MAC6068C DIGITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

144 Market Street

phone +1.908.245-7200 MAC6068C-MAC6075C SI LICON BIDIRECTIONAL THYRISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive off-state voltage(1) (TJ = 110°C) MAC6068C MAC6069C MAC6070C MAC6071C MAC6073C MAC6074C MAC6075C V DRM 100 200 400 500 600 Volts RMS on-state current (TC = 85°C) IT(RMS) 4.0 Amps Peak non-repetitive surge current (1 cycle, 60 Hz, TJ = -40 to +110°C) ITSM

30 Amps

Circuit fusing considerations (TJ = -40 to +110°C, t = 1.0 to 8.3ms) I2t 3.6 A2s Peak gate power PGM 10 Watts Average gate power PG(AV) 0.5 Watts Operating junction temperature range TJ -40 to +110 °C Storage temperature range Tstg -40 to +150 °C Mounting torque (6-32 screw) (2) 8.0 In. lb. Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage. Note 2: Torque rating applies with use of torque washer. Mounting torque in excess of 6 in. lb. does not appreciably lower case to sink thermal resistance. Main terminal 2 and heatsink contact pad are common. * Soldering temperatures shall not exceed 200°C for 10 seconds. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 3.5 °C/W Thermal resistance, junction to ambient RӨJA 60 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage, unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak blocking current (either direction) (Rated VDRM @ TJ = 125°C, gate open) IDRM 2.0 mA Peak on-state voltage (either direction) (ITM = 6.0A peak) VTM

2.0 Volts

(VD = 12V, RL = 100Ω, TJ = -40°C) MT2(+),G(+); MT2(-),G(-), all types MT2(+),G(-); MT2(-),G(+), all types (VD = Rated VDRM, RL = 10kΩ, TJ = 110°C) MT2(+),G(+); MT2(-),G(-), all types MT2(+),G(-); MT2(-),G(+), all types V GT 0.2 0.2 1.4 1.4 2.5 2.5 Volts Holding current (either direction) (VD = 12V, gate open, TJ = -40°C, initiating current = 1A) MAC6068C-MAC6075C T J = 25°C MAC6068C-MAC6075C IH mA sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130213

phone +1.908.245-7200 MAC6068C-MAC6075C SI LICON BIDIRECTIONAL THYRISTORS Characteristic Symbol Min Typ. Max Unit Turn on time (either direction) (ITM = 14A peak, IGT = 100mA) ton 1.5 - µs Blocking voltage application rate at commutation @ VDRM (TJ = 85°C, gate open) dv/dt 5.0 - V/µs Quadrant Characteristic Symbol I mA II mA III mA IV mA Peak gate trigger current (Main terminal voltage = 12V, RL = 100Ω, TJ = 25°C) (Main terminal voltage = 12V, RL = 100Ω, TJ = -40°C) IGTM MECHANICAL CHARACTERISTIC Case TO-126 Marking Body painted, alpha-numeric Pin out See below TO-126 Inches Millimeters Min Max Min Max A 0.425 0.435 10.80 11.050 B 0.295 0.305 7.490 7.750 C 0.095 0.105 2.410 2.670 D 0.020 0.026 0.510 0.660 F 0.115 0.125 2.920 3.180 G 0.091 0.097 2.310 2.460 H 0.050 0.095 1.270 2.410 J 0.015 0.025 0.380 0.640 K 0.595 0.655 15.110 16.640 M 3° TYP 3° TYP Q 0.148 0.158 3.760 4.010 R 0.045 0.055 1.140 1.400 S 0.025 0.035 0.640 0.890 U 0.145 0.155 3.680 3.940 V 0.040 - 1.020 - sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130213

phone +1.908.245-7200 MAC6068C-MAC6075C SI LICON BIDIRECTIONAL THYRISTORS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130213

phone +1.908.245-7200 MAC6068C-MAC6075C SI LICON BIDIRECTIONAL THYRISTORS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130213