MA200 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: MA-200 MA-200 SPECIFICATIONS ES-8172 Rev.3 Page 1/3 https://www.m-system.co.jp/ Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY (2 A, 200 / 220 / 240 V AC) Functions & Features

  • Designed specifically for AC power supplies up to 2 amps
  • No degradation of normal (50/60 Hz) line frequency
  • Power indicator lamp provided M•RESTER MA TERMINAL NO. FUSE FUSE LINE SIDE INSTRU SIDE GROUND 1 8 4 5 2 3 6 7 50 [1.97] 119.5 [4.7] 80 [3.15] mm [inch] MODEL: MA–200[1]

ORDERING INFORMATION

  • Code number: MA-200[1] Specify a code from below for [1]. (e.g. MA-200/CE) [1] OPTIONS Standards & Approvals blank: Without CE /CE: CE marking GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Chromated steel Housing material: Flame-resistant resin (black) Monitor lamp: Red neon lamp turns on when the power is supplied. INSTALLATION Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 330 g (0.73 lb) PERFORMANCE Discharge voltage (peak voltage) Line to line: 410 V min. Line to ground: 410 V min. Maximum surge voltage Line to line: 700 V max. Line to ground: 700 V max. (The maximum voltage that could pass through M-RESTER. Protected equipment must be able to withstand this voltage for very short time period.) Response time: ≤ 0.1 μsec. Leakage current Line to line: ≤ 1 mA @ 300 V DC Line to ground: ≤ 1 mA @ 300 V DC Max. discharge current (Imax): 1000 A (8/ 20 μsec.) Max. load current: 2 A Voltage drop: ≤ 2 V (50/60 Hz) Rated line voltage: 200 V / 220 V / 240 V AC STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 RoHS Directive

MODEL: MA-200 MA-200 SPECIFICATIONS ES-8172 Rev.3 Page 2/3 https://www.m-system.co.jp/ CONNECTION EXAMPLES AC POWER 1 – 5V DC M-RESTER G U V G SURGE PROTECTOR Cable Protected Equipment Ground one of the terminals 2, 3, 6 and 7. GROUNDING M-RESTER PROTECTED EQUIPMENT GG CROSSOVER WIRE GROUNDING (100 ohms or less) A crossover wire between M-RESTER ground and ground or metallic housing of equipment is required for protection. If the protected equipment has no ground terminal, ground the M-RESTER only. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENT unit: mm [inch] 3456 2187 80 [3.15] 80 [3.15] [.79] 40 [1.57] 50 [1.97] 7.8 [.31] CLAMP (top & bottom) DIN RAIL 35mm wide FUSE (two) 2–4.5 [.18] dia. MTG HOLE 15 [.59] deep 8–M3.5 SCREW

  • When mounting, no extra space is needed between units. MONITOR LED

MODEL: MA-200 MA-200 SPECIFICATIONS ES-8172 Rev.3 Page 3/3 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY Base Socket TO CABLE 1 4 TO EQUIPMENT GROUND TERMINALS 2 3 6 7 HF Filter Discharge Elements Discharge Elements Specifications are subject to change without notice.