MAC223 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
144 Market Street
phone +1.908.245-7200 MAC223(A) SERIES SILICON BIDIRECTIONAL THYRISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak repetitive off-state voltage(1) (TJ = -40 to +125°C, ½ sine wave, 50 to 60Hz, gate open) MAC223-3, MAC223A-3 MAC223-4, MAC223A-4 MAC223-5, MAC223A-5 MAC223-6, MAC223A-6 MAC223-7, MAC223A-7 MAC223-8, MAC223A-8 MAC223-9, MAC223A-9 MAC223-10, MAC223A-10 V DRM 100 200 300 400 500 600 700 800 Volts RMS on-state current (Full cycle sine wave, 50 to 60Hz, TC = 80°C) IT(RMS) 25 Amps Peak non-repetitive surge current (1 cycle, 60Hz, TC = 80°C, preceded and followed by rated current) ITSM
250 Amps
Circuit fusing considerations (t = 8.3ms) I2t 260 A2s Peak gate current (t ≤ 2µs) IGM 2.0 Amps Peak gate voltage (t ≤ 2µs) VGM ±10 Volts Peak gate power (t ≤ 2µs) PGM 20 Watts Average gate power (TC = 80°C, t ≤ 8.3ms) PG(AV) 0.5 Watts Operating junction temperature range TJ -40 to +125 °C Storage temperature range Tstg -40 to +150 °C Mounting torque 8 In. lb. Note 1: VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 1.2 °C/W Thermal resistance, junction to ambient RӨJA 60 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak blocking current (2) (VD = Rated VDRM, TJ = 25°C) (VD = Rated VDRM, TJ = 125°C) IDRM µA mA Peak on-state voltage TM = 35A peak, pulse width ≤ 2ms, duty cycle ≤ 2%.) VTM 1.4
1.85 Volts
Gate trigger current (continuous dc) (VD = 12V, RL = 100Ω) MT2(-),G(+) “A” suffix only IGT mA Gate trigger voltage (continuous dc) (VD = 12V, RL = 100Ω) MT2(-),G(+) “A” suffix only D = Rated VDRM, RL = 10kΩ, TJ = 125°C) MT2(-),G(+) “A” suffix only V GT 0.2 0.2 1.1 1.3 0.4 0.4 2.0 2.5 Volts sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130131
phone +1.908.245-7200 MAC223(A) SERIES SILICON BIDIRECTIONAL THYRISTORS Characteristic Symbol Min Typ. Max Unit Holding current (VD = 12V, ITM = 200mA, gate open) IH 50 mA Gate controlled turn-on time D = Rated VDRM, ITM = 35A, IG = 200mA) tgt 1.5 - µs Critical rate of rise of off-state voltage D = Rated VDRM, exponential waveform, gate open, TC = 125°C) dv/dt - V/µs Critical rate of rise of commutation voltage (VD = Rated VDRM, ITM = 35A peak, commutating di/dt = 12.6A/ms, gate unenergized, TC = 80°C) dv/dt(c) - V/µs Note 2: Ratings apply for open gate conditions. Devices shall not be tested with a constant current source for blocking voltages such that the voltage applied exceeds the rated blocking voltage. MECHANICAL CHARACTERISTIC Case TO-220AB Marking Alpha-numeric Pin out See below sales@digitroncorp.com TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 fax +1.908.245-0555 www.digitroncorp.com Rev. 20130131
phone +1.908.245-7200 MAC223(A) SERIES SILICON BIDIRECTIONAL THYRISTORS sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130131