MABACT0066 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Surface mount
- 4:1 Impedance ratio
- Excellent amplitude and phase balance
- Can be used in both 50Ω and 75Ω systems
- 260°C reflow compatible
- RoHS* compliant, Pb free
- Available on tape and reel.
Description
M/A-Com Technology Solutions MABACT0066 is a 4:1 RF flux coupled step up transformer in a low cost, surface mount package. Ideally suited for broadband CATV Broadband applications. Schematic Pin no. Function
1 Secondary dot (Output 1)
2 Centre tap (Ground)
3 Secondary (Output 2)
4 Primary (Input)
5 Primary dot (Ground)
- Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin configuration Component Dimensions Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010, unless otherwise stated
Transformer, 4:1 transmission line 5 to 1000 MHz Rev. V3 MABACT0066 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω, Pin = 0dBm Parameter Test Conditions Units Min Typ Max Insertion Loss 1 5 - 50 MHz 50 - 879 MHz 879 - 1000 MHz dB dB dB 1.5 1.0 1.5 2.0 1.5 2.0 Amplitude Unbalance (Nominal 0dB) 5 - 1000 MHz dB - ±0.25 ±0.5 Phase Unbalance (Nominal 180º) 5 - 500 MHz 500 - 1000 MHz º º ±12 Recommended Maximum Ratings1,2 Parameter Value Max input power 250mW DC current 120mA Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.
Transformer, 4:1 transmission line 5 to 1000 MHz Rev. V3 MABACT0066 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves: TA = 25°C, Z0 = 50Ω, Pin = 0dBm Insertion Loss 2: through pin 4 to pin 3 Insertion Loss 1: coupled pin 4 to pin 1 Phase Balance Amplitude Balance -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 5 171 337 502 668 834 1000 Frequency (MHz) dB -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 5 171 337 502 668 834 1000 Frequency (MHz) dB -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 5 171 337 502 668 834 1000 Frequency (MHz) dB 170 172 174 176 178 180 182 184 186 188 190 5 171 337 502 668 834 1000 Frequency (MHz) Degrees
Transformer, 4:1 transmission line 5 to 1000 MHz Rev. V3 MABACT0066 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Item Dimension Ao 6.10mm +/- 0.1mm Bo 4.60mm +/- 0.1mm Ko 4.00mm +/- 0.1mm W 12.00mm +/- 0.3mm P1 8.00mm +/- 0.1mm
Ordering information
MABACT0066 2000 piece reel MABA-007968-CT66TB Customer Test Board W DIRECTION OF FEED Ao Bo Ko