MAAD-007086-000100

MAAD-007086 MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

 Attenuation: 1 dB Steps to 50 dB  Low DC Power Consumption  Integral TTL Driver  50 ohm Impedance  Test Boards are Available  Tape and Reel Packaging Available  Lead-Free SOW-24 Package  100% Matte Tin Plating over Copper  Halogen-Free “Green” Mold Compound  260°C Reflow Compatible  RoHS* Compliant Version of AT65-0106

Description

MACOM's MAAD -007086-000100 is a GaAs FET 6-bit digital attenuator with a 1 dB minimum step size and a 50 dB total attenuation range. This device is in a SOW -24, wide body plastic surface mount package. The MAAD -007086-000100 is ideally suited for use where accuracy, fast speed, very low power consumption and low costs are required.

Ordering Information

MAAD-007086-000100 Bulk Packaging MAAD-007086-0001TR 1000 piece reel MAAD-007086-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. Schematic with Off-Chip Components Pin Configuration Pin No. Function Pin No. Function

1 GND 13 RF

2 GND 14 GND

3 GND 15 GND

4 C32 16 GND

5 C16 17 GND

6 VEE 18 GND

7 VCC 19 GND

8 C8 20 GND

9 C4 21 GND

10 C2 22 GND

11 C1 23 GND

12 GND 24 RF

• Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 2 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Electrical Specifications: TA = 25°C, Z0 = 50 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss — DC - 2.0 GHz dB — 4.2 4.7 Attenuation Accuracy Individual Bits 1-2-4-8-16-32 dB Any Combination of Bits 3 to 15 dB Any Combination of Bits 17 to 31 dB Any Combination of Bits 32 to 50 dB DC - 2.0 GHz DC - 2.0 GHz DC - 2.0 GHz DC - 2.0 GHz dB dB dB dB ±(.3 +3% of atten setting) ±(.5 +5% of atten setting) ±(.3 +3% of atten setting) ±(.5 +7% of atten setting) VSWR Full Range DC - 2.0 GHz Ratio — 1.8:1 2:1 Switching Speed1 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% ns ns 150 1 dB Compression —

50 MHz

0.5 - 2.0 GHz dBm dBm +21 +24 Input IP3 Two-tone inputs up to +5 dBm @ 0 dB Attenuation 0.5-2.0 GHz dB dB +35 +48 Vcc Vee V V 4.75 -8.0 5.0 -5.0 5.25 -4.75 VIL VIH LOW-level input voltage HIGH-level input voltage V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) Vin = VCC or GND — uA -1.0 — 1.0 Icc (Quiescent Supply Current) Vcntrl = VCC or GND — uA — 250 400 ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 IEE VEE min to max, Vin = VIL or VIH — mA -1.0 -0.2 — Thermal Resistance θJA PCB mount on FR4 material, copper trace, still air at +25°C — °C/W — 60-80 — 1. Decoupling capacitors (.01µF) are required on power supply lines. Absolute Maximum Ratings2,3 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 2.0 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +7.0V VEE -8.5V ≤ VEE ≤ +0.5V VCC - VEE -0.5V ≤ VCC - VEE ≤ 14.5V Vin4 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. MACOM does not recommend sustained operation near these survivability limits. 4. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 3 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Truth Table (Digital Attenuator) C32 C16 C8 C4 C2 C1 Attenuation 0 0 0 0 0 0 Loss, Reference 0 0 0 0 0 1 1 dB 0 0 0 0 1 0 2 dB 0 0 0 1 0 0 4 dB 0 0 1 0 0 0 8 dB 0 1 0 0 0 0 16 dB 1 0 0 0 0 0 32 dB 1 1 0 0 1 0 50 dB 0 = TTL Low; 1 = TTL High 1 dB Attenuation Variation from -40ºC to +85ºC 2 dB Attenuation Variation from -40ºC to +85ºC 4 dB Attenuation Variation from -40ºC to +85ºC Typical Performance Curves Insertion Loss vs. Temperature Loss Variation Over Temperature Frequency (GHz) Attenuation (dB) +25°C +85°C -40°C 1 dB Variation Over Temperature 1.0 1.2 1.4 Frequency (GHz) Attenuation (dB) 2 dB Attenuation Variation Over Temperature 1.6 1.8 2.0 2.2 Frequency (GHz) Attenuation (dB) 4 dB Attenuation Variation Over Temperature 3.6 3.8 4.0 4.2 4.4 Frequency (GHz) Attenuation (dB)

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 4 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 16 dB Attenuation Variation from -40ºC to +85ºC 32 dB Attenuation Variation from -40ºC to +85ºC Max. Attenuation Variation from -40ºC to +85ºC Typical Performance Curves Reference Loss VSWR (S11, S22) 1 dB VSWR (S11, S22) 8 dB Attenuation Variation from -40ºC to +85ºC 8 dB Attenuation Variation Over Temperature 7.8 8.2 8.6 Frequency (GHz) Attenuation (dB) 16 dB Attenuation Variation Over Temperature 15 . 5 16 . 0 16 . 5 Frequency (GHz) Attenuation (dB) 32 dB Attenuation Variation Over Temperature 30.0 31.0 32.0 33.0 Frequency (GHz) Attenuation (dB) Max. Attenuation Variation Over Temperature Frequency (GHz) Attenuation (dB) Loss VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 1 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 5 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support 4 dB VSWR (S11, S22) 8 dB VSWR (S11, S22) 16 dB VSWR (S11, S22) Typical Performance Curves 32 dB VSWR (S11, S22) 50 dB VSWR (S11, S22) 2 dB VSWR (S11, S22) 2 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 4 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 8 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 16 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 32 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11 50 dB VSWR (S11,S22) 1.0 1.2 1.4 1.6 1.8 2.0 Frequency (GHz) VSWR S22S11

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 6 6 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support Lead-Free, SOW-24† † Reference Application Note M538 for lead-free solder reflow recommendations.

50 dB, 6-Bit, TTL Driver, DC - 2.0 GHz Rev. V4 MAAD-007086 7 7 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A -COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale.