M8BS8 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 1/8 http://www.m-system.co.jp/ Dual Output Super-mini Signal Conditioners Pico-M Series INSTALLATION BASE (8 positions) Functions & Features

  • Holding up to 8 modules of Pico-M series signal conditioners
  • Power supplied through printed wiring on the base
  • Saving wiring work within an instrumentation panel MODEL: M8BS-8[1]-[2][3]

ORDERING INFORMATION

  • Code number: M8BS-8[1]-[2][3] Specify codes from below for each of [1] through [3]. (e.g. M8BS-8U1-R/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] CONNECTION (output 1/output 2) U0: Screw terminal block / Screw terminal block U1: Fujitsu FCN type connector / Screw terminal block E1: Toshiba DCS SAMP1 use / Screw terminal block (Panasonic AXM240001 used) (DISCONTINUED; reprace with code "E1A".) E1A: Toshiba DCS SAMP1 supported / Screw terminal block (Omron XG4A-4031 used) E3: Toshiba DCS SAIN1 use / Screw terminal block (Panasonic AXM220001 used) (DISCONTINUED; replace with code "E3A".) E3A: Toshiba DCS SAIN1 supported / Screw terminal block (Omron XG4A-2031 used) K3: Azbil DCS J-PIM00 module use / Screw terminal block [2] POWER SUPPLY UNIT AC Power K: 85 – 132 V AC; single power source (Operational voltage range 85 – 132 V, 47 – 63 Hz) KK: 85 – 132 V AC; two independent power sources (Operational voltage range 85 – 132 V, 47 – 63 Hz) L: 170 – 264 V AC; single power source (Operational voltage range 170 – 264 V, 47 – 63 Hz) DC Power R: 24 V DC; no power supply unit (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Redundant power supplies are recommended for long time use without interruption. [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Only solder side of the main PWB is coated. /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Capacity: 8 positions Connection Power input: M3.5 screw terminals (M3 screw terminals for AC power input) (torque 0.8 N·m, 0.5 N·m for AC power input) Input and output: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel Isolation: Input to output 1 to output 2 to power to FG Power indicator LED: ON with normal voltage level INSTALLATION Power Consumption
  • AC: 130 VA min.
  • DC: 0.7 A min. Operating temperature: 0 to 55°C (32 to 131°F) 0 to 50°C (32 to 122°F) for AC power Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface Weight: 0.8 kg (1.8 lb) for power code K, L 0.9 kg (2.0 lb) for power code KK 0.7 kg (1.5 lb) for power code R PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength:

1500 V AC @1 minute (input to output 1 or output 2 or

power to FG)

500 V AC @1 minute (output 1 to output 2 to power)

500 V AC @1 minute (output 1 or output 2 to FG for AC

power input) MOUNTING REQUIREMENTS unit: mm (inch) 260 (10.24) 4–M5 SCREW 50 (1.97)

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 2/8 http://www.m-system.co.jp/ CONNECTION DIAGRAM ■ MODEL: M8BS-8U0 (screw terminal block / screw terminal block) ■ CONNECTION DIAGRAM A B C D Ch.1 INPUT*A B C D Ch.8 INPUT* PWR2 ■ DC Power Supply ■ Single Power Supply, Two Independent Power Sources FG 3 U V AC POWER PWR1 4 FG 3 U V AC POWER FG POWER OUTPUT 1 A B C D Ch.1 INPUT*A B C D Ch.8 INPUT* OUTPUT 2 OUTPUT 1 OUTPUT 2 Ch.1 OUTPUT* –Ch.8 OUTPUT* OUTPUT 1 OUTPUT 2 OUTPUT 1 OUTPUT 2 Ch.1 OUTPUT* –Ch.8 OUTPUT* PWR2 provided only for two independent power sources. * The input and output terminals are reversed for model M8YSx, M8YCx. Use either Output 1 or Output 2 terminal for the input. ■ MODEL: M8BS-8U1 (Fujitsu FCN type connector, FCN-364P040-AU / screw terminal block)

  • Connector Pin Assignment CN1: Output 1 or input PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT A1 ch.1 + B1 ch.1 – A2 ch.2 + B2 ch.2 – A3 ch.3 + B3 ch.3 – A4 ch.4 + B4 ch.4 – A5 ch.5 + B5 ch.5 – A6 ch.6 + B6 ch.6 – A7 ch.7 + B7 ch.7 – A8 ch.8 + B8 ch.8 – A9 – A20, B9 – B20: Unused

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 3/8 http://www.m-system.co.jp/ ■ CONNECTION DIAGRAM A B C D CN1 Ch.1 INPUT*A B C D Ch.8 INPUT* PWR2 4 FG 3 U V AC POWER PWR1 4 FG 3 U V AC POWER FG 3 A B C D CN1 Ch.1 INPUT*A B C D Ch.8 INPUT* ■ DC Power Supply ■ Single Power Supply, Two Independent Power Sources OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT* Ch.8 OUTPUT* OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT* Ch.8 OUTPUT* POWER PWR2 provided only for two independent power sources. * The input and output terminals are reversed for model M8YSx, M8YCx. Use either Output 1 (connector) or Output 2 terminal for the input. ■ MODEL: M8BS-8E1A (Toshiba DCS SAMP1 use / screw terminal block)

  • Connector Pin Assignment Output connector : Omron XG4A-4031 CN1: SAMP1 The input or output 1 is connected to the connector. PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT

1 NC 21 NC

2 NC 22 NC

3 NC 23 ch.5 + 4 NC 24 ch.5 –

5 NC 25 NC

6 NC 26 NC

7 NC 27 ch.4 + 8 NC 28 ch.4 –

9 NC 29 NC

10 NC 30 NC

11 ch.8 + 31 ch.3 + 12 ch.8 – 32 ch.3 –

13 NC 33 NC

14 NC 34 NC

15 ch.7 + 35 ch.2 + 16 ch.7 – 36 ch.2 –

17 NC 37 NC

18 NC 38 NC

19 ch.6 + 39 ch.1 + 20 ch.6 – 40 ch.1 – Toshiba DCS SAMP1 uses Panasonic AXM240001. As connector is discontinued, Omron XG4A-4031 is used as an alternative. (Replace cable side.)

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 4/8 http://www.m-system.co.jp/ ■ MODEL: M8BS-8E3A (Toshiba DCS SAIN1 use / screw terminal block) PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT 1 NC 11 ch.5 – 2 NC 12 ch.5 + 3 NC 13 ch.4 – 4 NC 14 ch.4 + 5 ch.8 – 15 ch.3 – 6 ch.8 + 16 ch.3 + 7 ch.7 – 17 ch.2 – 8 ch.7 + 18 ch.2 + 9 ch.6 – 19 ch.1 – 10 ch.6 + 20 ch.1 +

  • Connector Pin Assignment Output connector : Omron XG4A-2031 CN1: SAIN1 CN2: SAIN1 for redundancy Toshiba DCS SAMP1 uses Panasonic AXM220001. As connector is discontinued, Omron XG4A-2031 is used as an alternative. (Replace cable side.) ■ CONNECTION DIAGRAM A B C D CN1 Ch.1 INPUT A B C D Ch.8 INPUT PWR2 4 FG 3 U V AC POWER PWR1 4 FG 3 U V AC POWER FG 3 A B C D CN1 CN2CN2 Ch.1 INPUT A B C D Ch.8 INPUT ■DC Power Supply ■Single Power Supply, Two Independent Power Sources OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT Ch.8 OUTPUT OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT Ch.8 OUTPUT POWER * For model M8BS-8E3A. ** The input and output terminals are reversed for model M8YSx, M8YCx. Use either Output 1 (connector) or Output 2 terminal for the input. * * PWR2 provided only for two independent power sources.

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 5/8 http://www.m-system.co.jp/ ■ MODEL: M8BS-8K3 (Azbil DCS J-PIM00 module use / screw terminal block) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 I/O cable : J-SSL / J-SSK J-SRL / J-SRK

  • Location Output connector : 57GE-40500-751 CN1 : J-PIM00 module use The input or output 1 is connected to the connector. Pico-M LOCATION NO. AZBIL DCS PI CONNECTOR The internal power supply is used for excitation of the pulse input module. ■ CONNECTION DIAGRAM A B C D CN1 Ch.1 INPUT*A B C D Ch.8 INPUT* PWR2 4 FG 3 U V AC POWER PWR1 4 FG 3 U V AC POWER FG 3 A B C D CN1 Ch.1 INPUT*A B C D Ch.8 INPUT* ■ DC Power Supply ■ Single Power Supply, Two Independent Power Sources OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT* Ch.8 OUTPUT* OUTPUT 2 OUTPUT 2 Ch.1 OUTPUT* Ch.8 OUTPUT* POWER PWR2 provided only for two independent power sources. * The input and output terminals are reversed for model M8YSx, M8YCx. Use either Output 1 (connector) or Output 2 terminal for the input.

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 6/8 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) ■ M8BS-8U0-R 1 2 3 4 5 6 7 8 1 2 3 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B + – + 95 (3.74) 50 (1.97) 240 (9.45) 260 (10.24) 280 (11.02) 87 (3.43) 3–M3.5 POWER TERMINALS 8.6 (.34) 17 (.67) POWER LED 7.3(.29) 32–M3.5 OUTPUT TERMINALS 32–M3.5 INPUT TERMINALS 7.3 (.29) OUTPUT 2 TERM. OUTPUT 1 TERM. CT PROTECTOR (CTR) *1 *1. Included with M8CTx. ■ M8BS-8U0-K, KK, L 1 2 3 4 5 6 7 8 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B 95 (3.74) 50 (1.97) 260 (10.24) 280 (11.02) 17 (.67) PWR1PWR2 + – + 5–M3 POWER TERMINALS (.24) POWER LED*2 7.3(.29) 32–M3.5 OUTPUT TERMINALS POWER UNITS*1 87 (3.43) 106 (4.17) 32–M3.5 INPUT TERMINALS 7.3 (.29) OUTPUT 2 TERM. OUTPUT 1 TERM. POWER LED *31 *1. PWR2 provided only for two independent power sources. *2. Provided only for two independent power sources. *3. Provided only for single power source. *4. Included with M8CTx. CT PROTECTOR (CTR) *4

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 7/8 http://www.m-system.co.jp/ ■ M8BS-8U1, 8E1A, 8K3-R 1 2 3 4 5 6 7 8 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B 1 2 3 88 (3.46) 50 (1.97) 7.3 (.29) 240 (9.45) 260 (10.24) 280 (11.02) 32 - M3.5 INPUT TERMINALS 87 (3.43) 7.2 (.28) 16-M3.5 OUTPUT TERMINALS CT PROTECTOR (CTR) *1 POWER LED CONNECTOR CN1 3-M3.5 POWER TERMINALS 8.6 (.34) *1. Included with M8CTx. ■ M8BS-8U1, 8E1A, 8K3-K, KK, L 1 2 3 4 5 6 7 8 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B5 PWR1PWR2 88 (3.46) 50 (1.97) 260 (10.24) 280 (11.02) 87 (3.43) 17 (.67) POWER LED*3 CONNECTOR CN1 7.2(.28) 16–M3.5 OUTPUT TERMINALS 106 (4.17) POWER LED*2 POWER UNITS*1 5–M3 POWER TERMINALS (.24) 32–M3.5 INPUT TERMINALS 7.3 (.29) *1. PWR2 provided only for two independent power sources. *2. Provided only for two independent power sources. *3. Provided only for single power source. *4. Included with M8CTx. CT PROTECTOR (CTR) *4

MODEL: M8BS-8 M8BS-8 SPECIFICATIONS ES-5491 Rev.13 Page 8/8 http://www.m-system.co.jp/ ■ M8BS-8E3A-R 1 2 3 4 5 6 7 8 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B 1 2 3 88 (3.46) 50 (1.97) 240 (9.45) 260 (10.24) 280 (11.02) 87 (3.43) 7.2(.28) 16–M3.5 OUTPUT TERMINALS 17 (.67) POWER LED CONNECTORS CN2 CN1 3–M3.5 POWER TERMINALS 8.6 (.34) 32–M3.5 INPUT TERMINALS 7.3 (.29) CT PROTECTOR (CTR) *1 *1. Included with M8CTx. ■ M8BS-8E3A-K, KK, L 1 2 3 4 5 6 7 8 CH1 CH8 C D C D C D C D C D C D C D C D CH8CH1 A B A B A B A B A B A B A B A B5 PWR1PWR2 88 (3.46) 50 (1.97) 260 (10.24) 280 (11.02) 87 (3.43) 17 (.67) 7.2(.28) 16–M3.5 OUTPUT TERMINALS 106 (4.17) POWER LED*2 POWER UNITS*1 5–M3 POWER TERMINALS (.24) 32–M3.5 INPUT TERMINALS 7.3 (.29) POWER LED *3 CONNECTORS CN2 CN1 *1. PWR2 provided only for two independent power sources. *2. Provided only for two independent power sources. *3. Provided only for single power source. *4. Included with M8CTx. CT PROTECTOR (CTR) *4 Specifications are subject to change without notice.