MAAD-007079-0001TB

MAAD-007079-000100 MA-COM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• Attenuation: 2 dB Steps to 30 dB
• Single Positive Supply
• Contains Internal DC to DC Converter
• Integral TTL Driver
• 50 Ohm Impedance
• Test Boards Available
• Tape and Reel Packaging Available
• Lead-Free CSP-1 Package
• 100% Matte Tin Plating over Copper
• Halogen-Free “Green” Mold Compound
• 260°C Reflow Compatible
• RoHS* Compliant Version of AT90-1233

Description

M/A-COM’s MAAD-007079-000100 is a GaAs FET 4-Bit digital attenuator with integral driver. Step size is 2 dB providing a 30 dB attenuation range. This device is in an FQFP-N plastic surface mount pack- age. The MAAD-007079-000100 is suited for single supply applications where accuracy, fast speed, low power consumption and low co sts are required. For dual supply designs without switching noise, use MAATCC0012. Functional Schematic Pin Configuration3 Pin No. Function Pin No. Function

1 GND 17 NC

2 C16 18 NC

3 C8 19 VCC

4 C4 20 NC

5 C2 21 Cp

6 GND 22 NC

7 GND 23 Cp

8 NC 24 NC

9 NC 25 VEE2

10 NC1 26 GND

11 GND 27 RF2

12 RF1 28 GND

13 GND 29 NC1

14 NC 30 VEE2

15 NC 31 NC

16 NC 32 VCC

• Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1. Pins 10 and 29 must be isolated. 2. V EE is produced internally and requires a .1 µF cap to GND. Generated noise is typical of switching DC-DC Converters. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages)

Ordering Information

MAAD-007079-000100 Bulk Packaging MAAD-007079-0001TR 1000 piece reel MAAD-007079-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information.

30.0 dB, 4-Bit, TTL Driver, DC-2.5 GHz Rev. V4 MAAD-007079-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Frequency Units Min Typ Max Insertion Loss DC - 2.5 GHz dB — 2.7 3.0 Attenuation Accuracy DC - 2.5 GHz dB — — ±(.3 +5% of atten setting) VSWR DC - 2.5 GHz Ratio — 1.5:1 1.8:1 Switching Speed — nS nS 150 1 dB Compression 50 MHz 0.5 - 2.5 GHz dBm dBm +21 +29 Input IP3 50 MHz 0.5 - 2.5 GHz dB dB +35 +48 Vcc — V 4.75 5.0 5.25 VIL VIH V V 0.0 2.0 0.8 5.0 lin (Input Leakage Current) — uA -1.0 — 1.0 Test Conditions Individual Bits or Combination of Bits Full Range 50% Cntl to 90%/10% RF 10% to 90% or 90% to 10% Two-tone inputs up to +5 dBm LOW-level input voltage HIGH-level input voltage Vin = VCC or GND Icc4 Vcc min to max, Logic “0” or “1” — mA — 6 10 Turn-on Current5 For guaranteed start-up — mA — — 125 Switching Noise Generated from DC-DC Converter with recommended capacitors

3.5 MHz dBm — -93 —

Thermal Resistance θjc — — °C/W — 15 — ΔIcc (Additional Supply Current Per TTL Input Pin) VCC = Max, Vcntrl = VCC - 2.1 V — mA — — 1.0 4. During turn-on, the device requires an initial start up current (Icc) specified as “Turn-on Current”. Once operational, Icc will drop to the specified levels. 5. The DC-DC converter is guaranteed to start in 100 µs as long as the power supplies have the maximum turn-on current available for start-up. Absolute Maximum Ratings 6,7 Parameter Absolute Maximum Max. Input Power

0.05 GHz

0.5 - 2.5 GHz +27 dBm +34 dBm VCC -0.5V ≤ VCC ≤ +6.0V Vin8 -0.5V ≤ Vin ≤ VCC + 0.5V Operating Temperature -40ºC to +85ºC Storage Temperature -65ºC to +125ºC 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 8. Standard CMOS TTL interface, latch-up will occur if logic sig- nal is applied prior to power supply. Recommended PCB Configuration9 9. Application Note C2083 is available on line at www.macom.com

30.0 dB, 4-Bit, TTL Driver, DC-2.5 GHz Rev. V4 MAAD-007079-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electric ity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. Truth Table (Digital Attenuator) C16 C6 C4 C2 Attenuation 0 0 0 0 Loss, Reference 0 0 0 1 2.0 dB 0 0 1 0 4.0 dB 0 1 0 0 8.0 dB 1 0 0 0 16.0 dB 1 1 1 1 30.0 dB 0 = TTL Low; 1 = TTL High VSWR @ Insertion Loss Attenuation Error, 2 dB Bit Attenuation Error, 4 dB Bit Typical Performance Curves Insertion Loss 1. 0 0 1. 5 0 2.00 2.50 3.00 0 500 1 000 1 500 2000 2500 F requency (M Hz) Attenuation (dB) 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) VSWR InputOutput -0.30 -0.20 -0.1 0 0.00 0.1 0 0.20 0.30 0 5 00 1 000 1 500 2000 25 00 Fre qu e n cy (MHz ) Attenuation (dB) -0.40 -0.20 0.00 0.20 0.40 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) Attenuation (dB)

30.0 dB, 4-Bit, TTL Driver, DC-2.5 GHz Rev. V4 MAAD-007079-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Attenuation Error, 16 dB Bit Attenuation Error, Max. Attenuation VSWR, 2 dB Bit Typical Performance Curves VSWR, 4 dB Bit VSWR, 8 dB Bit Attenuation Error, 8 dB Bit -0.40 -0.20 0.00 0.20 0.40 0 500 1 000 1 500 2000 2500 F requency (M Hz) Attenuation (dB) -0.80 -0.60 -0.40 -0.20 0.00 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) Attenuation (dB) -1 .50 -1 .00 -0.50 0.00 0.50 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) Attenuation (dB) 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 F requency (MHz) VSWR Output Input 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) VSWR Output Input 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 F requency (MHz) VSWR Output Input

30.0 dB, 4-Bit, TTL Driver, DC-2.5 GHz Rev. V4 MAAD-007079-000100 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. VSWR, Maximum Attenuation Typical Performance Curves VSWR, 16 dB Bit 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 Fre qu e n cy (MHz ) VSWR Output Input 1. 0 0 1. 2 0 1. 4 0 1. 6 0 0 500 1 000 1 500 2000 2500 F requency (M Hz) VSWR Output Input CSP-1, Lead-Free 4 x 6 mm, 32-lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations.