MAAM-007805 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 2-Way Splitter, 8.5 dB Gain
  • Single Ended Input and Outputs
  • 75 Ω Impedance
  • 4.0 dB Noise Figure
  • Single +5 Volt Supply
  • Lead-Free 3 mm 12-Lead PQFN Package
  • Halogen-Free “Green” Mold Compound
  • RoHS* Compliant and 260°C Reflow Compatible Description and Applications The MAAM-007805 CATV 2-way active splitter is a GaAs MMIC which exhibits low noise figure and distortion in a lead-free PQFN plastic package. This device employs a low noise, high linearity amplifier and power splitter functionality. The design features 75 Ω input and outputs. The MAAM-007805 is ideally suited for multi-tuner set top boxes, home gateways, and other broadband internet based appliances. The MAAM-007805 is fabricated using M/A-COM Technology Solutions’ pHEMT process to realize low noise and low distortion. The process features full passivation for robust performance and reliability. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Pin Configuration Pin No. Function Pin No. Function

1 No Connection 7 RF Output 2

2 RF Input 8 No Connection

3 No Connection 9 RF Output 1

4 No Connection 10 No Connection

5 No Connection 11 No Connection

6 No Connection 12 No Connection

13 RF and DC Ground 3

  1. The exposed pad centered on the package bottom must be connected to RF and DC ground. Functional Schematic N/C N/C N/C N/C OUT2 OUT1N/C IN N/C N/C N/C N/C Ordering Information 1,2 Part Number Package MAAM-007805-TR1000 1000 piece reel MAAM-007805-TR3000 3000 piece reel MAAM-007805-001SMB Sample Board, 50 - 1100 MHz Tuning 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts.

Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz MAAM-007805 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Parameter Test Conditions Units Min. Typ. Max. Gain In to Out1, In to Out2 dB 7.3 8.5 9.5 Gain Flatness In to Out1, In to Out2 dB — 0.75 1.2 Noise Figure In to Out1, In to Out2 dB — 4.0 4.5 Input Return Loss Input dB — 19 — Output Return Loss Output dB — 18 — Composite Triple Beat, CTB 132 channels, +15 dBmV/channel at the input. dBc — -75 — Composite Second Order, CSO 132 channels, +15 dBmV/channel at the input. dBc — -60 — Crossmodulation, XMOD 132 channels, +15 dBmV/channel at the input. dBc — -60 — Reverse Isolation Out1 to In, Out2 to In dB — 20 — Output to Output Isolation Out1 to Out2 dB — 25 — P1dB 400 MHz dBm — 17 — OIP3 Two tones at 1 MHz spacing, Pin at –10 dBm per tone

400 MHz dBm — 33 —

OIP2 Two tones at 1 MHz spacing, Pin at –10 dBm per tone

400 MHz dBm — 55 —

IDD VDD = + 5 Volts mA — 100 120 Electrical Specifications: F = 50 - 1000 MHz, TA = 25°C, VDD = +5 Volts, Z0 = 75 Ω Parameter Absolute Maximum Max Input Power +8 dBm Vbias +10.0 V Operating Temperature -40°C to +85°C Junction Temperature 7 +150°C Storage Temperature -65°C to +150°C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. 6. These operating conditions will ensure MTTF > 1 x 106 hours. 7. Junction Temperature (T J) = TA + Өjc * (V * I) Typical thermal resistance (Өjc) = 85 °C/W. a) For TC = 25°C, TJ = 68 °C @ 5.0 V, 100 mA b) For TC = 85°C, TJ = 123 °C @ 5.0 V, 90 mA Absolute Maximum Ratings 4,5,6,7

Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz MAAM-007805 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Off-Chip Component Values 8 Component Value Package C1- C7 0.01 µF 0402 L4 - L5 1.0 µH 1210 L1 4.7 nH 0402 L6 18 nH 0402 R1 - R2 560 ohms 0402 R3 - R4 91 ohms 0402 L2 - L3 7.5 nH 0402 8. L4 - L5 supplied from EPCOS, part number B82422A1102K100. Recommended PCB Configuration Schematic PWB Layout PCB Land Pattern

Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz MAAM-007805 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Gain vs. Frequency over Temperature Typical Performance Curves Isolation vs. Frequency over Temperature S22 vs. Frequency over Temperature Noise Figure Gain vs. Frequency over Temperature to 3 GHz -15 -10 0 500 1000 1500 2000 2500 3000 +25°C -40°C +85°C Frequency (MHz) S11 vs. Frequency over Temperature -60 -48 -36 -24 -12 0 220 440 660 880 1100 +25°C -40°C +85°C Frequency (MHz) -60 -48 -36 -24 -12 0 220 440 660 880 1100 +25°C -40°C +85°C Frequency (MHz) -60 -48 -36 -24 -12 0 220 440 660 880 1100 +25°C -40°C +85°C Frequency (MHz) -60 -48 -36 -24 -12 0 220 440 660 880 1100 +25°C -40°C +85°C Frequency (MHz) 0 220 440 660 880 1100 OUT1_+25°C OUT2_+25°C Frequency (MHz) 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 0 220 440 660 880 1100 +25°C -40°C +85°C Frequency (MHz)

Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz MAAM-007805 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level1 requirements. Plating is 100% matte tin over copper. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. An external protection circuit using an anti-parallel diode pair can be used to protect the IC. Please reference application note AN3028 on http://www.macomtech.com for further detail