SMA11 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- LOW NOISE: 3.1 dB (TYP.)
- LOW VSWR: 1.3:1 (TYP.)
- FLAT BANDWIDTH: <±0.25 dB (TYP.)
Description
The A11 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are Hermetically sealed, and MIL-STD-883 environmental screening is available. Product Image
Ordering Information
MAAM-008715-0SMA11 Surface Mount MAAM-008715-00CA11 SMA Connectorized ** Absolute Maximum Ratings Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature +125ºC DC Voltage +20 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) +125ºC Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance θjc 45ºC/W Transistor Power Dissipation Pd 0.048 W Junction Temperature Rise Above Case Tjc +2ºC * Over temperature performance limits for part number CA11, guaranteed from 0oC to +50oC only. ** The connectorized version is not RoHs compliant.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Cascadable Amplifier 5 to 1000 MHz Rev. V2 A11 / SMA11 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: TO-8 * ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Typical Performance Curves at +25°C Outline Drawing: TO-8 * Outline Drawing: TO-8 * WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 19 grams (0.67 oz.) max