MAAM-007865-0P1RTR

MAAM-007865-0P1R00 MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

• High Gain: 20 dB (TYP.)
• Flat Broadband Gain Response: +/- 1.3 dB (TYP)
• P1dB: +18.0 dBm (TYP.)
• Flexibility for Multi-Band Systems
• On-Chip Active Bias Network
• Lead Free 3 mm PQFN Surface Mount Package
• 260oC Reflow Capability

Applications

• LO Buffer Amplifier
• Driver Stage for Power Amplifiers
• Basestation / Repeater Applications
• Broadband RF Gain Block

Description

M/A-COM’s MAAM-007865-0P1R00 amplifier utilizes GaAs HBT technology with an +18 Volt BVceo process for improved linearity performance, power efficiency, and high reliability, in a low cost 3 mm PQFN surface mount plastic package. The MAAM-007865-0P1R00 incorporates an on-chip active bias network for ease of implementation, and maintains high linearity over temperature. The device operates from a single +5 volt supply and has a +5 volt reference pin for power down control capability. An external dropping resistor can be added to lower the P1dB level by 4 dB. The MAAM-007865-0P1R00 requires a minimal number of external bias components to achieve a flat gain response across the entire 50 to 2000 MHz frequency band. Functional Block Diagram Ordering Information1 Part Number Package MAAM-007865-0P1R00 3 mm 12 lead PQFN MAAM-007865-0P1RA1 Sample Application Kit MAAM-007865-0P1RTR 1000 Piece Tape & Reel Product Image Pin Configuration Pin No. Function Description

1 No Connection No connection

2 RF Input RF Input Signal

3 RF Input RF Input Signal

4 No Connection or GND No Connection. GND preferred 5 No Connection or GND No Connection. GND preferred 6 No Connection or GND No Connection. GND preferred

7 RF Output / VCC RF Output & VCC Supply Input

8 RF Output / VCC RF Output & VCC Supply Input

9 No Connection No Connection

10 VCCB

VCC Supply to Bias Circuit. Connected to VCONT on PCB. Optionally could be connected to VCC instead of VCONT. 11 No Connection Normally not connected or Open. Must not be connected to GND.

12 VCONT

DC Control Input to PA. External resistor required for normal operation @ +5 V. See Application Circuit. Pkg Base GND RF/DC GND and thermal Path to PCB Vias. Sufficient Vias must be provided for thermal considerations. See PCB Layout 1. Reference Application Note M513 for reel size information.

Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 MAAM-007865-0P1R00 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. The MAAM-007865-0P1R00 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAM-007865-0P1R00, follow these steps: 1.) Connect the 50 ohm load 2.) Apply VCC (+5.0 Vdc) 3.) Apply VCONT (+5.0 Vdc) 4.) Set the Input Power Level (Pin) 5.) Turn off in reverse order Absolute Maximum Ratings2 Parameter Absolute Maximum RF Input Power + 3 dBm Supply Voltage VCC + 6 V Control Voltage VCONT + 5.5 V VCC Supply Current 55 mA Operating Temperature -40oC to + 85oC Storage Temperature -65oC to +150oC Device Junction Temperature TJ, max 150oC Parameter Test Conditions Units Min Typ Max Frequency Range MHz 50 2000 Gain dB 20 Gain Flatness dB +/-1.3 Gain Variation Over Temp = - 40 oC to +85oC dB 1.6 Input Return Loss Over Frequency dB -10 Output Return Loss Over Frequency dB -10 Reverse Isolation dB -28 Output P-1dB 50 to 1000 MHz dBm 18.5 1000 to 2000 MHz dBm 17 Output IP3 Pout = - 1dBm / tone, ∆f = 1MHz dBm 29.5 Noise Figure dB 5 Bias Supply VCC V 5 6 Control Voltage VCONT Amp ON V 5 VCONT Amp OFF V 2 Bias Current Quiescent Cu rrent Iccq mA 42 47 Control current Icont mA 9 12 Thermal Resistance θjc oC/W TBD Junction Temperature Rise Above Case Tjc oC TBD Electrical Specifications1: Tc= +25oC, VCONT= 5 V, VCC = 5 V, Z0 = 50 Ω, CW 1. All data is based on the Eval uation Circuit Board (page 5). 2. Caution: Operation beyond Absolute Maximum Ratings can degrade performance or cause permanent damage. Operating the MAAM-007865-0P1R00

Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 MAAM-007865-0P1R00 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Gain vs Frequency 00 . 5 11 . 5 2 Frequency (GHz) Gai n (dB) + 2 5 C + 8 5 C - 40 C Isolation vs Frequency -31 -29 -27 -25 00 . 511 . 52 Frequency (GHz) Isolation (dB) Input Return Loss vs Frequency -25 -20 -15 -10 00 . 511 . 52 Frequency (GHz) Input Return Loss (dB) + 2 5 C + 8 5 C - 40 C Gain (dB) Isolation (dB) Return Loss (dB) Output IP3 vs Frequency 0 0.5 1 1.5 2 Frequency (GHz) Output IP3 (dBm )Output IP3 (dBm) Noise Figure vs Frequency 0 0.5 1 1.5 2 Frequency (GHz) Noise Figure (dB) Output Return Loss vs Frequency -20 -15 -10 00 . 5 11 . 5 2 Frequency (GHz) Output Return Loss (dB) + 2 5 C + 8 5 C - 40 C Return Loss (dB) Noise Figure (dB) Typical Performance Curves at +25°C (VCONT = +5V, 12mA, VCC = +5 V, 41 mA) Output P-1dB vs Frequency 0 0.5 1 1.5 2 Frequency (GHz) + 2 5 C + 8 5 C - 40 C P1dB (dBm)

Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 MAAM-007865-0P1R00 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Evaluation Circuit Board Bill of Material COMPONENT PART NO VALUE SUGGESTED VENDOR C1,C2 X7R0603HTTD103K 0.01uF KOA C3 NPO0402HTTP101J 100pF KOA C4 X7R0603CTTD104K 0.1uF KOA C5 X7R0603HTTD102K 1000pF KOA L1 0603CS-R20XJBU 200nH COILCRAFT R1 RK73B1ETTP101J(0402) 100 OHM KOA R2 RK73Z1ELTP(0402) 000 OHM KOA J1, J2 142-0701-881 RF CONN JOHNSON J3 TSM-105-01-S-DV DC CONN U1 MAAM-007865-0P1R00 3mm PQFN 12L TYCO PCB 1000028554-1 GETEK,28mil TYCO Vcont = + 5 V ( ON) Vcont = < 2 V ( OFF) Icont = 9mA nom. VCC= +5V , nom., 6V, max. Iccq= 40 mA, nom. NC RFO2 RFO1 NC RFIN1 RFIN2 APPLICATION CIRCUIT SCHEMATIC 12 11 10 3mm QFN 12-L PKG VCONT NC VCCB 4 5 6 NC/GND NC/GND NC/GND L=200 nH R=100 Ohm R2 R=0 Ohm RFIN C2 C=0.01 uF C=0.01 uF C=1000 pF Vcont VCC C=0.1 uF C=100 pF RFOUT Application Circuit Schematic

Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 MAAM-007865-0P1R00 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. EVALUATION CIRCUIT BOARD LAYOUT1,2,3 1. GETEK, 2-layer, Total Board Thickness = 32 mil. Microstrip 50 Ohm Line width = 54 mil Board Size: 1.4 x 1.1 inches. 2. Via Geometry shown must be used for the 3 mm PQFN package backside to provide a low-inductance & low thermal resistance path to the PCB backside ground. At least 9 vias are required. Via Diameter = 8 mils finished size with 1.0 mils minimum plating. 3. Evaluation circuit board assemblies use SnPb (tin lead) soldering process to attach all components, and are therefore not RoHS compliant. GND VCONT EVAL PCB1 4/06 MAAM-007865-001 VCC RFOUTRFIN

Broadband Driver Amplifier 50 to 2000 MHz Rev. V2 MAAM-007865-0P1R00 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free 3 mm 12-Lead PQFN Package Outline Dimensions Dimensions are inches / millimeters ZZZZ