M83401-08-H-1002-F-G | DigiCamel IC Datasheet

Online Datasheet

Read M83401-08-H-1002-F-G online.

4700_17 TTELEC | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 4

Technical content

Commercial and MIL Qualified

4700 Series

Custom configuration available Bonded leads not susceptible to solder reflow problems Absolute tolerance to ±0.1% - ratio accuracy to ±0.01% Absolute TCR to ±15ppm/°C - TC tracking to ±5ppm/°C General Note IRC reserves the right to make changes in product speciﬁ cation without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com

Inherent reliability
MIL-PRF-83401 qualiﬁ ed
Custom conﬁ guration available
Bonded leads not susceptible to solder reﬂ ow problems
Absolute tolerance to ±0.1% - ratio accuracy to ±0.01%
Absolute TCR to ±15ppm/°C - TC tracking to ±5ppm/°C

The IRC 4700 Series is the ultimate combination of precision performance, reliability, and long term stability in a low proﬁ le, TaNFilm® SIP package. Rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride ensure superior ongoing performance over the installed life of the part. Visit our website to view a graphical demonstration of IRC’s TaNFilm reliability and performance features. Schematic Resistance Range (Ω) Absolute Tolerance Ratio Tolerance Absolute TCR (ppm/°C) Tracking TCR (ppm/°C) Element Power (mW) C 120 G 200 F 120 Consult factory for tighter tolerances and TCR. Custom circuits and special testing available. Commercial Product Capability Data High purity alumina substrate Sputtered tantalum nitride with passivation oxide layer Copper leads electroplated with gold over nickel, hot tinned leads available Lid and ceramic substrate totally filled with an epoxy adhesive Thermal compression bonded lead terminations provide exceptional reliability TaNFilm® Precision SIP Network Commercial and MIL Qualified

4700 Series Issue October 2009 Sheet 1 of 4

nickel, hot tinned leads available Lid and ceramic substrate totally filled with an epoxy adhesive Thermal compression bonded lead terminations provide exceptional reliability High purity alumina substrate Resistors All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) 09.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn

TaNFilm® Precision SIP Network Commercial and MIL Qualified

4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Environmental Data Test Per MIL-PRF-83401 MIL-PRF-83401 ∆R Limits TaNFilm® Test Data ∆R M K H Max Typical Schematic Package Power (mW) Voltage Rating Temperature Range Substrate Lead Finish Noise 6-pin 8-pin 10-pin PxR not to exceed 100V Alumina Gold Plate (60/40 Sn/Pb available) <-30dB C, F (MIL and Commercial) 600 840 1080 G (MIL) 360 480 600 G (Commercial) 600 800 1000 Package Speciﬁ cation Data Schematic Resistance Range Absolute Tolerance Element Power (mW) Size Characteristic 100 - 100K B, F, G, J 120 6, 8, 10 M, H, K MIL-PRF-83401 QPL Capability Data TaNFilm® Precision SIP Network Commercial and MIL Qualified

4700 Series Issue October 2009 Sheet 2 of 4

C,G 09.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn

4222 South Staples Street Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com No. Pins IRC Model Number Std Mil Spec Style Hi Rel Mil Style Dim. A 6 476X RZ070 RZ210 0.598 8 478X RZ080 RZ220 0.798 10 470X RZ090 RZ230 0.998 Dim A Max Clean Lead Above Seating Plane 0.187″±0.010 0.135″ +0.015/-0.010 0.045″±0.015 0.026″±0.003 0.322″ Ref 0.070″±0.010 0.015″ min Physical Data Schematic Data Schematic C N = number of pins Schematic F Schematic G TaNFilm® Precision SIP Network Commercial and MIL Qualified

4700 Series Issue October 2009 Sheet 3 of 4

TaNFilm® Precision SIP Network Commercial and MIL Qualified 09.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn

4222 South Staples Street Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com Sample Part No. SIP - 4781 - 03 - 1001 F B Model 4761 = 6-pin SIP , schematic C, gold terminations 4761SD = 6-pin SIP , schematic C, 60/40 Sn/Pb terminations 4768 = 6-pin SIP , schematic F , gold terminations 4768SD = 6-pin SIP , schematic F , 60/40 Sn/Pb terminations 4769 = 6-pin SIP , schematic G, gold terminations 4769SD = 6-pin SIP , schematic G, 60/40 Sn/Pb terminations 4781 = 8-pin SIP , schematic C, gold terminations 4781SD = 8-pin SIP , schematic C, 60/40 Sn/Pb terminations 4788 = 8-pin SIP , schematic F , gold terminations 4788SD = 8-pin SIP , schematic F , 60/40 Sn/Pb terminations 4789 = 8-pin SIP , schematic G, gold terminations 4789SD = 8-pin SIP , schematic G, 60/40 Sn/Pb terminations 4701 = 10-pin SIP , schematic C, gold terminations 4701SD = 10-pin SIP , schematic C, 60/40 Sn/Pb terminations 4708 = 10-pin SIP , schematic F , gold terminations 4708SD = 10-pin SIP , schematic F , 60/40 Sn/Pb terminations 4709 = 10-pin SIP , schematic G, gold terminations 4709SD = 10-pin SIP , schematic G, 60/40 Sn/Pb terminations Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Optional Ratio Tolerance to R1 Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Commercial Sample Part No. M83401 - 08 - H - 1002 - F - G Model M83401 = Military qualiﬁ ed resistor network Size 07 = RZ060 6-pin SIP 08 = RZ080 8-pin SIP 09 = RZ090 10-pin SIP 21 = RZ210 Hi-Rel 6-pin SIP 22 = RZ220 Hi-Rel 8-pin SIP 23 = RZ230 Hi-Rel 10-pin SIP Characteristic per MIL-PRF-83401 M; K; H Resistance Standard 4-digit MIL resistance code Example: 1000 = 100Ω; 1001=1000Ω Absolute Tolerance Code Schematic C; G Standard termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip ﬁ nish. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Military (MIL-PRF-83401) TaNFilm® Precision SIP Network Commercial and MIL Qualified

4700 Series Issue October 2009 Sheet 4 of 4

TaNFilm® Precision SIP Network Commercial and MIL Qualified 09.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronics.com/resistors BI Technologies IRC Welwyn 4222 South Staples Street Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com Sample Part No. SIP - 4781 - 03 - 1001 F B Model 4761 = 6-pin SIP , schematic C, gold terminations 4761SD = 6-pin SIP , schematic C, 60/40 Sn/Pb terminations 4768 = 6-pin SIP , schematic F , gold terminations 4768SD = 6-pin SIP , schematic F , 60/40 Sn/Pb terminations 4769 = 6-pin SIP , schematic G, gold terminations 4769SD = 6-pin SIP , schematic G, 60/40 Sn/Pb terminations 4781 = 8-pin SIP , schematic C, gold terminations 4781SD = 8-pin SIP , schematic C, 60/40 Sn/Pb terminations 4788 = 8-pin SIP , schematic F , gold terminations 4788SD = 8-pin SIP , schematic F , 60/40 Sn/Pb terminations 4789 = 8-pin SIP , schematic G, gold terminations 4789SD = 8-pin SIP , schematic G, 60/40 Sn/Pb terminations 4701 = 10-pin SIP , schematic C, gold terminations 4701SD = 10-pin SIP , schematic C, 60/40 Sn/Pb terminations 4708 = 10-pin SIP , schematic F , gold terminations 4708SD = 10-pin SIP , schematic F , 60/40 Sn/Pb terminations 4709 = 10-pin SIP , schematic G, gold terminations 4709SD = 10-pin SIP , schematic G, 60/40 Sn/Pb terminations Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Optional Ratio Tolerance to R1 Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Commercial Sample Part No. M83401 - 08 - H - 1002 - F - G Model M83401 = Military qualiﬁ ed resistor network Size 07 = RZ060 6-pin SIP 08 = RZ080 8-pin SIP 09 = RZ090 10-pin SIP 21 = RZ210 Hi-Rel 6-pin SIP 22 = RZ220 Hi-Rel 8-pin SIP 23 = RZ230 Hi-Rel 10-pin SIP Characteristic per MIL-PRF-83401 M; K; H Resistance Standard 4-digit MIL resistance code Example: 1000 = 100Ω; 1001=1000Ω Absolute Tolerance Code Schematic C; G Standard termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip ﬁ nish. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Military (MIL-PRF-83401) TaNFilm® Precision SIP Network Commercial and MIL Qualified Commercial and MIL-Screened (Non-QPL) Ordering Data TaNFilm® Precision Flat Pack Networks

8900 Series

09.16 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com BI Technologies IRC Welwyn TaNFilm® Precision Flat Pack Networks

4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Commercial and MIL-Screened (Non-QPL) Ordering Data Preﬁ x Speciﬁ cation Sheet 03 = 14-pin Flat Pack 10 = 16-pin Flat Pack 15 = 14-pin HI REL Flat Pack Characteristic M, K, H Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Schematic A = Isolated; B = Bussed Schematic Standard lead termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip finish. M83401 03 K 1001 F A Preﬁ x Model 8987 = 14-pin Flat Pack, schematic B, gold terminations 8987SD = 14-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations 8987HR = 14-pin HI-REL Flat Pack, schematic B, gold terminations 8989 = 14-pin Flat Pack, schematic A, gold terminations 8989SD = 14-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations 8989HR = 14-pin HI-REL Flat Pack, schematic A, gold terminations 8998 = 16-pin Flat Pack, schematic B, gold terminations 8998SD = 16-pin Flat Pack, schematic B, 60/40 Sn/Pb terminations 8998HR = 16-pin HI-REL Flat Pack, schematic B, gold terminations 8999 = 16-pin Flat Pack, schematic A, gold terminations 8999SD = 16-pin Flat Pack, schematic A, 60/40 Sn/Pb terminations 8999HR = 16-pin HI-REL Flat Pack, schematic A, gold terminations Absolute TCR Commercial Screening 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C MIL-PRF-83401 Group A Screening 04 = ±300ppm/°C Characteristic M; 05 = ±100ppm/°C Characteristic K 06 = ±50ppm/°C Characteristic H; 07 = ±25ppm/°C Characteristic H Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Optional Ratio Tolerance to R1 Notes HI-REL models include a precap inspection and thermo-compression bonded leads. TCR codes 01, 02, 03, and 11 are not available on HI-REL models. Custom schematics and screening available. Contact factory for ordering information. TaNFilm® Precision Flat Pack Networks

8900 Series Issue September 2009 Sheet 3 of 4

FP - 8999 - 03 - 1001 - B F Make Possible 07.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com 4222 South Staples Street Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com Sample Part No. SIP - 4781 - 03 - 1001 F B Model 4761 = 6-pin SIP , schematic C, gold terminations 4761SD = 6-pin SIP , schematic C, 60/40 Sn/Pb terminations 4768 = 6-pin SIP , schematic F , gold terminations 4768SD = 6-pin SIP , schematic F , 60/40 Sn/Pb terminations 4769 = 6-pin SIP , schematic G, gold terminations 4769SD = 6-pin SIP , schematic G, 60/40 Sn/Pb terminations 4781 = 8-pin SIP , schematic C, gold terminations 4781SD = 8-pin SIP , schematic C, 60/40 Sn/Pb terminations 4788 = 8-pin SIP , schematic F , gold terminations 4788SD = 8-pin SIP , schematic F , 60/40 Sn/Pb terminations 4789 = 8-pin SIP , schematic G, gold terminations 4789SD = 8-pin SIP , schematic G, 60/40 Sn/Pb terminations 4701 = 10-pin SIP , schematic C, gold terminations 4701SD = 10-pin SIP , schematic C, 60/40 Sn/Pb terminations 4708 = 10-pin SIP , schematic F , gold terminations 4708SD = 10-pin SIP , schematic F , 60/40 Sn/Pb terminations 4709 = 10-pin SIP , schematic G, gold terminations 4709SD = 10-pin SIP , schematic G, 60/40 Sn/Pb terminations Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Optional Ratio Tolerance to R1 Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Commercial Sample Part No. M83401 - 08 - H - 1002 - F - G Model M83401 = Military qualiﬁ ed resistor network Size 07 = RZ060 6-pin SIP 08 = RZ080 8-pin SIP 09 = RZ090 10-pin SIP 21 = RZ210 Hi-Rel 6-pin SIP 22 = RZ220 Hi-Rel 8-pin SIP 23 = RZ230 Hi-Rel 10-pin SIP Characteristic per MIL-PRF-83401 M; K; H Resistance Standard 4-digit MIL resistance code Example: 1000 = 100Ω; 1001=1000Ω Absolute Tolerance Code Schematic C; G Standard termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip ﬁ nish. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Military (MIL-PRF-83401) TaNFilm® Precision SIP Network Commercial and MIL Qualified 4222 South Staples Street Corpus Christi T exas 78411 USA© IRC Advanced Film Division T elephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com Sample Part No. SIP - 4781 - 03 - 1001 F B Model 4761 = 6-pin SIP , schematic C, gold terminations 4761SD = 6-pin SIP , schematic C, 60/40 Sn/Pb terminations 4768 = 6-pin SIP , schematic F , gold terminations 4768SD = 6-pin SIP , schematic F , 60/40 Sn/Pb terminations 4769 = 6-pin SIP , schematic G, gold terminations 4769SD = 6-pin SIP , schematic G, 60/40 Sn/Pb terminations 4781 = 8-pin SIP , schematic C, gold terminations 4781SD = 8-pin SIP , schematic C, 60/40 Sn/Pb terminations 4788 = 8-pin SIP , schematic F , gold terminations 4788SD = 8-pin SIP , schematic F , 60/40 Sn/Pb terminations 4789 = 8-pin SIP , schematic G, gold terminations 4789SD = 8-pin SIP , schematic G, 60/40 Sn/Pb terminations 4701 = 10-pin SIP , schematic C, gold terminations 4701SD = 10-pin SIP , schematic C, 60/40 Sn/Pb terminations 4708 = 10-pin SIP , schematic F , gold terminations 4708SD = 10-pin SIP , schematic F , 60/40 Sn/Pb terminations 4709 = 10-pin SIP , schematic G, gold terminations 4709SD = 10-pin SIP , schematic G, 60/40 Sn/Pb terminations Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Resistance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Absolute Tolerance Optional Ratio Tolerance to R1 Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Commercial Sample Part No. M83401 - 08 - H - 1002 - F - G Model M83401 = Military qualiﬁ ed resistor network Size 07 = RZ060 6-pin SIP 08 = RZ080 8-pin SIP 09 = RZ090 10-pin SIP 21 = RZ210 Hi-Rel 6-pin SIP 22 = RZ220 Hi-Rel 8-pin SIP 23 = RZ230 Hi-Rel 10-pin SIP Characteristic per MIL-PRF-83401 M; K; H Resistance Standard 4-digit MIL resistance code Example: 1000 = 100Ω; 1001=1000Ω Absolute Tolerance Code Schematic C; G Standard termination is gold plate. Contact factory for optional 60/40 Sn/Pb hot solder dip ﬁ nish. Screening available for non-QPL values and tolerances. Contact factory for ordering information. Ordering Data - Military (MIL-PRF-83401) TaNFilm® Precision SIP Network Commercial and MIL Qualified

Product Information

M83401-08-H-1002-F-G specifications and overview.

Summary

Commercial and MIL Qualified

Description

Commercial and MIL Qualified

Source title M83401-08-H-1002-F-G Datasheet(PDF) - TT Electronics.

Related Parts

More parts from the same family.

Browse manufacturer