MA40030 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
= FE ‘an AMP company Stripline Packaged . . Schottky Mixer Diodes v2.00 Features Case Style 213 © Large Choice of Available Packages © Uniform RF Characteristics © Screening to JANTXV Level Available ZS (om| © Low, Medium and High Barrier Diodes
Description
Three families of stripline packaged mixer diodes are offered in a wide range of packages. These diodes have low noise figure through 26 GHz. The three families are: a © Low Barrier diodes for minimum LO drive © Medium Barrier diodes for normal LO drive. © High Barrier diodes for maximum dynamic range and upconverters.
Applications
Stripline and microstrip mixers from 100 MHz Upconverters. Stripline Packaged Schottky Mixer Diodes Maximum Ratings These stripline packaged Schottky barrier mixer diodes Temperature Range are suitable for use in stripline and microstrip mixers. Each Operating (case style 186, 276) 65°C to +150°C family of diodes is listed by barrier height, increasing fre- (case style 137, 213) 65°C to +125°C quency capability, and grouped according to package Storage (case style186,276) 65°C to +150°C we ae a figure. . od (case style 137, 213) 65°C to +125°C e forw. LV characteristics of Schottky diodes are . Incident Power Ratings dependent on the barrier voltage of the metal. The barri- um Peak RF in 1 CX Band 4 Watt for er voltage affects the local oscillator requirement for opti- 1 mi maximum mum RF performances. M/A-COM offers low, medium Ku-K Band 0.5 Watt for and high barrier Schottky mixer diodes. tite 4 maximum Electrical characteristics and packaging other than the stan- Maximum CW RF incident Power C-X Band 150 mW dard specifications listed, may be available upon request. Ku-K Band 100 mw For more information, contact the factory. Solder Temperature Ratings (case style 137, 213) 200°C for 5 seconds, 1mm from package (case style 186, 276) 225°C for 5 seconds, 1mm from package Specifications Subject to Change Without Notice. M/A-COM, Inc. a 5-45 North America: Tel. (800) 366-2266 = Asia/Pacific: Tel. +81 (03) 3226-1671 = Europe: Tel. +44 (1344) 869 595
7 Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020
Stripline Packaged Schottky Mixer Diodes V 2.00 Specifications @ Ta = +25°C Low Barrier Stripline Packaged Schottky Diodes Low barrier diodes normally are most satisfactory for use in balanced mixers where the local oscillator drive level is between 0.5 dBM and +3 dBM per diode. Maximum? Ze Ranges Model Test Frequency Noise Figure MinJMax. Number (GHz) (dB) (Ohms) A a [waaoiosare [ena CC Medium Barrier Stripline Schottky Diodes Medium barrier diodes are normally most satisfactory for use in balanced mixers where the local oscillator drive level is between +0 dBM and +10 dBM per diode. Maximum! Maximum2 Zp Range? Model Test Frequency Noise Figure SWR Min/Max. Number Case Style (GHz) (dB) (Volts) (Ohms) a OC A a I i Notes: 1. Test conditions for noise figure: 3. Ip impedance is measured by modulating the specified test frequency Pig = 1 mW (for low and medium barrier) with a 1000 Hz signal. R, = 22 Ohms. Low and medium barrier diodes Pig = 2 mW (for high barrier) are tested at an incident power level of 1 mW. High barrier diodes are Fip = 30 MHz tested at an incident power level of 2 mW. Np = 1.5 dB (minimum) R, = 22 ohms 2. SWR for low and medium barrier diodes is tested at LO power of 1.0 mW. High barrier diodes are tested at a LO power level of 2 mW. R, = 22 Ohms, ‘Specifications Subject to Change Without Notice. 5460 MA-COM, Inc. North America: Tel. (800) 366-2266 m= Asia/Pacific: Tel. +81 (03) 3226-1671 = Europe: Tel. +44 (1344) 869 595 - Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020
Stripline Packaged Schottky Mixer Diodes v2.00 Specifications (Cont'd) High Barrier Stripline Schottky Diodes High barrier diodes are normally most satisfactory for use in balanced mixers where the local oscillator drive level is between + 6 dBM and + 15 dBM per diode. Maximum? Maximum2 Zip Ranges Model Test Frequency Noise Figure swR Min/Max. Number Case Style (GHz) (aB) (Volts) (Ohms) MA40045 137 6.000 55 15 200/500 MA40060 213 6.000 55 15 200/500 MA40095, 137 9.375 6.0 15 250/450 MAE197 186 9.378 6.0 15 250/450 MA4E199 186 9.375 7.0 20 250/450 MA40094 213 9.375 65 15 250/450 I MA4E185-276 276 9.376 6.0 15 250/450 MA4E190-276 276 16.000 65 15 250/450 MA4E926-276 276 24.000 75 15 200/500 Notes: 1. Test conditions for noise figure: 3. Ip impedance is measured by modulating the specified test frequency Pig = 1 mW (for low and medium barrier) with a 1000 Hz signal. R, = 22 Ohms. Low and medium barrier diodes Pio = 2 mW (for high barrier) are tested at an incident power level of 1 mW. High barrier diodes are Fie = 30 MHz tested at an incident power level of 2 mW. Nip = 1.5 dB (minimum) R, = 22 ohms 2. SWR for low and medium barrier diodes is tested at LO power of 1.0 mW. High barrier diodes are tested at a LO power level of 2 mW. R, = 22 Ohms. Case Styles (See appendix for complete dimensions) ee OD ee meee 137 186 (Plastic Encapsulation) (Hermetic Ceramic package) 7 = JT ox —-—>=- = cl i 213 276 (Plastic Encapsulation) (Hermetic Ceramic package) ‘Specifications Subject to Change Without Notice. M/A-COM, Inc, 5-47 North America: Tel. (800) 366-2266 m= Asia/Pacific: Tel. +81 (03) 3226-1671 m Europe: Tel. +44 (1344) 869 595 ~ Fax (800) 618-8883 Fax. +81 (03) 3226-1451 Fax +44 (1344) 300 020
Stripline Packaged Schottky Mixer Diodes nO V 2.00 Specifications (Cont'd) All stripline ceramic packaged Schottky mixer diodes can be screened to TX or TXV levels. Screened Diodes MIL-STD19500 (Case Style 186, 276) Method Inspection (MIL-STD-750) Condition Internal Visual 2073 See note High Temperature Life (stabilization bake) 1032 T = 24 hours, Ty = +150°C Thermal Shock 1051 20 cycles -85°C to +125°C, T extreme >10 minutes Constant Acceleration 2006 20,000 g's, Y1 direction Fine Leak 1071 H Gross Leak 1071 CorE Electrical See note HTRB 1038 Ta = +150°C, Vp = 80% Vp, T = 48 hours minimum Pre Burn-In Electrical See note Burn-in 1038 Condition B, T, = +25°C, Ipk = 10 mA, T= 96 hours minimum Final Electricals and Delta See note Note: 4. Conditions and details of test depend on the specific model number. Information available from the factory on request. Typical Performance Curves NOMINAL 1-V CHARACTERISTIC AND BARRIER HEIGHTS FOR NOMINAL SCHOTTKY BARRIER NOISE FIGURE vs LO POWER SCHOTTKY MIXER DIODES ama 9.0) 10.0 H ito Tey Mig 2ma ‘MEDIUM BARRIER an A = 80) NTI ial Wi 1 99% sna _[ ttoreaenen TY 2 LAIN Wissen 3 Ty g tT RT ITT Ty yal © CTMNNGL aie Hi \\ERREEED Ay 2 oo INN 102 Fa I “ 5 LL LT 2 CUM IM. 10 3 50 + H 608 | ; | ne g Ip FREQ = 30 MHz 2 NFig =1508 300A 3.0| 4.0 6 5 -4 -3 -2-1 0 020406 08 Ot 050.1 Os 1.0 5,010.0 VOLTS LO POWER (mw) INAL NOISE FIG! FRI NOMINAL L-V CHARACTERISTICS AND BARRIER HEIGHTS FOR Nom URE vs FREQUENCY SCHOTTKY MIXER DIODES 7.0; 1200, ee TTT [Tiere || tipo || ;”" i neva 8 wld ier Fa eC Babies] [hee = ° ane? 4608 ESS DEH * OL Merten T Pr TT Tt TT oy ett TET. | d rr a 12 5 10 20 5.0 10.0 FREQUENCY (GHz) LOCAL OSCILLATOR POWER (mW) ‘Specifications Subject to Change Without Notice. 548 MIA-COM, Inc. North America: Tel. (800) 366-2266 = Asia/Pacific: Tel. +81 (03) 9226-1671 = Europe: Tel. +44 (1344) 869 595 - Fax (800) 618-8883 Fax +81 (03) 3226-1451 Fax +44 (1344) 300 020