MABACT0074 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Surface Mount
  • 2.66:1 Impedance
  • Excellent amplitude and phase balance
  • 260°C Reflow Compatible
  • RoHS* Compliant
  • RoHS version of MABACT0017
  • Available on Tape and Reel. Reel quantity 2000

Description

M/A-COM’s MABACT0074 is a 4:1 Tx Transformer. This part is characterized in a 2.66:1 impedance en- vironment. This Transformer is provided in a low cost, surface mount package. The windings of the MABACT0074 are welded to the package substrate for improved reliability and reduced lead content. Ideally suited for high volume CATV and Satellite

Ordering Information

MABACT0074TR 2000 piece reel MABA-007970-CT74TB Customer Test Board Note: Reference Application Note M513 for reel size information. Schematic Pin No. Function

1 Output 1: (Secondary dot)

2 Ground, Centre Tap

3 Output 2: (Secondary)

4 Ground (Primary)

5 Input (Primary dot)

  • Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Pin Configuration Case Style: SM-152 PRI SEC

2.66:1 Transmission Line Transformer 50-870MHz MABACT0074 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. V1P RoHS Compliant Electrical Specifications: TA = 25°C, Z0 = 75Ω Parameter Test Conditions Units Min Typ Max Insertion Loss (Below the ref Level) 50 - 150 MHz 150 - 650 MHz 650 - 870 MHz dB dB dB 2.2 1.5 2.0 Amplitude Unbalance (Nominal 0dB) 50 - 250 MHz 250 - 650 MHz 650 - 870 MHz dB dB dB ± 0.1 ± 0.2 ± 0.3 ± 0.2 ± 0.4 ± 0.6 Phase Unbalance (Nominal 180º) 50 - 150 MHz 150 - 450 MHz 450 - 870 MHz º º º ± 2 ± 5 ± 8 ± 5 ± 10 ± 15 Input Return Loss 50 - 870 MHz dB - 10 8 Recommended PCB Configuration Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Max Input Power 1 W Internal Load Dissipation 0.125 W Operating Temperature -40°C to +85°C Storage Temperature -40°C to +100°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.

2.66:1 Transmission Line Transformer 50-870MHz MABACT0074 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macom.com for additional data sheets and product information. V1P RoHS Compliant Insertion Loss 2 (Coupled pin 5 to pin 3) Amplitude Unbalance Phase Balance Typical Performance Curves: TA = 25°C, Z0 = 75Ω Input Return Loss Insertion Loss 1 (Through pin 5 to pin 1) -1.5 -0.5 50 21 4 378 542 706 870 MHz dB -1.5 -0.5 50 21 4 378 542 706 870 MHz dB -0.5 0.5 50 21 4 378 542 706 870 MHz dB 170 175 18 0 18 5 19 0 50 21 4 378 542 706 870 MHz Degrees -1 2 -1 0 50 21 4 378 542 706 870 MHz dB