M6PSM MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M6-PSM M6-PSM SPECIFICATIONS ES-9196 Rev.6 Page 1/3 http://www.m-system.co.jp/ POWER SUPPLY MODULE (for AC power use) Functions & Features

  • Supplying power to M6D, M6N, M6S series signal conditioners through an installation base (model: M6xBS- 08A)
  • Universal AC power input
  • Power indicator LED 96.5 (3.80) 18 (.71) (3.54) mm (inch) MODEL: M6–PSM[1]

ORDERING INFORMATION

  • Code number: M6-PSM[1] Specify a code from below for [1]. (e.g. M6-PSM/Q)
  • Specify the specification for option code /Q (e.g. /C01) POWER INPUT AC Power 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • Euro Terminal Ultra-Slim Signal Conditioners M6D Series
  • Screw Terminal Ultra-Slim Signal Conditioners M6N Series
  • Tension-Clamp Ultra-Slim Signal Conditioners M6S Series GENERAL SPECIFICATIONS Connection Power input: Euro type connector terminal, Applicable wire size: 0.2 - 2.5 mm2 (AWG24 - 12), Stripped length 7 mm

24 V DC power: Via the Installation Base (model: M6xBS-

08A) Housing material: Flame-resistant resin (black) Isolation: 24 V DC power to power input Power LED: Green light turns on when the power is supplied. INSTALLATION Power Consumption

  • AC: Approx. 25 VA at 100 V Approx. 30 VA at 200 V Approx. 35 VA at 264 V Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6xBS-08A) Weight: 200 g (0.44 lb) PERFORMANCE Output: 24 V ±1 V DC, 400 mA (continuance) Arrange in order that the total current consumed by the signal conditioners is within this capacity. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (24 V DC power to power input to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2

24 V DC power to power input:

Reinforced insulation (300 V) RoHS Directive EN 50581

MODEL: M6-PSM M6-PSM SPECIFICATIONS ES-9196 Rev.6 Page 2/3 http://www.m-system.co.jp/ CURRENT CONSUMPTION In order to operate M6x signal conditioners, it is required that the total maximum current of the signal conditioners is not more than the continuous output current (400mA) of M6 -PSM. If the power supply (24V DC) of M6-PSM goes insufficient, take some measures, such as changing the combination of signal conditioners or reducing the number of them mounted. M6DCTC, M6NCTC, M6SCTC 25 mA M6DDY, M6NDY, M6SDY 50 mA M6DPA, M6NPA, M6SPA 25 mA M6DPP, M6NPP, M6SPP 50 mA M6DVF, M6NVF, M6SVF 30 mA M6DVS, M6NVS, M6SVS 25 mA M6DWVS, M6NWVS, M6SWVS 30 mA M6DXAP, M6NXAP, M6SXAP 50 mA M6DXAR, M6NXAR, M6SXAR 25 mA M6DXAS, M6NXAS, M6SXAS 25 mA M6DXAT, M6NXAT, M6SXAT 25 mA M6DXF1, M6NXF1, M6SXF1 25 mA M6DXF2, M6NXF2, M6SXF2 25 mA M6DXF3, M6NXF3, M6SXF3 25 mA M6DXM, M6NXM, M6SXM 25 mA M6DXR, M6NXR, M6SXR 25 mA M6DXT, M6NXT, M6SXT 25 mA M6DXU, M6NXU, M6SXU 25 mA M6DXV, M6NXV, M6SXV 25 mA M6DYV, M6NYV, M6SYV 21 mA EXTERNAL VIEW 1 2 3 POWER Power LED Euro Type Connector Terminal

MODEL: M6-PSM M6-PSM SPECIFICATIONS ES-9196 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 LOCKING CLAMP POSITIONING GUIDE 90 (3.54)6.5 (.26) 18 (.71) 90 (3.54) 5.6 (.22) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM U V 24V DC POWERControl Circuit POWER LED Output DriverPOWER INPUT CONNECTOR Specifications are subject to change without notice.