M8AP1 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M8AP1 M8AP1 SPECIFICATIONS ES-5371 Rev.4 Page 1/3 http://www.m-system.co.jp/ Dual Output Super-mini Signal Conditioners Pico-M Series DC/FREQUENCY CONVERTER (CE) Functions & Features

  • Providing pulse rate outputs in proportion to DC input signal
  • Space-saving, easy-to-maintain, multi-channel installation base MODEL: M8AP1-[1][2]-R[3]

ORDERING INFORMATION

  • Code number: M8AP1-[1][2]-R[3] Specify a code from below for each of [1] through [3]. (e.g. M8AP1-6A1A1-R/Q)
  • Output frequency range (e.g. 0 – 500 Hz)
  • Specify the specification for option code /Q (e.g. /C01 ) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) Voltage 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) [2] OUTPUT 1 / OUTPUT 2 A1A1: Open collector / open collector (max. 10 kHz) M1M1: 5 V pulse / 5 V pulse (max. 10 kHz) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • Installation Base or Single Mount Base Socket (model: M8BSx) This unit must be mounted on dedicated base or socket except Model M8BS2 base. GENERAL SPECIFICATIONS Construction: Plug-in Mounting screw: M3 screw (torque 0.3 N·m) Housing material: Flame-resistant resin (black) Power supply: Via the Installation Base terminals (model: M8BSx) Isolation: Input to output 1 to output 2 to power Zero adjustment: 0 – 2 % (front) Span adjustment: 98 to 102 % (front) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated ■ DC Voltage Input resistance: 1 MΩ min. (10 kΩ min. in power failure) OUTPUT SPECIFICATIONS Frequency range: 0 – 0.01 Hz through 10 kHz (Same frequency for both outputs.) ■ Open Collector: 50 V DC @50 mA Saturation voltage: 0.5 V DC ■ 5 V Pulse Hi level: 5 V ±10 % Lo level: ≤ 0.5 V Load resistance: 1000 Ω min. OUTPUT PULSE WIDTH
  • Open Collector •Voltage Pulse OFF ON 50 %50 % 1 / f 50 %50 % 1 / f H Level L Level INSTALLATION Current consumption: Approx. 60 mA Operating temperature: 0 to 55°C (32 to 131°F) Operating humidity: 30 to 95 %RH (non-condensing)

MODEL: M8AP1 M8AP1 SPECIFICATIONS ES-5371 Rev.4 Page 2/3 http://www.m-system.co.jp/ Mounting: Installation Base (model: M8BSx) Weight: 70 g (2.5 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: Approx. 3 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength:

1500 V AC @1 minute (input to output 1 or output 2 or

power to ground)

500 V AC @1 minute (output 1 to output 2 to power)

SWC test: ANSI/IEEE-C37.90.1-1989 STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL DIMENSIONS unit: mm (inch) I/O PINS 17.5(.69) 48 (1.89) 75 (2.95) 83 (3.27)

MODEL: M8AP1 M8AP1 SPECIFICATIONS ES-5371 Rev.4 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Installation Base Low Drift Amplifier OUTPUT 1 OUTPUT 2 SZ D A B C V/F Converter Divider POWER Output Driver Output Driver INPUT *Input shunt resistor incorporated for current input. ■ Open Collector Output Connection Examples ■ Voltage Pulse Specifications are subject to change without notice.