MABACT0064 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Surface mount
  • 4:1 Impedance ratio
  • Excellent amplitude and phase balance
  • Can be used in both 50Ω and 75Ω systems
  • RoHS* compliant and lead-free
  • Available on tape and reel.

Description

M/A Com’s MABACT064 is a 4:1 RF flux coupled step up transformer in a low cost, surface mount package. Ideally suited for high volume CATV/ Broadband applications.

Ordering information

MABACT0064 2000 piece reel MABA-007948-CT64TB Customer Test Board Note: Reference Application Note M513 for reel size information. Schematic * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin configuration Case style: SM-138 Pin No. Function

1 Secondary (output 2)

2 Centre Tap (ground)

3 Secondary Dot (output 1)

4 Primary (Ground)

5 Primary Dot (Input)

Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010, Unless otherwise stated

Transformer, 4:1 Flux coupled balun transformer 1 to 650 MHz M/A-COM Products Released, Rev. V2 MABACT0064 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Absolute maximum ratings Parameter Absolute maximum Max input power 250mW DC current 200mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +100°C Recommended PCB Configuration Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Units Min Typ Max Insertion Loss 10 - 200 MHz 1 - 450 MHz 450 - 650 MHz dB dB dB 0.7 1.5 3.0 1.0 2.0 3.5 Amplitude Unbalance (Nominal 0dB) 10 - 200 MHz 1 - 650 MHz dB dB ±0.1 ±0.6 ±0.25 ±1.0 Phase Unbalance (Nominal 180º) 10 - 200 MHz 1 - 500 MHz 500 - 600 MHz º º º ±1.0 ±3.0 ±7.0 ±2.0 ±5.0 ±10.0 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits.

Transformer, 4:1 Flux coupled balun transformer 1 to 650 MHz M/A-COM Products Released, Rev. V2 MABACT0064 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves: TA = 25°C, Z0 = 50Ω Insertion Loss 2 (PRI to SEC, pin 5 to pin 1) Phase Balance Amplitude Unbalance Insertion Loss 1 (PRI to SEC DOT, pin 5 to pin 3)