M700 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

Applications

  • Programmable and flexible
  • Configurable parameters
  • MOSFET short-circuit protection function
  • Support multiple throttle types and high pedal disable (HPD)
  • Short duration boost capability
  • CAN communication with controller
  • External status LED for system troubleshooting
  • High efficiency , silent operation
  • Child MCU monitor M700 is a high-power hydraulic pump controller , it can provide fully programmable control of DC series wound motors. It features microprocessor-based logic with programmable parameters and offers maximum flexibility for minimum cost.
  • Battery-power vehicle applications using pump motor
  • Personnel carriers
  • Mobile elevating work platforms
  • DC wound motors used in Hydraulic Pump Scissor Lifts Nominal Input Voltage 24V and 36V Voltage Range 14V ~ 46.5V PWM Operating Frequency 15.6kHz Electrical Isoloation to Heatsink (no Contactors engaged) 500VAC (minimum) KSI Input Current 100mA Logic Input current < 2mA Status LED Output Current (Max) < 2mA Throttle types 2-wire Rheostats: 0-5kΩ, 5kΩ-0 Voltage Throttles: 0-5V CANopen Current Rating

2 Minute 300A

5 Minute 250A

1 Hour 150A

www.sensata.com Page 2 Copyright © 2021 Sensata Technologies Inc. Environmental Operating Temperature -40 °C to 50 °C Storage Temperature -40 °C to 85 °C Humidity 70%R.H Protection Level IP54 Mechanical Shock 50g@12s for 3 times for each direction Random Vibration 10Hz to 2000Hz, 5.58g @2h at each axis EMC EN 55022 EN 61000-3-2 EN 61000-3-3 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11

  • Redundant hardware and software J4: ADMA TECH DMF-04-R-N. J6: ADMA TECH DMM-04-R-N-P-MT -V0 T wo Driver output with max 2A B+ Positive pole of battery B- Negative pole of battery M- Negative pole of motor J1 Key switch connection J2 Connection to wire 1 of 2-wire rheostat J3 Connection to wire 2 of 2-wire rheostat, or voltage throttle input J4 Pin 1 RX Pin 2 GND Pin 3 TX Pin 4 +12.7V Pin 1 DRIVER OUTPUT Pin 2 Interlock Pin 3 CANL Pin 4 CANH Connections Compliance
  • EMC: Designed to the requirements of EN12895. Safety: Designed to the requirements of EN1175 Accord with UL 583 OBSOLETE

www.sensata.com Page 3 Copyright © 2021 Sensata Technologies Inc. Dimensions in mm DIMENSIONS OBSOLETE

www.sensata.com Copyright © 2021 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-ELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Page 4 Rev:06/16/21 CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 ORDERING OPTIONS Example : M700-VR1 Recommend to choose a kit product K310, K500, K520 series including Sensata Platform Control Unit (PCU), Electronic Control Unit (ECU) and Motor Controller (MC) for reliable application. Part Number Product Description M700-VR1 M700 Motor Controller OBSOLETE