MAC3010 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
144 Market Street
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Current Ratings Rating Symbol Unit RMS on-state current (full sine wave, 50 to 60Hz) IT(RMS) 4.0 8.0 15 25 40 40 Amps Peak non-repetitive surge current (1 cycle, 60 Hz, TC = 110°C) ITSM 150 250 300
300 Amps
Circuit fusing considerations (TJ = -40 to +110°C, t = 8.3ms) I2t 3.6 260 370
370 A2s
Peak gate voltage (t ≤ 2.0µs) VGM ±5 ±10 ±10 ±10 ±10 ±10 Volts Peak gate power (t ≤ 2.0µs) PGM 10 20 20 20 20 20 Watts Peak gate current (t ≤ 2.0µs) IGM 11 12 12 12 12 12 Amps Average gate power (TC = 80°C, t = 8.3ms) PG(AV)
0.5 Watts
Operating junction temperature range TJ -40 to +100 -40 to +125 -40 to +100 °C Storage temperature range Tstg -40 to +150 °C Peak repetitive forward voltage MAC3010/MAC3030 MAC3020/MAC3040 V DRM 250 400 250 400 250 400 250 400 250 400 250 400 Volts Note 1: VDRM for all types can be applied on a continuous basis. Blocking voltage shall not be tested with a constant current source such t hat the voltage ratings of the devices are exceeded. THERMAL CHARACTERISTICS Current Ratings Characteristic Symbol Unit Thermal resistance, junction to ambient RӨJA 75 60 60 60 1.0 1.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage unless otherwise noted) Characteristic Symbol Min Typ. Max Unit -4 CURRENT RATING Peak blocking current (2) (Rated VDRM @ TJ = 110°C) IDRM 2.0 mA Peak on-state voltage (either direction) (ITM = 6A peak, pulse width ≤ 2 ms, duty cycle ≤ 2%) VTM
2.0 Volts
Gate trigger current (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) IGT mA Gate trigger voltage (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) L = 10kΩ, TJ = 110°C) MT2(+),G(+); MT2(-),G(-) VGT 0.2 2.0 Volts Holding current D = 12V, ITM = 200mA, gate open) IH 40 mA sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES Characteristic Symbol Min Typ. Max Unit Gate controlled turn on time (ITM = 6A peak, IG = 100mA) tgt 1.5 - µs Critical rate of rise of commutation voltage (ITM = 6A peak, commutating di/dt = 3.1A/ms, gate unenergized, TC = 85°C) dv/dt(c) 5.0 - V/µs Critical rate of rise of off-state voltage (exponential waveform, T C = 110°C) dv/dt - V/µs Note 2: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking voltage such that the voltage applied exceeds the rated blocking voltage. MECHANICAL CHARACTERISTIC Case TO-126 (MAC3010-4) Marking Body painted, alpha-numeric Pin out See below TO-126 Inches Millimeters Min Max Min Max A 0.425 0.435 10.80 11.050 B 0.295 0.305 7.490 7.750 C 0.095 0.105 2.410 2.670 D 0.020 0.026 0.510 0.660 F 0.115 0.125 2.920 3.180 G 0.091 0.097 2.310 2.460 H 0.050 0.095 1.270 2.410 J 0.015 0.025 0.380 0.640 K 0.595 0.655 15.110 16.640 M 3° TYP 3° TYP Q 0.148 0.158 3.760 4.010 R 0.045 0.055 1.140 1.400 S 0.025 0.035 0.640 0.890 U 0.145 0.155 3.680 3.940 V 0.040 - 1.020 - sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage unless otherwise noted) Characteristic Symbol Min Typ. Max Unit -8, -15, -25 CURRENT RATING Peak blocking current (2) (@ TJ = 125°C) IDRM 2.0 mA Peak on-state voltage (ITM = √2 IT(RMS) A peak, pulse width ≤ 2 ms, duty cycle ≤ 2%) MAC3030-8 MAC3030-15 MAC3030-25 V TM 1.6 1.6 1.85 Volts Gate trigger current (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) IGT mA Gate trigger voltage (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) (RL = 10kΩ, TJ = 125°C) MT2(+),G(+); MT2(-),G(-) VGT 0.2 2.0 Volts Holding current D = 12V, ITM = 200mA, gate open) IH 40 mA Gate controlled turn on time (ITM = √2 IT(RMS) A peak, IG = 100mA) tgt 1.5 - µs Critical rate of rise of commutation voltage TM = √2 IT(RMS) A peak, commutating di/dt = 0.52 IT(RMS) A/ms, gate unenergized, TC = 80°C) dv/dt(c) 5.0 - V/µs Critical rate of rise of off-state voltage (exponential waveform, TC = 125°C) dv/dt - V/µs Note 2: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking voltage such that the voltage applied exceeds the rated blocking voltage sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES MECHANICAL CHARACTERISTIC Case TO-220AB (MAC3010-8, -15, -25) Marking Body painted, alpha-numeric Pin out See below TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage unless otherwise noted) Characteristic Symbol Min Typ. Max Unit -40, -401 CURRENT RATING Peak blocking current (2) (@ TJ = 110°C) IDRM 2.0 mA Peak on-state voltage (either direction) (ITM = 56A peak, pulse width ≤ 2 ms, duty cycle ≤ 2%) VTM
1.85 Volts
Gate trigger current (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) IGT mA Gate trigger voltage (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) (RL = 10kΩ, TJ = 110°C) MT2(+),G(+); MT2(-),G(-) VGT 0.2 2.0 Volts Holding current D = 12V, ITM = 200mA, gate open) IH 50 mA Gate controlled turn on time TM = 56A peak, IG = 200mA) tgt 1.5 - µs Critical rate of rise of commutation voltage TM = 56A peak, commutating di/dt = 22 A/ms, gate unenergized, TC = 60°C) dv/dt(c) 5.0 - V/µs Critical rate of rise of off-state voltage (exponential waveform, TC = 110°C) dv/dt - V/µs Note 2: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking voltage such that the voltage applied exceeds the rated blocking voltage MECHANICAL CHARACTERISTIC Case TO-48 (MAC3010-40) Marking Body painted, alpha-numeric Polarity Cathode is stud TO-48 Inches Millimeters Min Max Min Max A 0.604 0.614 15.340 15.600 B 0.551 0.559 14.000 14.200 C 1.050 1.190 2.670 30.230 F 0.135 0.160 3.430 4.060 H - 0.265 - 6.730 J 0.420 0.455 10.670 11.560 K 0.620 0.670 15.750 17.020 L 0.300 0.350 7.620 8.890 Q 0.055 0.085 1.400 2.160 T 0.501 0.505 12.730 12.830 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205
phone +1.908.245-7200 MAC3010 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC3020 SERIES MAC3030 SERIES MAC3040 SERIES MECHANICAL CHARACTERISTIC Case TO-48 ISO (MAC3010-401) Marking Body painted, alpha-numeric Polarity Cathode is stud TO-48 ISO Inches Millimeters Min Max Min Max A 0.551 0.559 14.000 14.200 B 0.501 0.505 12.730 12.830 C - 1.280 - 32.510 F - 0.160 - 4.060 H - 0.265 - 6.730 J 0.420 0.455 10.670 11.560 K 0.300 0.350 7.620 8.890 L 0.255 0.275 6.480 6.990 Q 0.055 0.085 1.400 2.160 T 0.135 0.150 3.430 3.810 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130205