MA01502D MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Limiter/Low Noise Amplifier Die Preliminary Release (8.5 - 12.0 GHz) Specifications subject to change without notice. 903068 /square6 North America: Tel. (800)366-2266, Fax (800)618-8883 /square6 Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 /square6 Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information

FEATURES

  • 8.5 to 12 GHz Operation
  • 10W CW Power Handling Capability
  • 50Ω Input Impedance
  • Excellent Return Loss
  • Self-Aligned MSAG® MESFET Process Balanced Two Stage LNA with Limiter DESCRIPTION MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) Rating Symbol Value Unit DC Drain Supply Voltage V DD 8 Vdc DC Gate Supply Voltage V GG -6 Vdc RF Input Power PIN 15 W Junction Temperature T J 150 °C Storage Temperature T STG -40 to +150 °C The MA01502D is a balanced, two-stage low noise amplifier and limiter die fabricated using M/A-COM’s mature GaAs Self-Aligned MSAG MESFET Process. This product is fully matched to 50 ohms on both the input and the output. ELECTRICAL CHARACTERISTICS VDD=5.0 V, VGG=-5.0 V, T=25 °C, Input and Output Connected to 50 Ω System. Characteristic Symbol Min Typ Max Unit Frequency Range f 8.5 — 12.0 GHz Gain G 13 14 18 dB 1dB Compression Point P 1db +20 dBm Gain Flatness (Peak-to-Peak over any 250 MHz band) — — 0.4 1 dB Noise Figure NF — 2.7 3.5 dB Input Third Order Intercept Point TOI 13 dBm Input and Output Return Loss RL 13 20 — dB Drain Bias voltage VDD — 5 — VDC Gate Bias Voltage VGG -5 VDC Drain Supply Current (No RF) IDD — — 160 mA Drain Supply Current (Max @ Pin = 10 Watts) IDD — — 200 mA Gate Supply Current IGG — — 30 mA Power Handling Capability (CW up to 30 minutes continuous exposure) PRF 10 — — W

Limiter/Low Noise Amplifier Die (8.5 - 12.0 GHz) MA01502D Specifications subject to change without notice. 903068 /square6 North America: Tel. (800)366-2266, Fax (800)618-8883 /square6 Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 /square6 Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information Typical Measured Gain and Noise Figure of the Two-stage Limiter/LNA FREQUENCY(GHz) Gain and Noise Figure (dB) gain nf

Limiter/Low Noise Amplifier Die (8.5 - 12.0 GHz) MA01502D Specifications subject to change without notice. 903068 /square6 North America: Tel. (800)366-2266, Fax (800)618-8883 /square6 Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 /square6 Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information Typical Measured S 11 and S 22 of the Two-stage Limiter/LNA -40 -35 -30 -25 -20 -15 -10 FREQUENCY(GHz) S11 and S22 (dB) s11 s22

Limiter/Low Noise Amplifier Die (8.5 - 12.0 GHz) MA01502D Specifications subject to change without notice. 903068 /square6 North America: Tel. (800)366-2266, Fax (800)618-8883 /square6 Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 /square6 Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information TYPICAL MEASURED GAIN OF THE LIMITER/LNA TESTED BEFORE AND AFTER

30 MINUTES EXPOSURE WITH 40dBm CW POWER

0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 FREQUENCY ( GHz ) GAIN ( dB ) InitialGain GainAfter30Minutes@40.0dBm TYPICAL MEASURED NOISE FIGURE OF THE LIMITER/LNA TESTED BEFORE AND AFTER 30 MINUTES EXPOSURE WITH 40dBm CW POWER 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 FREQUENCY ( GHz ) Noise Figure (dB) Initial_NF NF_After30Minutes@40.0dBm

Limiter/Low Noise Amplifier Die (8.5 - 12.0 GHz) MA01502D Specifications subject to change without notice. 903068 /square6 North America: Tel. (800)366-2266, Fax (800)618-8883 /square6 Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298 /square6 Europe: Tel. +44 (1344) 869 595, Fax +44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information MECHANICAL INFORMATION 3100 4600 2584 1160 2360 700 NOTES: Dimensions in microns Pad size 150 µmx150 µm RF IN RF OUT VGG VDD