MAC210-4FP MOTOROLA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
1Motorola Thyristor Device Data /C0084/C0114/C0105/C0097/C0099/C0115 Silicon Bidirectional Thyristors . . . designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering.
- Blocking Voltage to 800 Volts
- All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
- Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability
- Gate Triggering Guaranteed in Three Modes (MAC210FP Series) or Four Modes (MAC210AFP Series) MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit Repetitive Peak Off-State Voltage(1) (TJ = –40 to +125°C) 1/2 Sine Wave 50 to 60 Hz, Gate Open MAC210-4FP , MAC210A4FP MAC210-6FP , MAC210A6FP MAC210-8FP , MAC210A8FP MAC210-10FP , MAC210A10FP VDRM 200 400 600 800 Volts On-State RMS Current (TC = +70°C) Full Cycle Sine Wave 50 to 60 Hz(2) IT(RMS) 10 Amps Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +70°C) preceded and followed by rated current ITSM 100 Amps Circuit Fusing (t = 8.3 ms) I2t 40 A2s Peak Gate Power (TC = +70°C, Pulse Width = 10 µs) PGM 20 Watts Average Gate Power (TC = +70°C, t = 8.3 ms) PG(AV) 0.35 Watt Peak Gate Current (TC = +70°C, Pulse Width = 10 µs) IGM 2 Amps RMS Isolation Voltage (TA = 25°C, Relative Humidity /C0112 20%) V(ISO) 1500 Volts Operating Junction T emperature TJ –40 to +125 °C Storage Temperature Range Tstg –40 to +125 °C THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 2.2 °C/W Thermal Resistance, Case to Sink R θCS 2.2 (typ) °C/W Thermal Resistance, Junction to Ambient R θJA 60 °C/W 1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. The case temperature reference point for all TC measurements is a point on the center lead of the package as close as possible to the plastic body. Order this document by MAC210FP/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA Motorola, Inc. 1995 /C0077/C0065/C0067/C0050/C0049/C0048/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 /C0077/C0065/C0067/C0050/C0049/C0048/C0065/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 CASE 221C-02 STYLE 3 ISOLATED TRIACs THYRISTORS
10 AMPERES RMS
G MT2
/C0077/C0065/C0067/C0050/C0049/C0048/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 /C0077/C0065/C0067/C0050/C0049/C0048/C0065/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115
2 Motorola Thyristor Device Data
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Peak Blocking Current (Either Direction) (VD = Rated VDRM , Gate Open) TJ = 25°C TJ = +125°C IDRM µA mA Peak On-State Voltage (Either Direction) (ITM = 14 A Peak; Pulse Width = 1 to 2 ms, Duty Cycle /C0112 2%) VTM — 1.2 1.65 Volts Gate Trigger Current (Continuous dc) (Main Terminal Voltage = 12 Vdc, RL = 100 Ohms Minimum Gate Pulse Width = 2 µs) MT2(+), G(+) MT2(+), G(–) MT2(–), G(–) MT2(–), G(+) “A” SUFFIX ONLY IGT mA Gate Trigger Voltage (Continuous dc) (Main Terminal Voltage = 12 Vdc, RL = 100 Ohms Minimum Gate Pulse Width = 2 µs) MT2(+), G(+) MT2(+), G(–) MT2(–), G(–) MT2(–), G(+) “A” SUFFIX ONLY (Main Terminal Voltage = Rated VDRM , RL = 10 kΩ , TJ = +125°C MT2(–), G(+) “A” SUFFIX ONLY VGT 0.2 0.2 0.9 0.9 1.1 1.4 2.5 Volts Holding Current (Either Direction) (Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = 500 mA, TC = +25°C) IH — 6 50 mA Turn-On Time (Rated VDRM , ITM = 14 A, IGT = 120 mA, Rise Time = 0.1 µs, Pulse Width = 2 µs) tgt — 1.5 — µs Critical Rate of Rise of Commutation Voltage (VD = Rated VDRM , ITM = 14 A, Commutating di/dt = 5.0 A/ms, Gate Unenergized, TC = +70°C) dv/dt(c) — 5 — V/µs Critical Rate of Rise of Off-State Voltage (VD = Rated VDRM , Exponential Voltage Rise, Gate Open, TC = +70°C) dv/dt — 100 — V/µs
4 Motorola Thyristor Device Data
Figure 7. Typical Holding CurrentFigure 6. Typical Gate Trigger Current Figure 8. Thermal Response
/C0077/C0065/C0067/C0050/C0049/C0048/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 /C0077/C0065/C0067/C0050/C0049/C0048/C0065/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 5Motorola Thyristor Device Data PACKAGE DIMENSIONS CASE 221C–02 1 2 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. LEAD DIMENSIONS UNCONTROLLED WITHIN DIMENSION Z. STYLE 3: PIN 1. MT 1 2. MT 2 3. GATE–Y– –B– –T– Q P A K H Z G L F D 3 PL MBM0.25 (0.010) Y E N S J R C SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.680 0.700 17.28 17.78 B 0.388 0.408 9.86 10.36 C 0.175 0.195 4.45 4.95 D 0.025 0.040 0.64 1.01 E 0.340 0.355 8.64 9.01 F 0.140 0.150 3.56 3.81 G 0.100 BSC 2.54 BSC H 0.110 0.155 2.80 3.93 J 0.018 0.028 0.46 0.71 K 0.500 0.550 12.70 13.97 L 0.045 0.070 1.15 1.77 P 0.270 0.290 6.86 7.36 Q 0.480 0.500 12.20 12.70 R 0.090 0.120 2.29 3.04 S 0.105 0.115 2.67 2.92 Z 0.070 0.090 1.78 2.28
/C0077/C0065/C0067/C0050/C0049/C0048/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115 /C0077/C0065/C0067/C0050/C0049/C0048/C0065/C0070/C0080 /C0083/C0101/C0114/C0105/C0101/C0115
6 Motorola Thyristor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. MAC210FP/D /C0042/C0077/C0065/C0067/C0050/C0049/C0048/C0070/C0080/C0047/C0068/C0042