M6SXAP

M6SXAP MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: M6SXAP M6SXAP SPECIFICATIONS ES-7996 Rev.4 Page 1/4 http://www.m-system.co.jp/ Tension-Clamp Ultra-Slim Signal Conditioners M6S Series DC/FREQUENCY CONVERTER (PC programmable) Function & features

• Maintenance-free tension clamp connection
• 5.9-mm wide ultra-slim design
• Low profile allows the M6S module mounted in a 120-mm deep panel
• Converts a DC input into a FM (frequency modulation) or PWM (pulse width modulated) signal
• PC programmable
• High-density mounting
• Power and status indicator LEDs 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: M6SXAP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6SXAP-[1][2]-R[3] Specify a code from below each [1] through [3]. (e.g. M6SXAP-Z1A-R/Q)
• Specify the specification for option code /Q (e.g. /C01/SET) [1] INPUT Current Z1: Range 0 – 50 mA DC (Input resistance 25 Ω) Voltage S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.) S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.) (Configurator software is used to change the input type and precise range.) [2] OUTPUT A: Open collector (100 kHz for FM, 1 kHz for PWM) M: 5 V pulse (100 kHz for FM, 1 kHz for PWM) N: 12 V pulse (100 kHz for FM, 1 kHz for PWM) P: 24 V pulse (100 kHz for FM, 1 kHz for PWM) Output modulation type and range are configurable with the configure software. The output signal type is configurable with the DIP switches. POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-7837)

RELATED PRODUCTS

• PC configurator software (model: M6CFG) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Connection Input and output: Tension clamp Power input: Via the Installation Base (model: M6SBS) or Tension clamp Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: -2 to +2 % (PC programming) Span adjustment: 98 to 102 % (PC programming) Power LED: Green light turns on when the power is supplied. Status indicator LED: Orange LED; Blinking patterns indicate different operating status of the transmitter. Programming: Downloaded from PC
• Input type and range
• Modulation type (FM, PWM)
• Output range
• Zero and span
• User’s linearization table (max. 101 points, specified

MODEL: M6SXAP M6SXAP SPECIFICATIONS ES-7996 Rev.4 Page 2/4 http://www.m-system.co.jp/ within -2 to +102 %)

• Others (Refer to the instruction manual for details) Configurator connection: 2.5 dia. miniature jack; RS-232-C level INPUT SPECIFICATIONS ■ DC Current: Input resistor incoporated (If not specified, the input range is 4 – 20 mA DC.) Input range: 0 – 50 mA DC Minimum span: 2 mA Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. ■ DC Voltage
• Code S1 (narrow spans) Input range: -1000 – +1000 mV DC Minimum span: 100 mV
• Code S2 (wide spans) Input range: -10 – +10 V DC Minimum span: 1 V Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. If not specified, the input range is shown below. S1: 0 – 100 mV DC S2: 1 – 5 V DC OUTPUT SPECIFICATIONS ■ Modulation
• Frequency modulation Output range: 0 to 100 % Max. frequency: 100 kHz Min. span: 0.01 Hz (The output frequency changes according to the input signal. Duty rate is approx. 50 %)
• Pulse width modulation Output range: 1 to 99 % Usable frequency: 0.008 Hz to 1 kHz (According to the input signal, the output pulse width (duty rate) changes without change of its frequency. The frequency is configurable with PC Configurator software, M6CFG.). ■ Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 100 kHz Saturation voltage: 0.5 V DC (Factory default: 0 to 10 kHz, frequency modulation) ■ Voltage Pulse High level: Rating (5, 12 or 24 V) ±10 % Low level: ≤ 0.5 V Load resistance:

• ≥ 1.0 kΩ for 5 V
• ≥ 2.4 kΩ for 12 V
• ≥ 4.8 kΩ for 24 V Factory default: 0 to 10 kHz, Frequency modulation INSTALLATION Power consumption: Approx. 1 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6SBS) or DIN rail Weight: 65 g (2.3 oz) PERFORMANCE in percentage of span Accuracy: Input accuracy + output accuracy Inversely proportional to the span. Input accuracy in percentage of input span:
• ±0.01 % for -1000 to +1000 mV
• ±0.01 % for -10 to +10 V
• ±0.02 % for 0 to 50 mA Output accuracy at max. frequency (FM):
• ±0.10 % for ≤ 10 kHz
• ±0.05 % for ≤ 5 kHz
• ±0.02 % for ≤ 1 kHz
• For 10 kHz to 100 kHz output accuracy is following. Output accuracy (%) = Max. frequency (kHz) x 0.01 Output accuracy (PWM): ±0.2 % See CALCULATION EXAMPLES OF OVERALL ACCURACY. Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. input span Response time: 0.1 sec. + 1 pulse cycle of 100 % output The time between the moment when the input changes 0 % to 100 % and the moment when the first pulse changes. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) CALCULATION EXAMPLES OF OVERALL ACCURACY 1. Frequency modulation E.g.: Input range -10 to +10 V, input span 1 to 5 V, max. frequency 10 kHz Input accuracy = Input range (20 V) ÷ Input span (4 V) x Input accuracy (0.01 %) = 0.05 % Output accuracy = 0.10 % Overall accuracy = ±0.15 % 2. Pulse width modulation E.g.: Input range -10 to +10 V, input span 1 to 5 V, frequency 1 kHz Input accuracy = 0.05 % (same as above) Output accuracy = 0.20 % Overall accuracy = ±0.25 %

MODEL: M6SXAP M6SXAP SPECIFICATIONS ES-7996 Rev.4 Page 3/4 http://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL VIEW ■ FRONT VIEW (with the cover open) ■ SIDE VIEW SW1 2 3 4 5 6 7 8 OFF ON SW1 Output Range Selectors Status Indicator LED Power LED Configurator Jack 5 6 7 8 1 2 3 4 The output signal type is configurable with the DIP switches. Refer to the installation manual for detailed procedure. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) DIN RAIL 35mm wide DIN RAIL HOOK *Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm 102 (4.02) [0.5 (.02)]SCREWDRIVER INSERTION ANGLE : approx. 40° WIRE INSERTION ANGLE : approx.35° TEST PROBE max. 2 (.08) dia. SCREWDRIVER INSERTION ANGLE : approx. 35° 5 6 7 8 1 2 3 4

• When mounting, no extra space is needed between units.

MODEL: M6SXAP M6SXAP SPECIFICATIONS ES-7996 Rev.4 Page 4/4 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Digital Computation Output Driver1 OUTPUT POWER Low Drift Amplifier 25 Ω+ CURRENT (Z1)– VOLTAGE (S1, S2) CONFIGURATOR JACK DIP SW CONNECTOR POWER POWER LED ■ Open Collector Output Connection Examples ■ Voltage Pulse STATUS IND. LED Specifications are subject to change without notice.