MADR-007097-000100 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Moderate Speed, CMOS Technology (25 nS)
  • Complementary Outputs
  • High Drive Current Capability (± 50 mA)
  • Low Current Consumption
  • Plastic SOIC Body for SMT Applications
  • Tape and Reel Packaging Available
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of DR65-0003

Description

M/A-COM's MADR-007097-000100 is a SPDT driver used to interface between TTL logic signals and PIN diode based microwave switches. High-speed analog CMOS technology is used to achieve low power consumption at moderate speeds. Low output resistances allow it to develop high output current spikes to ensure fast switching speeds. The complementary output stages are structured so it can be used as an inverting or non-inverting driver for SPST switches, or as a single input, complementary driver for SPDT switches. The monolithic die is packaged in a SO-8, plastic surface mount package and is available in tape and reel packaging for high volume applications. The MADR- 007097-000100 driver is ideally suited for driving M/ A-COM’s line of HMIC switches.

Ordering Information

MADR-007097-000100 Bulk Packaging MADR-007097-0001TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Functional Block Diagram Pin Configuration Pin No. Function Pin No. Function

1 NON-INV OUT 5 VEE

2 GND 6 VDD

3 VCC 7 GND

(TTL Logic)

8 INV OUT

  • Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Rev. V3 MADR-007097-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = +25°C, +Vcc = + Vdd = + 5.0V ± 5%, Vee = - 5.0V ±5%, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Switching Speed 1 Delay Rt/Ft Spike current into 10 ohm load 50 % TTL to 90% 10%-90%; 90%-10% ns ns PRF 50% duty cycle MHz DC — 5 Output Voltage Drop, No Load With reference to supply voltage V — — 0.25 DC Output Current Peak Spike Output Current Load Dependant Spiking Capacitor in Circuit mA mA ±30 ±150 ±50 ±200 Output Stage on Resistance Positive Output FET, Qp Negative Output FET, Qn Ω Ω Quiescent Supply Currents +5V -5V mA mA 1.5 TTL Levels Logic “0” @ 20 µA sink current Logic “1” @ 20 µA source current V V 2.0 5.0 Package Dissipation — mW — — 200 Absolute Maximum Ratings 2,3 Parameter Absolute Maximum VCC -0.5V ≤ VCC ≤ +7.0V VDD -0.5V ≤ VDD ≤ VCC VEE -7.0V ≤ VEE ≤ +0.5V C1 (TTL Input Voltage) -0.5V to Vcc +0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 1. Decoupling capacitors (.01 µF) are required on power supply lines.

Rev. V3 MADR-007097-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. SPDT Microwave Switch with Driver

Rev. V3 MADR-007097-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. † Reference Application Note M538 for lead-free solder reflow recommendations. Lead-Free, SOIC-8†