MACDG-26S MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching MAD STANDARD TO-5 DIODE SUPPRESSED HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/15 ■ Suppression diode ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching MAT STANDARD TO-5 DIODE SUPPRESSED/TRANSISTOR DRI- VEN HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-28776/1 ■ Transistor driver & suppression diode ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching MADD STANDARD TO-5 DIODE SUPPRESSED/PROTECTED HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/20 ■ Suppression & protection diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Spreader pads ■ Excellent RF switching X1 X2 A2 B2 A1 B1 A3 B3 X2 X1 A2 B2 A1 B1 A3 B3 X2 X1 A2 B2 A1 B1 A3 B3 X2 X1 A2 B2 A1 B1 A3 B3 XB TO-5 HIGH-PERFORMANCE RELAYS CONTACT RATINGS CONTACT TYPE OPERATIONS LOAD MIN.

1.0 A @ 28 Vdc Resistive 100,000

250 mA @ 115 Vac, 60 Hz & 400 Hz Resistive (case not grounded) 100,000 100 mA @ 115 Vac, 60 Hz & 400 Hz Resistive 100,000 0.2 A @ 28 Vdc Inductive (0.32 Henry) 100,000

0.1 A @ 28 Vdc Lamp 100,000

30 µA @ 50 mVdc Low Level 1,000,000

0.1 A @ 28 Vdc Intermediate Current 50,000

ELECTRICAL CHARACTERISTICS

2 Form C (DPDT)

Stationary: Gold/platinum/palladium/silver alloy (gold plated) Moveable: Gold/platinum/palladium/silver alloy (gold plated) CONTACT RESISTANCE Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) MECHANICAL LIFE EXPECTANCY 1 million operations COIL VOLTAGE 5 to 30 Vdc COIL POWER 675 mW max. @ 25°C DUTY CYCLE Continuous PICK-UP VOLTAGE Approximately 50% of nominal coil voltage PICK-UP SENSITIVITY 130 mW max. @ 25°C OPTIONAL PINS .280 (7.11) MAX .335 (8.51) DIA MAX .370 (9.40) DIA MAX -.001 .370 (9.40) DIA MAX GROUND PIN (OPTIONAL) .031 ± .003 (0.79) 36° ± 3° .035 (0.89) .200 (5.08) DIA TRANSISTOR BASE CONNECTION (MAT ONLY) ENCLOSURE HEADER MA MAD MADD MAT TERMINAL VIEW TERMINAL VIEW TERMINAL VIEW TERMINAL VIEW TERMINALS W 1.500 MIN (38.1) C .500 MIN (12.7) (Length excludes mounting pad) CII Products, 1396 Charlotte Hwy. P .O. Box 520 Fairview, NC 28730 (828) 628-1711 Fax(828) 628-1439

.370 (9.40) SQ MAX .100 (2.54) .100 (2.54) .103 (2.62) .150 (3.81) .156 (3.96) .395 (10.03) SQ MAX .100 (2.54) 0.47 (1.19) DIA .014±.003 (0.36) .140 – .175 DIA (3.56 – 4.45) TO-5 HIGH-PERFORMANCE RELAYS COIL DATA NOM. COIL COIL CIRCUIT COIL CIRCUIT PICKUP BASE TURN PICKUP BASE TURN DROP-OUT DROP-OUT NOM. COIL MAX. COIL COIL RESISTANCE CURRENT CURRENT VOLTAGE ON CURRENT VOLTAGE ON CURRENT VOLTAGE VOLTAGE POWER COIL DESIG. (Note 1) (Note 1&2) (Note 1&2) (Note 2) (Note 2) (Note 2) (Note 2) MA/MAD MADD MAT Note 1: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 2 5°C for 5 seconds max. Note 2: Set base current at 3 mA to 15 mA during measurements. OPERATING CHARACTERISTICS TIMING OperateTime: 2.0 ms max. ReleaseTime: MA: 1.5 ms max. MAD/MADD: 4.0 ms max. (suppression diode, suppression/steering diodes) MAT: 7.5 ms max. (transistor driven) CONTACT BOUNCE 1.5 ms max DIELECTRIC WITHSTANDING VOLTAGE Between Open Contacts:

500 Vrms 60 Hz

Between Adjacent Contacts: Between Contacts & Coil: 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE -65°C to +125°C WEIGHT 0.09 oz. (2.55 gms) 0.10 oz. (2.80 gms) with spreader pad attached VIBRATION RESISTANCE

30 G’s, 10 to 3,000 Hz

75 G’s, 6 ±1 ms max. QPL APPROVAL MIL-R-39016/9 (JMA) MIL-R-39016/15 (JMAD) MIL-R-39016/20 (JMADD) MIL-R-28776/1 (JMAT) SEMICONDUCTOR CHARACTERISTICS DIODE

100 Vdc peak inverse voltage (PIV)

1.0 Vdc max. transient voltage TRANSISTOR 0.3 Vdc min. base turn off voltage 6.0 Vdc min. emitter-base breakdown voltage (BVEBO) @ 25°C 80.0 Vdc min. collector-base breakdown voltage (BVCBO) @ 25°C & IC=100 µA S S2 W SPREADER & MOUNTING PADS DIODES SPECIFYING A PART NUMBER EXAMPLE : TYPE TERMINALS TRANSISTOR GROUND PINS COILS SPREADER /MOUNTING PADS MA C D G -26 S