M6SVF MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M6SVF M6SVF SPECIFICATIONS ES-7994 Rev.4 Page 1/3 http://www.m-system.co.jp/ Tension-Clamp Ultra-Slim Signal Conditioners M6S Series SIGNAL TRANSMITTER (high-accuracy, ultra-high speed response 30 μsec.) Functions & Features

  • Maintenance-free tension clamp connection
  • 5.9-mm wide ultra-slim design
  • Low profile allows the M6S module mounted in a 120-mm deep panel
  • Galvanically isolates process instrumentation signals
  • 30-microsecond response
  • Frequency characteristics 12 kHz (-3 dB)
  • High-density mounting
  • Power indicator LED Typical Applications
  • Isolation for a vibration analyzing system
  • Isolation for Discharge/Charge tester 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: M6SVF–[1]4W–R[2]

ORDERING INFORMATION

  • Code number: M6SVF-[1]4W-R[2] Specify a code from below for each [1] and [2]. (e.g. M6SVF-04W-R/Q)
  • Special input range (For code 0: e.g. -164 – +164 mV DC)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT Voltage 2W: -100 – +100 mV DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 8W: -20 – +20 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (Select input range as indicated below. Input resistance 1 MΩ min.) -20 – +20 mV DC -24 – +24 mV DC -40 – +40 mV DC -85 – +85 mV DC -164 – +164 mV DC -200 – +200 mV DC -15 – +15 V DC -25 – +25 V DC -55 – +55 V DC -60 – +60 V DC OUTPUT Voltage 4W: -10 – +10 V DC (Load resistance 2000 Ω min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [2] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Connection Input and output: Tension clamp Power input: Via the Installation Base (model: M6SBS) or Tension clamp Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange input: -5 to +105 % Zero adjustment: -1 to +1 % (front) Span adjustment: 99 to 101 % (front) Power LED: Green light turns on when the power is supplied. INPUT SPECIFICATIONS Input resistance: 1 MΩ min. (3 kΩ min. at power loss) OUTPUT SPECIFICATIONS Parallel load capacitance: Max. 2000 pF

MODEL: M6SVF M6SVF SPECIFICATIONS ES-7994 Rev.4 Page 2/3 http://www.m-system.co.jp/ INSTALLATION Power consumption: Approx. 0.6 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6SBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.01 % Temp. coefficient: ±0.005 %/°C (±0.003 %/°F) Frequency characteristics: 12 kHz, -3 dB Response time: ≤ 30 µsec. (0 – 90 %) Line voltage effect: ±0.01 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL VIEW (With the cover open) Zero Adj. Power LED Span Adj.

MODEL: M6SVF M6SVF SPECIFICATIONS ES-7994 Rev.4 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) DIN RAIL 35mm wide DIN RAIL HOOK *Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm 102 (4.02) [0.5 (.02)]SCREWDRIVER INSERTION ANGLE : approx. 40° WIRE INSERTION ANGLE : approx.35° TEST PROBE max. 2 (.08) dia. SCREWDRIVER INSERTION ANGLE : approx. 35° 5 6 7 8 1 2 3 4

  • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM This unit, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable to prevent noise from entering through the input wiring. SZ OUTPUT POWER Output Driver Isolation Low Drift AmplifierSIGNAL SOURCE POWER LED CONNECTOR POWER Specifications are subject to change without notice.