MA530ACG003 TAOGLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
SPE-14-8-031/A/WY | page 1 of 16 MA.530.A.C101151.G101151 MA530.A.CG.003 Specification Part No. MA530.A.CG.003 Product Name Taoglas “Ultima” Antenna Heavy Duty Screw Mount Antenna 2 x MIMO Dual-Band 2.4/5.0GHz Feature 2.4GHz/5.0GHz suitable for ISM Bands/ZigBee/WLAN/Bluetooth IEEE.802.11n/IEEE.802.11ac High Isolation between Antenna Elements PC housing Waterproof IP67 & IP69K Rated Height 19.6mm Diameter 55.23mm RoHS Compliant Ultima
SPE-14-8-031/A/WY | page 2 of 16 MA.530.A.C101151.G101151 The MIMO communication system has been one of the most promising technologies, well suited for high data rate communication. A MIMO (Multiple-Input-Multiple-Output) system use at least two antenna structures and is more advantageous than single-input single-output (SISO) in an aspect of increasing channel capacity and reducing transmitting power. MIMO antennas should have compact structure, high radiation efficiency, low envelope correlation, and high isolation between the signal ports. In small structures (antennas spaced closely), the application of MIMO technology has been restricted by high degree of coupling and spatial correlation between antenna elements due to the limited available space. The isolation between antennas become critical as it can deteriorate the system performance and decreases channel capacity. The Ultima MA530 MIMO antenna is low profile, heavy-duty, fully IP67 waterproof external M2M antenna for use, transportation and remote monitoring applications. This unique omnidirectional antenna provide high efficiency and high isolation between antennas elements in a heavy-duty low profile compact structure, delivering powerful MIMO antenna technology for Wi-Fi 802.11n and emerging 802.11ac. The antenna screws down permanently onto a roof or metal panel and can be pole or wall-mounted. One antenna elements is vertically polarized and one is horizontally polarized to increase the isolation between antennas. 1. Introduction
SPE-14-8-031/A/WY | page 3 of 16 MA.530.A.C101151.G101151 2. Specification MIMO 1 Operation Frequency (GHz) Polarization Impedance (ohms) Max Isolation (dB) to other port Max VSWR Max Return Loss (dB) Peak Gain (dBi) Efficiency (%) Average Gain (dB) Radiation Properties Max Input Power MIMO 2 ULtIMA MA530 MIMO Operation Frequency (GHz) Polarization Impedance (ohms) Max Isolation (dB) to other port Max VSWR Max Return Loss (dB) Peak Gain (dBi) Efficiency (%) Average Gain (dB) Max Input Power 5.15~5.85 -20 3.0:1 2.3 26.8 -5.7 Linear 5W max Linear 5W max 5.15~5.85 -20 3.0:1 1.6 26.5 -5.8 Omni 2.4~2.5 -11 3.0:1 3.5 39.6 -4.0 Omni 2.4~2.5 -11 3.0:1 5.5 45.1 -3.4 MECHANICAL Dimensions (mm) Cable Casing Base and thread Weather proof gasket Connector thread Diameter (mm) Sealant Weight Height=19.6 Diameter=55.23 1M RG-174,Fully Customizable PC Plastic CR4305 foam with 3M9448B double-side adhesive RP-SMA Male, Fully Customizable M24 Rubber Stopper 0.06Kg ENVIRONMENtAL Protection temperature Range thermal Shock Humidity Shock (Drop test) IP67 & IP69K rated 40ºC to +85ºC 100 cycles -40 C to +885 C Non-condensing 65 C 95% RH 1m drop on concrete 6 axes *The Ultima MA.530 MIMO antenna performance was measured with RG174 coaxial cable at 1 meter cable length.
Figure 1. Peak gain, efficiency and radiation pattern measurements.
3.3 Insertion Loss of two Ports
Figure 2. Return loss of the Ultima MA530 MIMO antenna.
3.2 Return Loss
Figure 3. Insertion Loss of the Ultima MA530 MIMO antenna
3.5 Peak Gain
Figure 4. Efficiency of the Ultima MA530 MIMO antenna
3.4 Efficiency
Figure 5. Peak Gain of the Ultima MA530 MIMO antenna.
Figure 6. Average Gain of the Ultima MA530 MIMO antenna
3.6 Average Gain
3.7.1 MIMO Antenna 1
Figure 7. 2D Radiation Pattern of the MA530 MIMO1 Antenna
3.7.2 MIMO Antenna 2
Figure 8. 2D Radiation Pattern of the MA530 MIMO2 Antenna
SPE-14-8-031/A/WY | page 14 of 16 MA.530.A.C101151.G101151 4. Antenna Drawing
SPE-14-8-031/A/WY | page 15 of 16 MA.530.A.C101151.G101151 Recommended torque for mounting is 3.2 N·m or 40 Kgf.cm Maximum torque for mounting 4.9 N·m or 50 Kgf.cm 5. Installation
SPE-14-8-031/A/WY | page 16 of 16 MA.530.A.C101151.G101151 1pc MA.530 per PE Bag Bag Dimensions - 300*170mm Weight - 0.06Kg Pallet Dimensions 1100*1100mm
36 Cartons per Pallet
9 Cartons per layer, 4 Layers
3600 Pieces per Pallet
Carton Dimensions - 310*380*320mm Weight - 7.2Kg 6. Packaging