MAC10 DIGITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
144 Market Street
phone +1.908.245-7200 MAC10 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC11 SERIES Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit Peak repetitive off-state voltage(1) (TJ = 100°C) MAC10-1,MAC11-1 MAC10-2,MAC11-2 MAC10-3,MAC11-3 MAC10-4,MAC11-4 MAC10-5,MAC11-5 MAC10-6,MAC11-6 MAC10-7,MAC11-7 MAC10-8,MAC11-8 V DRM 100 200 300 400 500 600 Volts RMS on-state current (TC = 75°C) IT(RMS) 10 Amps Peak non-repetitive surge current (1 cycle, 60Hz, TJ = -40 to + 100°C) ITSM
100 Amps
Circuit fusing considerations (TJ = -40 to + 100°C, t = 8.3ms) I2t 40 A2s Peak gate power PGM 10 Watts Average gate power PG(AV) 0.5 Watts Peak gate current IGM 2 Amps Operating junction temperature range TJ -40 to +100 °C Storage temperature range Tstg -40 to +150 °C Mounting torque (6-32 screw)(2) 8 In. lb. Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage. Note 2: Torque rating applies with use of torque washer. Mounting torque in excess of 8 in. lb. does not appreciably lower case to sink thermal resistance. Anode lead and heatsink contact pad are common. * Soldering temperatures shall not exceed 200°C THERMAL CHARACTERISTICS Characteristic Symbol Maximum Unit Thermal resistance, junction to case RӨJC 2.0 °C/W Thermal resistance, junction to ambient RӨJA 50 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ. Max Unit Peak blocking current (either direction) (VD = Rated VDRM, gate open, TJ = 100°C) IDRM 2.0 mA Peak on-state voltage (either direction) (ITM = 14A peak) VTM 1.3
1.8 Volts
Gate trigger current (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) , MAC10, MAC11 MT2(+),G(-); MT2(-), G(+), MAC10 IGT mA Gate trigger voltage (continuous dc) (VD = 12V, RL = 100Ω) MT2(+),G(+); MT2(-),G(-) , MAC10, MAC11 MT2(+),G(-); MT2(-), G(+), MAC10 V GT 0.9 1.0 2.0 2.5 Volts Gate trigger voltage (continuous dc) (VD = Rated VDRM, RL = 100Ω, TJ = 100°C) All modes VGD 0.2 - Volts sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130207
phone +1.908.245-7200 MAC10 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC11 SERIES Characteristic Symbol Min Typ. Max Unit Holding current (either direction) (VD = 12V, ITM = 100mA, gate open) IH 50 mA Gate controlled turn-on time (ITM = 14A, IGT = 100mA) ton 1.5 - µs Blocking voltage application rate at commutation (@ VDRM, TJ = 75°C, gate open) dv/dt 5.0 - V/µs MECHANICAL CHARACTERISTIC Case TO-220AB Marking Alpha-numeric Pin out See below sales@digitroncorp.com TO-220AB Inches Millimeters Min Max Min Max A 0.575 0.620 14.600 15.750 B 0.380 0.405 9.650 10.290 C 0.160 0.190 4.060 4.820 D 0.025 0.035 0.640 0.890 F 0.142 0.147 3.610 3.730 G 0.095 0.105 2.410 2.670 H 0.110 0.155 2.790 3.930 J 0.014 0.022 0.360 0.560 K 0.500 0.562 12.700 14.270 L 0.045 0.055 1.140 1.390 N 0.190 0.210 4.830 5.330 Q 0.100 0.120 2.540 3.040 R 0.080 0.110 2.040 2.790 S 0.045 0.055 1.140 1.390 T 0.235 0.255 5.970 6.480 U - 0.050 - 1.270 V 0.045 - 1.140 - Z - 0.080 - 2.030 fax +1.908.245-0555 www.digitroncorp.com Rev. 20130207
phone +1.908.245-7200 MAC10 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC11 SERIES sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130207
phone +1.908.245-7200 MAC10 SERIES SILICON BIDIRECTIONAL THYRISTORS MAC11 SERIES sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130207