MA01-HI MINMAX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
E-mail:sales@minmax.com.tw Tel:886-6-2923150 2014/04/18 REV:3 Page 1 of 4 MA01-HI SERIES DC/DC CONVERTER 1W, High Isolation,SIP-Package
FEATURES
►Standard SIP-7 Package ►Very high 5200V I/O-isolation ►Common Mode Transient Immunity:15KV/μs ►Operating Temp.Range -40°C to +85°C ►Industry Standard Pinout ►UL/cUL/IEC/EN 60950-1 Safety Approval ►3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MA01-HI series is a new range of isolated 1W DC/DC converter modules in SIP-package which feature a very high I/O-isolation voltage rated for 5200V.A very high common mode transient immunity qualifies these product for IGBT applications.There are 40 Models available for 5, 12, 15 or 24VDC input.These converters offer a cost-effective solution for all applications where a very high I/O –isolation is required. Model Selection Guide Model Number Input Voltage (Range) Output Voltage Output Current Input Current Load Regulation Max. capacitive Load Efficiency (typ.) Max. @Max. Load @No Load @Max. Load VDC VDC mA mA(typ.) mA(typ.) % (max.) μF % MA01-05S033HI 5 ±10% 3.3 303 286 20 1000 70 MA01-05S05HI 5 200 286 15 470 70 MA01-05S09HI 9 111 266 10 470 75 MA01-05S12HI 12 84 261 10 220 77 MA01-05S15HI 15 66 254 10 220 78 MA01-05D05HI ±5 ±100 282 15 220# 71 MA01-05D09HI ±9 ±56 269 10 220# 75 MA01-05D12HI ±12 ±42 262 10 100# 77 MA01-05D15HI ±15 ±33 254 10 100# 78 MA01-05A1509HI 15 +33 260 10 100 76 -9 -55 220 MA01-12S033HI 12 ±10% 3.3 303 117 20 1000 71 MA01-12S05HI 5 200 117 15 470 71 MA01-12S09HI 9 111 110 10 470 76 MA01-12S12HI 12 84 108 10 220 78 MA01-12S15HI 15 66 104 10 220 79 MA01-12D05HI ±5 ±100 116 15 220# 72 MA01-12D09HI ±9 ±56 111 10 220# 76 MA01-12D12HI ±12 ±42 108 10 100# 78 MA01-12D15HI ±15 ±33 104 10 100# 79 MA01-12A1509HI 15 +33 107 10 100 77 -9 -55 220 MA01-15S033HI 15 ±10% 3.3 303 95 20 1000 70 MA01-15S05HI 5 200 95 15 470 70 MA01-15S09HI 9 111 89 10 470 75 MA01-15S12HI 12 84 90 10 220 75 MA01-15S15HI 15 66 84 10 220 79 MA01-15D05HI ±5 ±100 94 15 220# 71 MA01-15D09HI ±9 ±56 90 10 220# 75 MA01-15D12HI ±12 ±42 86 10 100# 78 MA01-15D15HI ±15 ±33 84 10 100# 79 MA01-15A1509HI 15 +33 87 10 100 76 -9 -55 220 MA01-24S033HI 24 ±10% 3.3 303 60 20 1000 70 MA01-24S05HI 5 200 60 15 470 70 MA01-24S09HI 9 111 56 10 470 75 MA01-24S12HI 12 84 53 10 220 78 MA01-24S15HI 15 66 52 10 220 80 MA01-24D05HI ±5 ±100 59 15 220# 71 MA01-24D09HI ±9 ±56 56 10 220# 75 MA01-24D12HI ±12 ±42 55 10 100# 77 MA01-24D15HI ±15 ±33 53 10 100# 78 MA01-24A1509HI 15 +33 55 10 100 75 -9 -55 220 # For each output
DC/DC CONVERTER 1W, High Isolation,SIP-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2014/04/18 REV:3 Page 2 of 4 Input Specifications Parameter Model Min. Typ. Max. Unit Input Surge Voltage (1 sec. max.) 5V Input Models -0.7 --- 9 VDC 12V Input Models -0.7 --- 18 15V Input Models -0.7 --- 20 24V Input Models -0.7 --- 30 Input Voltage Range 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 15V Input Models 13.5 15 16.5 24V Input Models 21.6 24 26.4 Internal Filter Type All Models Internal Capacitor Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- --- ±5.0 % Output Voltage Balance Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.2 --- % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise 0-20MHz Bandwidth --- --- 100 mV P-P Temperature Coefficient --- ±0.01 ±0.02 %/ ℃ Short Circuit Protection Continuous General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) 60 Seconds 5200 --- --- VDC I/O Isolation Test Voltage Flash tested for 1 Seconds 5700 --- --- VDC I/O Isolation Resistance 500 VDC 10 --- --- G Ω I/O Isolation Capacitance 100KHz, 1V --- 7 --- pF Common Mode Transient Immunity 15 --- --- KV/ μs Switching Frequency --- 100 --- KHz MTBF (calculated) MIL-HDBK-217F@25 ℃, Ground Benign 2,000,000 Hours Safety Approvals UL/cUL 60950-1 recognition(CSA certificate), IEC/EN 60950-1(CB-scheme) Environmental Specifications Parameter Conditions Min. Max. Unit Operating Ambient Temperature Range (See Power Derating Curve) Natural Convection -40 +85 ℃ Case Temperature --- +100 ℃ Storage Temperature Range -55 +125 ℃ Humidity (non condensing) --- 95 % rel. H Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) --- 260 ℃ Power Derating Curve Ambient Temperature 100 -40 50 60 80 100 110 9070 Natural Convection 20LFM C
DC/DC CONVERTER 1W, High Isolation,SIP-Package E-mail:sales@minmax.com.tw Tel:886-6-2923150 2014/04/18 REV:3 Page 3 of 4 Notes 1 Specifications typical at Ta=+25 ℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 These power converters require a minimu m output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be av ailable, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Pin Connections Pin Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout
6 No Pin Common
►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) Physical Characteristics Case Material : Non-Conductive Black Plas tic (flammability to UL 94V-0 rated) Pin Material : Alloy 42 Weight : 2.4g 10.2 [0.40] 0.5 [0.02] 0.5 [0.02] 3.2 [0.13]7.1 [0.28] 19.5 [0.77] 2.0 [0.08] 0.25 [0.01] Bottom View 1 2 65 2X2.54 2X[0.10] 7.62 [0.30] 2.54 [0.10] 18.5 [0.73] 0.50 [0.02]
DC/DC CONVERTER 1W, High Isolation,SIP-Package 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw 2014/04/18 REV:3 Page 4 of 4 Minmax Technology Co., Ltd. Test Setup Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Out -Out +Vin -Vin Single Output DC / DC Converter Resistive LoadScope Copper Strip Cout Copper Strip +Out -Out +Vin -Vin Dual Output DC / DC Converter Resistive Load Scope Copper Strip Cout Com. ScopeCout Copper Strip Copper Strip Technical Notes Maximum Capacitive Load The MA01-HI series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < +Out -Out +Vin -Vin DC / DC Converter LoadDC Power Source Cin Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 1.0μF capacitors at the output. +Out -Out +Vin -Vin Load DC Power Source Cout Single Output DC / DC Converter +Out -Out +Vin -Vin Load DC Power Source CoutCom. Dual Output DC / DC Converter Load Cout DC / DC Converter +V i n - Vin +Out -Out Load2 Dual Output Com. Load1DC Power Source Cout1 Cout2- Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 100℃. The derating curves are determined from measurements obtained in a test setup. DUT Position of air velocity probe and thermocouple 50mm / 2in Air Flow 15mm / 0.6in