M6SBS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: M6SBS M6SBS SPECIFICATIONS ES-7985 Rev.10 Page 1/5 http://www.m-system.co.jp/ Tension-Clamp Ultra-Slim Signal Conditioners M6S Series INSTALLATION BASE Functions & Features

  • Backplane to collectively supply power to the M6S modules in combination with the Power Supply Module (model: M6SPSx or M6-PSM) MODEL: M6SBS–[1][2]

ORDERING INFORMATION

  • Code number: M6SBS-[1][2] Specify a code from below for each [1] and [2]. (e.g. M6SBS-08/UL/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] NUMBER OF SLOTS 08: 8 slots 08P: 8 slots (for extension) 08A: 8 slots + power supply slot (for model M6-PSM) (UL not available) [2] OPTIONS (multiple selections) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Only solder side of the main PWB is coated. /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • M6S series signal conditioners (Not able to supply to AC power signal conditioners (M2 code))
  • Power supply module (model: M6SPS1)
  • Power supply module (model: M6SPS2)
  • Power supply module (model: M6-PSM)
  • Blank filler module (model: M6SDM) GENERAL SPECIFICATIONS Capacity: Up to 48 modules (including power supply module) with Extension Bases (The usable number of signal conditioners depends on the capacity of the power supply module. Refer to the M6-PSM specification sheets.) Isolation: Power to ground INSTALLATION Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Surface or DIN rail Weight: M6SBS-08, -08P: 50 g (1.8 oz) without signal conditioners M6SBS-08A: 80 g (2.8 oz) without signal conditioners PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1)

MODEL: M6SBS M6SBS SPECIFICATIONS ES-7985 Rev.10 Page 2/5 http://www.m-system.co.jp/ EXTERNAL VIEW Install signal conditioners from the slot at either end. Power Supply Modules (M6SPS1 or M6SPS2) could be mounted at any slots, however, installing them at either end is generally recommended. Mount the power supply module (M6-PSM) on the power module slot of M6SBS-08A. Power Supply Module Signal Conditioner 2 8 ■ M6SBS-08A 1 2 • • • •8 ■ M6SBS-08, M6SBS-08P Signal Conditioner or Power Supply Module

  • • • •

MODEL: M6SBS M6SBS SPECIFICATIONS ES-7985 Rev.10 Page 3/5 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 49 (1.93) 37 (1.46) 11.5 (.45) 99 (3.90) 70 (2.76) 5 (.20) 5 (.20) 14 (.55) (.55) 22.5 (.89) 116 (4.57) 27 (1.06) 49 (1.93) 72 (2.83) 37 (1.46) 3 (.12) 99 (3.90) 70 (2.76) 5 (.20) 5 (.20) 14 (.55) 24.4 (.96) (.55) 22.5 (.89) 116 (4.57) 27 (1.06) 49 (1.93) 16 ■ M6SBS-08, M6SBS-08P ■ M6SBS-08A [5 (.20)] [5 (.20)] DIN RAIL 35mm wide DIN RAIL 35mm wide 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep [3 (.12)] [3 (.12)] 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep

MODEL: M6SBS M6SBS SPECIFICATIONS ES-7985 Rev.10 Page 4/5 http://www.m-system.co.jp/ MOUNTING REQUIREMENTS unit: mm (inch) ■ MOUNTING DIRECTION The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise, may shorten the product’s life expectation or deteriorate its performance. Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.) M6SBS Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.) (.39) (.39) (.55) 40 (1.6) ■ SURFACE MOUNTING 3-M4

  • M6SBS-08A 24.4 (.96) 24.4 (.96) 11.8 (.46) n-M4 *1
  • M6SBS-08A + M6SBS-08P
  • M6SBS-08
  • M6SBS-08 + M6SBS-08P 3-M4 n-M4 *1 11.8 (.46) 70 (2.76) 70 (2.76) 70 (2.76) 70 (2.76) 37 (1.46)37 (1.46) 14 (.55) 14 (.55) 14 (.55) 14 (.55) *1. n = (Number of bases) x 3

MODEL: M6SBS M6SBS SPECIFICATIONS ES-7985 Rev.10 Page 5/5 http://www.m-system.co.jp/ Specifications are subject to change without notice.