MAC4M ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

 Semiconductor Components Industries, LLC, 1999 February, 2000 – Rev. 1

1 Publication Order Number:

/C0077/C0065/C0067/C0052/C0077/C0044 /C0077/C0065/C0067/C0052/C0078 Preferred Device /C0084/C0114/C0105/C0097/C0099/C0115 Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required.

  • Blocking V oltage to 800 V olts
  • On-State Current Rating of 4.0 Amperes RMS at 100°C
  • Uniform Gate Trigger Currents in Three Modes
  • High Immunity to dv/dt — 500 V/µs minimum at 125°C
  • Minimizes Snubber Networks for Protection
  • High Surge Current Capability – 40 Amperes
  • Industry Standard TO-220AB Package
  • High Commutating di/dt — 6.0 A/ms minimum at 125°C
  • Operational in Three Quadrants: Q1, Q2, and Q3
  • Device Marking: Logo, Device Type, e.g., MAC4M, Date Code MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off–State Voltage(1) (TJ = –40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open) MAC4M MAC4N VDRM, VRRM 600 800 Volts On-State RMS Current (Full Cycle Sine Wave, 60 Hz, TC = 100°C) IT(RMS) 4.0 Amps Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TJ = 125°C) ITSM 40 Amps Circuit Fusing Consideration (t = 8.33 ms) I2t 6.6 A2sec Peak Gate Power (Pulse Width ≤ 1.0 µs, TC = 100°C) PGM 0.5 Watt Average Gate Power (t = 8.3 ms, TC = 100°C) PG(AV) 0.1 Watt Operating Junction Temperature Range TJ –40 to +125 Storage Temperature Range Tstg –40 to +150 (1) VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. TRIACS

4 AMPERES RMS

Preferred devices are recommended choices for future use and best overall value. Device Package Shipping

ORDERING INFORMATION

MAC4M TO220AB 50 Units/Rail MAC4N TO220AB TO–220AB CASE 221A STYLE 4 2 3 PIN ASSIGNMENT

3 Gate

4 Main Terminal 2

http://onsemi.com

50 Units/Rail

G MT2

MAC4M, MAC4N http://onsemi.com THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance — Junction to Case — Junction to Ambient R θJC R θJA 2.2 62.5 °C/W Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds TL 260 °C ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Peak Repetitive Blocking Current (VD = Rated VDRM , VRRM ; Gate Open) T J = 25°C TJ = 125°C IDRM , IRRM — 0.01 2.0 mA ON CHARACTERISTICS Peak On-State Voltage(1) (ITM = ± 6.0 A) VTM — 1.3 1.6 V Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 Ω ) MT2(+), G(+) MT2(+), G(–) MT2(–), G(–) IGT 8.0 8.0 8.0 mA Holding Current (VD = 12 V, Gate Open, Initiating Current = ±200 mA) IH 6.0 20 35 mA Latching Current (VD = 12 V, IG = 35 mA) MT2(+), G(+) MT2(+), G(–) MT2(–), G(–) IL mA Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 Ω ) MT2(+), G(+) MT2(+), G(–) MT2(–), G(–) VGT 0.5 0.5 0.5 0.8 0.8 0.8 1.3 1.3 1.3 V DYNAMIC CHARACTERISTICS Rate of Change of Commutating Current (VD = 400 V, ITM = 4.0 A, Commutating dv/dt = 18 V/µs, Gate Open, TJ = 125°C, f = 250 Hz, CL = 5.0 µF, LL = 20 mH, No Snubber) (di/dt)c 6.0 8.4 — A/ms Critical Rate of Rise of Off-State Voltage (VD = 0.67 x Rated VDRM , Exponential Waveform, Gate Open, TJ = 125°C) dv/dt 500 1500 — V/µs Repetitive Critical Rate of Rise of On-State Current IPK = 50 A; PW = 40 µsec; diG/dt = 200 mA/µsec; f = 60 Hz di/dt — — 10 A/µs (1) Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.

MAC4M, MAC4N http://onsemi.com + Current + Voltage VTM IH Symbol Parameter VDRM Peak Repetitive Forward Off State Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Reverse Off State Voltage IRRM Peak Reverse Blocking Current Voltage Current Characteristic of Triacs (Bidirectional Device) IDRM at VDRM on state off state IRRM at VRRM Quadrant 1 MainTerminal 2 + Quadrant 3 MainTerminal 2 –VTM IH VTM Maximum On State Voltage IH Holding Current MT1 (+) IGT GATE (+) MT2 REF MT1 (–) IGT GATE (+) MT2 REF MT1 (+) IGT GATE (–) MT2 REF MT1 (–) IGT GATE (–) MT2 REF MT2 NEGATIVE (Negative Half Cycle) MT2 POSITIVE (Positive Half Cycle) Quadrant III Quadrant IV Quadrant II Quadrant I Quadrant Definitions for a Triac IGT – + IGT All polarities are referenced to MT1. With in–phase signals (using standard AC lines) quadrants I and III are used.

MAC4M, MAC4N http://onsemi.com PACKAGE DIMENSIONS STYLE 4: PIN 1. MAIN TERMINAL 1 2. MAIN TERMINAL 2 3. GATE 4. MAIN TERMINAL 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 Q H Z L V G N A K 12 3 D SEATING PLANE–T– C ST U R J TO–220AB CASE 221A–09 ISSUE Z

MAC4M, MAC4N http://onsemi.com Notes

MAC4M, MAC4N http://onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone : 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–asia@hibbertco.com JAPAN : ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549 Phone : 81–3–5740–2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. MAC4M/D NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone : (+1) 303–308–7140 (M–F 1:00pm to 5:00pm Munich Time) Email: ONlit–german@hibbertco.com French Phone : (+1) 303–308–7141 (M–F 1:00pm to 5:00pm Toulouse Time) Email: ONlit–french@hibbertco.com English Phone: (+1) 303–308–7142 (M–F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, England, Ireland