SMG2 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • AVAILABLE IN SURFACE MOUNT
  • LOW VSWR: < 1.5:1 (TYP.)
  • LOW INSERTION LOSS: 2.3 dB TO 1000 MHz (TYP.)
  • LOW DISTORTION: > 75 dB (TYP.) AT Vcontrol = +15V

Description

The G2 attenuator is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This design uses three pin diodes to provide a non linear attenuation response across a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Product Image

Ordering Information

MAAM-007987-000CG2 SMA Connectorized ** Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Parameter Units Typical Guaranteed 25ºC 0º to 50ºC -54º to +85ºC* Frequency MHz 5-2200 5-2000 5-2000 Maximum Attenuation Available (min) 5-500 MHz 500-1000 MHz 1000-2000 MHz dB dB dB Insertion Loss (Vctrl = +15 V) (max) 5-1000 MHz 1000-2000 MHz dB dB 2.3 2.8 3.0 3.5 3.5 4.0 VSWR (worst case in attenuation range) 5-2000 MHz dB <1.5:1 2.2:1 2.3:1 Flatness Over Frequency (max) (Attenuation = min to 15 dB, 5-2000 MHz) dB ±0.4 ±0.8 ±1.0 Switching Speed (max.) 10% - 90% 0% - 100% µsec µsec 125 140 Bias Voltage Volts +5 +5 +5 Bias Current (max) mA 5 6.5 7 Control Voltage Volts 0 to +15 0 to +15 0 to +15 Control Current (max) mA 4 6 7 *Over temperature performance limits for part number CG2, guaranteed from 0oC to +50oC only. ** The connectorized version is not RoHs compliant.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Voltage-Controlled Attenuator Module 5 to 2000 MHz Rev. V3 G2 / SMG2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves at +25°C

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Voltage-Controlled Attenuator Module 5 to 2000 MHz Rev. V3 G2 / SMG2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: SMA Connectorized * Absolute Maximum Ratings Parameter Absolute Maxi- mum Storage Temperature -62ºC to +125ºC Maximum Case Temperature 125ºC Maximum DC Voltage +18 V Maximum DC Bias Voltage +10 V Maximum Short Term RF Input power (1 minute max.) 200 mW Maximum Peak Power (3 µsec max.) 1 W “S” Series Burn-In Temperature (case) +125ºC Typical Performance Curves at +25°C Outline Drawing: Surface Mount * Outline Drawing: TO-8 * ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 19 grams (0.67 oz.) max