MABA-007237-ETC410 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Surface mount
  • Wide frequency range
  • 1:4 Impedance Ratio
  • CT on Secondary
  • Lead Free
  • RoHS* Compliant and is 2600C reflow compatible.
  • Available on Tape and Reel, reel quantity 2000

Description

M/A-COM’s MABA-007237-ETC410 is a RoHS compli- ant 1:4 RF flux coupled step-up transformer in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel.

Ordering Information

MABA-007237-ETC410 2000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. SM-22 package 12 3 5 4 Schematic Absolute Maximum Ratings 1,2 Parameter Absolute Maximum DC Power 250 mW DC Current 30 mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Primary 5 Primary Dot 4 4 turns

3 Secondary

1 Secondary

2 Secondary

Pin No. Function

2 Secondary CT

3 Secondary Dot

4 Primary Dot

5 Primary

E-Series RF 1:4 Flux Coupled Step-up Transformer 1 — 350 MHz MABA-007237-ETC410 V2 P RoHS Compliant Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Typical Performance Curves Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 1 - 350 MHz — — — Insertion Loss FL—f U 5 - 100 2 - 300 1 - 350 dB dB dB 1.21 1.0 2.0 3.0 Amplitude Unbalance — 5 - 100 1 - 350 dB dB 0.1 0.5 Phase Unbalance — 5 - 100 1 - 350 Degrees Degrees 1.0 5.0 Phase Unbalance Insertion Loss -1.60 -1.28 -0.96 -0.64 -0.32 0.00 1 71 141 210 280 350 Freq (MHz) dB 170 176 182 188 194 200 1 71 141 210 280 350 Freq (MHz) Degrees -0.04 0.01 0.06 0.11 0.16 0.21 1 71 141 210 280 350 Freq (MHz) dB Amplitude Unbalance