MAALSS0042 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Low Noise Figure: 1.15 dB
  • High Gain: 27 dB
  • Low Power Consumption: 5V, 20 mA
  • High Dynamic Range
  • Lead-Free SOIC-8 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of AM50-0002

Description

M/A-COM’s MAALSS0042 is a high performance GaAs MMIC low noise amplifier in a lead-free SOIC 8-lead surface mount plastic package. The MAALSS0042 employs a monolithic 3-stage self- bias design and a simple external matching network to obtain minimum noise figure. The MAALSS0042 is ideally suited for use where low noise figure, high gain, high dynamic range and low power consumption are required. Typical applications include receiver front ends in the Global Positioning System (GPS) market, as well as standard gain blocks, buffer amps, driver amps, and IF amps in both fixed and portable systems. M/A-COM’S MAALSS0042 is fabricated using a mature 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. Functional Diagram GND RF IN GND RF OUT GND GND GND GND GND RF IN GND RF OUT GND GND GND GND Ordering Information 1,2 Part Number Package MAALSS0042 Bulk Packaging MAALSS0042TR-3000 3000 piece reel MAALSS0042SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. Die quantity varies. Absolute Maximum Ratings 6,7 Parameter Absolute Maximum VDD +10 VDC Input Power 17 dBm Channel Temperature 8 +150 °C Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 8. Typical thermal resistance ( θjc) = +165 °C/W Pin No. Pin Name Description

1 GND Ground

2 RF IN RF Input

3 GND Ground

4 GND Ground

5 GND Ground

6 RF OUT RF Output, VDD

7 GND Ground

8 GND Ground

Pin Configuration 3,4,5 3. Pins 1, 3, 4, 5, 7, and 8 must be RF and DC grounded (see Recommended PCB Configuration). 4. Pin 2 is the RF input and must be connected to the simple matching network shown in the Application Schematic. 5. Pin 6 is the RF output. V DD is also applied on Pin 6. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Noise Amplifier

1.575 GHz

Rev. V1 MAALSS0042 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = +25°C, VDD = +5 V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain F = 1.575 GHz, PIN = -35 dBm dB 25 27 29 Noise Figure F = 1.575 GHz, PIN = -35 dBm dB - 1.15 1.4 Input VSWR F = 1.575 GHz, PIN = -35 dBm Ratio - 2.0:1 - Output VSWR F = 1.575 GHz, PIN = -35 dBm Ratio - 1.5:1 - Output P1dB F = 1.575 GHz dBm - 1 - Input IP3 F = 1.575 GHz, PIN = -35 dBm dBm - -14 - Reverse Isolation F = 1.575 GHz, PIN = -35 dBm dB - 48 - Bias Current — mA 15 20 25 Frequency = 1.575 GHz Impedance Electrical Length T1 57.2 Ω 36.0° T2 82.7 Ω 16.2° Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Recommended PCB Configuration Dimensions in inches (mm). Application Schematic

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Noise Amplifier

Rev. V1 MAALSS0042 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Gain, TA = +25°C Input IP3, TA = +25°C Noise Figure over Temperature Noise Figure, TA = +25°C VSWR, TA = +25°C Frequency (GHz) Gain over Temperature 0.8 1.0 1.2 1.4 1.6 Frequency (GHz) 0.8 1.0 1.2 1.4 1.6 +25°C -40°C +85°C Frequency (GHz) -16 -15 -14 -13 -12 Frequency (GHz) 1.0 1.5 2.0 2.5 3.0 Input Output Frequency (GHz) +25°C -40°C +85°C Frequency (GHz)