0 -4.5 VOPT 10,11 Optional DC Output Supply Voltage V 0 — VCC VOPT - VEE Negative Supply Voltage Range V 4.5 Note 10,11 16.0 VCC - VEE Positive to negative Supply Range V 9.0 10.0 16.0 TOPER Operating Temperature °C -40 +25 +85 IOH DC Output Current - High mA -35 — — IOL DC Output Current - Low mA — — 35 TRISE, TFALL Maximum Input Rise or Fall Time ns — — 500 7. Unused logic inputs must be tied to either GND or VCC. 8. MACOM recommends that VCC be powered on before VEE, and powered off after VEE. 9. 0.01 µF decoupling capacitors are required on the power supply lines. 10. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of GaAs control devices at low frequencies, VOPT can be increased to between 1 and 2 V. The nonlinear characteristics of the GaAs control devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will increase when positive controls are applied. 11. When this driver is used to drive PIN diodes, VOPT is often set to +5 V, with VEE set to -5 V.
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 5 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Absolute Maximum Ratings12 Symbol Parameter Unit Min. Max. VCC Positive DC Supply Voltage V -0.5 7.0 ICC Positive DC Supply Current VEE Negative DC Supply Voltage V -11.0 0.5 IEE Negative DC Supply Current (per Output)13 mA -50 — VOPT Optional DC Output Supply Voltage V -0.5 VCC +0.5 IOPT Optional DC Output Supply Current (per Output)13 V — 50 VOPT - VEE Output to Negative Supply Voltage Range V -0.5 18.0 VCC - VEE Positive to Negative Supply Voltage Range V -0.5 18.0 VIN DC Input Voltage V -0.5 Note 14 VCC +0.5 VO DC Output Voltage V VEE – 0.5 VOPT + 0.5 PD
15 Power Dissipation in Still Air W — 1
TOPER Operating Temperature °C -55 125 TSTG Storage Temperature °C -65 150 ESD ESD Sensitivity kV 2.0 — 12. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures. 13. The maximum IEE and IOPT are specified under the condition of VCC = +5.5 V, VEE = -5.5 V, VOPT = +5.5 V, and the total power dissipation is within 1 W in still air. 14. If VCC ≥ 6.5 V, then the minimum for VIN is VCC - 7.0 V. 15. Derate -7 mW/°C from 65°C to 85°C.
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 6 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Switching Waveforms Equivalent Output Circuit for An and Bn Outputs (33 mA load at 25°C) 1.3V 10% 90% Tr Tf TPLH TPHL TSKEW TSKEW 50% TTLH TTHL 90% 10%OUTPUT A OUTPUT B INPUT C VIN LOGIC 1 LOGIC 0 1.3V 90% 10% 50% 90% 10% VOUT OUTPUT HIGH OUTPUT LOW PFET 62 ohms Vopt NFET 67 ohms Vee An and Bn Outputs
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 7 7 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 16. Only one section of MADR-009190 is shown. The other three sections will have equivalent performance. .01 µF RF2 RF1 RF SECTION Rc RF Common 560 pF 560 pF MADR-009190- 000100 GND VEE -5V Logic VCC +5V .01 µF VOPT Typical Application for a SPDT Switch16 Description of Circuit The MADR-009190 provides four pairs of complementary outputs that are each capable of driving a maximum of ±35 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with the current setting resistor (R1 & R2), additional spiking current can be achieved. To achieve the Non -Inverting and Inverting complementary voltages, each output is switched between two internal FETs. The FETs are connected to V OPT for the positive output and V EE for the negative output. VOPT and VEE are adjustable for various configurations and have the following limitations: V EE can be no more negative than -10.5 volts; VOPT can be no more positive than +5.5 volts and VOPT must always be less than or equal to VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to by the logic input. The most common configuration is to drive VEE at -5.0 volts with VCC and VOPT tied together at +5.0 volts.
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 8 8 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support † Reference Application Note M538 for lead-free solder reflow recommendations. Plating is 100% matte tin over copper. Lead-Free, SOIC-16†
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 9 9 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Die Outline Pad Configuration17,18 Die Size: 1325 x 1735 µm (nominal) Pad No. X (µm) nominal Y (µm) nominal Pad Size (µm) X x Y 0 0 0 Lower left edge of die 1 482.95 1489 85 x 85 2 217.85 1534.6 85 x 85 3 200.45 1407.9 85 x 85 4 200.45 1114.2 85 x 85 5 200.45 820.45 85 x 85 6 200.45 526.8 85 x 85 7 200.45 229.35 85 x 85 8 395.6 157.95 85 x 85 9 777.55 181.5 132 x 94 10 1126.35 181.75 132 x 94 11 1126.35 436.85 132 x 94 12 1126.35 691.95 132 x 94 13 1126.35 947.05 132 x 94 14 1126.35 1202.15 132 x 94 15 1126.35 1457.3 132 x 94 16 767.9 1553.5 132 x 94 17 1325 1735 Upper right edge of die 17. All X,Y dimensions are at bond pad center. 18. Die thickness is 8.0 mils.
Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V6 MADR-009190 10 10 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale.