MAAL-007673-000000

MAAL-007673 MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

• Low Noise Figure: 1.65 dB
• High Gain: 20 dB
• Low Power Consumption: 3 to 5 V, 8 mA
• High Dynamic Range
• DC Decoupled RF Input and Output
• No External RF Tuning Elements Necessary
• Lead-Free Low Cost SOIC-8 Plastic Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of MAAM12031

Description

M/A-COM’s MAAL-007673 is a high performance GaAs MMIC low noise amplifier in a lead-free SOIC 8-lead surface mount package. The MAAL-007673 employs a fully monolithic design which eliminates the need for external tuning networks. It can be biased using 3 or 5 volt supplies and has an option for biasing at higher currents for increased dynamic range. The MAAL-007673 is ideally suited for use where low noise figure, high gain, high dynamic range and low power consumption are required. Typical applications include receiver front ends in the Japanese Personal Handy Phone Service (PHS), Private Branch Exchange (PBX) and Personal Communications and Networks (PCS, PCN) markets, as well as standard gain blocks, buffer amps, driver amps and IF amps in both fixed and portable systems. M/A-COM’s MAAL-007673 is fabricated using a mature 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. Ordering Information1 Part Number Package MAAL-007673-000000 Bulk Packaging MAAL-007673-TR1000 1000 piece reel MAAL-007673-TR3000 3000 piece reel 1. Reference Application Note M513 for reel size information. Functional Schematic Pin Configuration Pin No. Function Pin No. Function

1 Ground 5 Ground

2 R1 (Optional) 6 RF Output

3 RF Input 7 VDD

4 Ground 8 Ground

• Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 8 7 6 5 1 2 3 4 RF OUT GNDGND RF IN GNDGND V DD (optional) Absolute Maximum Ratings 2,3 Parameter Absolute Maximum VDD +10 VDC Input Power +17 dBm Current 4 30 mA Channel Temperature 5 +150°C Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Only if pin 2 is used to increase current (see note 9). 5. Typical thermal resistance ( θjc) = +165°C/W.

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Noise Amplifier 1.7 - 2.0 GHz Rev. V2 MAAL-007673 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications6: TA = 25°C, VDD = +5 V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 1.7 - 2.0 GHz, PIN = -30 dBm dB 18 20 22 Noise Figure 1.7 - 2.0 GHz dB — 1.65 2.00 Input VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 — Output VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 — Output 1 dB Compression 1.7 - 2.0 GHz dBm — 7 — Input IP3 1.7 - 2.0 GHz, PIN = -30 dBm dBm — -1 — Reverse Isolation 1.7 - 2.0 GHz, PIN = -30 dBm dB — 38 — Bias Current — mA 5 8 11 6. See plots for 3-volt performance. Component List Part Value Case Size Manufacturer C1 500 pF 0603 Murata L1 15 nH 0805 Coilcraft R1 (Optional) 35 to 40 Ω 0603 Panasonic 7. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown. 8. Pin 3 is the RF input, pin 6 is the RF output. V DD is applied on pin 7. This pin must be bypassed with a 500 pF surface mount MLC capacitor, mounted as close as possible to pin 7, and RF decoupled with a chip inductor having a minimum value of 15 nH (as shown in the Recommended PCB Configuration). 9. Pin 2 allows use of an external resistor to ground for optional, higher current bias. For nominal current operation no resistor is used. For optional 20 mA current operation, connect a 35 to 40 ohm chip resistor (as show in the Recommended PCB Configuration). Recommended PCB Configuration Application Schematic 7,8,9 VDD RF IN RF OUT (Optional) See Note 9

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Noise Amplifier 1.7 - 2.0 GHz Rev. V2 MAAL-007673 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Noise Figure @ +25°C VSWR @ 5 V, 8 mA, +25°C Input IP3 @ +25°C Typical Performance Curves Gain @ 5 V, 8 mA Noise Figure @ 5 V, 8 mA Gain @ +25°C

3 VOLTS, 8mA

5 VOLTS, 8mA

5 VOLTS, 20mA

Frequency (GHz) +25 C -40 C +85 C Frequency (GHz) 1.5 1.6 1.7 1.8 1.9 1.7 1.8 1.9 2.0 Frequency (GHz) 1.7 1.8 1.9 2.0 Frequency (GHz) 1.2 1.5 1.8 2.1 2.4 +25 C -40 C +85 C Frequency (GHz) 1.0 1.5 2.0 2.5 3.0 INPUT OUTPUT Frequency (GHz)

• North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Low Noise Amplifier 1.7 - 2.0 GHz Rev. V2 MAAL-007673 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Lead-Free SOIC-8† † Reference Application Note M538 for lead-free solder reflow recommendations. Additional information is available in Application Note M540, “M/A-COM GaAs MMIC LNA SOIC-8 Platform”.