MAAD-007086-000100 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Attenuation: 1 dB Steps to 50 dB
  • Low DC Power Consumption
  • Integral TTL Driver
  • 50 ohm Impedance
  • Test Boards are Available
  • Tape and Reel Packaging Available
  • Lead-Free SOW-24 Package
  • 100% Matte Tin Plating over Copper
  • Halogen-Free “Green” Mold Compound
  • 260°C Reflow Compatible
  • RoHS* Compliant Version of AT65-0106

Description

M/A-COM's MAAD-007086-000100 is a GaAs FET 6-bit digital attenuator with a 1 dB minimum step size and a 50 dB total attenuation range. This device is in a SOW-24, wide body plastic surface mount package. The MAAD-007086-000100 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required.

Ordering Information

MAAD-007086-000100 Bulk Packaging MAAD-007086-0001TR 1000 piece reel MAAD-007086-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. Schematic with Off-Chip Components Pin Configuration Pin No. Function Pin No. Function

1 GND 13 RF

2 GND 14 GND

3 GND 15 GND

4 C32 16 GND

5 C16 17 GND

6 VEE 18 GND

7 VCC 19 GND

8 C8 20 GND

9 C4 21 GND

10 C2 22 GND

11 C1 23 GND

12 GND 24 RF

  • Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

50 dB, 6-Bit, TTL Driver, DC-2.0 GHz Rev. V3 MAAD-007086-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss — DC - 2.0 GHz dB — 4.2 4.7 Attenuation Accuracy Individual Bits 1-2-4-8-16-32 dB Any Combination of Bits 3 to 15 dB Any Combination of Bits 17 to 31 dB Any Combination of Bits 32 to 50 dB DC - 2.0 GHz DC - 2.0 GHz DC - 2.0 GHz DC - 2.0 GHz dB dB dB dB ±(.3 +3% of atten setting) ±(.5 +5% of atten setting) ±(.3 +3% of atten setting) ±(.5 +7% of atten setting) VSWR Full Range DC - 2.0 GHz Ratio — 1.8:1 2:1 Switching Speed1 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% ns ns 150 1 dB Compression —

50 MHz

0.5 - 2.0 GHz dBm dBm +21 +24 Input IP3 Two-tone inputs up to +5 dBm @ 0 dB Attenuation 0.5-2.0 GHz dB dB +35 +48 Vcc Vee V V 4.75 -8.0 5.0 -5.0 5.25 -4.75 VIL VIH LOW-level input voltage HIGH-level input voltage V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND — uA -1.0 — 1.0 Thermal Resistance θJA PCB mount on FR4 material, copper trace, still air at +25°C — °C/W — 60-80 — Icc (Quiescent Supply Current) Vcntrl = VCC or GND — uA — 250 400 ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 IEE VEE min to max, Vin = VIL or VIH — mA -1.0 -0.2 — 1. Decoupling capacitors (.01µF) ar e required on power supply lines. Absolute Maximum Ratings2,3 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 2.0 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +7.0V VEE -8.5V ≤ VEE ≤ +0.5V VCC - VEE -0.5V ≤ VCC - VEE ≤ 14.5V Vin4 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Standard CMOS TTL interface, latch-up will occur if logic sig- nal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electric ity. Proper ESD control techniques should be used when handling these devices.

50 dB, 6-Bit, TTL Driver, DC-2.0 GHz Rev. V3 MAAD-007086-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Truth Table (Digital Attenuator) C32 C16 C8 C4 C2 C1 Attenuation 0 0 0 0 0 0 Loss, Reference 0 0 0 0 0 1 1 dB 0 0 0 0 1 0 2 dB 0 0 0 1 0 0 4 dB 0 0 1 0 0 0 8 dB 0 1 0 0 0 0 16 dB 1 0 0 0 0 0 32 dB 1 1 0 0 1 0 50 dB 0 = TTL Low; 1 = TTL High 1 dB Attenuation Variation from -40ºC to +85ºC 2 dB Attenuation Variation from -40ºC to +85ºC 4 dB Attenuation Variation from -40ºC to +85ºC Typical Performance Curves Insertion Loss vs. Temperature Loss Variation Over Temperature Frequency (GHz) Attenuation (dB) +25°C +85°C -40°C 1 dB Variation Over Temperature 1.0 1.2 1.4 Frequency (GHz) Attenuation (dB) 2 dB Attenuation Variation Over Temperature 1.6 1.8 2.0 2.2 Frequency (GHz) Attenuation (dB) 4 dB Attenuation Variation Over Temperature 3.6 3.8 4.0 4.2 4.4 Frequency (GHz) Attenuation (dB)

50 dB, 6-Bit, TTL Driver, DC-2.0 GHz Rev. V3 MAAD-007086-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. 16 dB Attenuation Variation from -40ºC to +85ºC 32 dB Attenuation Variation from -40ºC to +85ºC Max. Attenuation Variation from -40ºC to +85ºC Typical Performance Curves Reference Loss VSWR (S11, S22) 1 dB VSWR (S11, S22) 8 dB Attenuation Variation from -40ºC to +85ºC 8 dB Attenuation Variation Over Temperature 7.8 8.2 8.6 Frequency (GHz) Attenuation (dB) 16 dB Attenuation Variation Over Temperature 15 .5 16 .0 16 .5 Frequency (GHz) Attenuation (dB) 32 dB Attenuation Variation Over Temperature 30.0 31.0 32.0 33.0 Frequency (GHz) Attenuation (dB) Max. Attenuation Variation Over Temperature Frequency (GHz) Attenuation (dB) Loss VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 1 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11

50 dB, 6-Bit, TTL Driver, DC-2.0 GHz Rev. V3 MAAD-007086-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. 4 dB VSWR (S11, S22) 8 dB VSWR (S11, S22) 16 dB VSWR (S11, S22) Typical Performance Curves 32 dB VSWR (S11, S22) 50 dB VSWR (S11, S22) 2 dB VSWR (S11, S22) 2 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 4 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 8 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 16 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 32 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 50 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11

50 dB, 6-Bit, TTL Driver, DC-2.0 GHz Rev. V3 MAAD-007086-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Lead-Free, SOW-24† † Reference Application Note M538 for lead-free solder reflow recommendations.