M6NYV MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M6NYV M6NYV SPECIFICATIONS ES-7901 Rev.8 Page 1/3 http://www.m-system.co.jp/ Screw Terminal Ultra-Slim Signal Conditioners M6N Series ISOLATOR Functions & Features

  • 7.5-mm wide ultra-slim design
  • Low profile allows the M6N module mounted in a 120-mm deep panel
  • Galvanically isolates process instrumentation signals
  • High-density mounting
  • Power indicator LED mm (inch) 7.5 (.30) 102 (4.02) 102 (4.02) MODEL: M6NYV-[1][2]-[3][4]

ORDERING INFORMATION

  • Code number: M6NYV-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M6NYV-4W4W-R/K/UL/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT / [2] OUTPUT AA: 4 - 20 mA DC (Input resistance 50 Ω) / 4 - 20 mA DC (Load resistance 550 Ω max.) A6: 4 - 20 mA DC (Input resistance 50 Ω) / 1 - 5 V DC (Load resistance 5000 Ω min.) 6A: 1 – 5 V DC (Input resistance 1 MΩ min.) / 4 - 20 mA DC (Load resistance 550 Ω max.) 66: 1 - 5 V DC (Input resistance 1 MΩ min.) / 1 - 5 V DC (Load resistance 5000 Ω min.) 4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.) / -10 - +10 V DC (Load resistance 20 kΩ min.) [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) (UL not available) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 3.5 msec. voltage output; Approx. 25 msec. current output) Standards & Approvals blank: CE marking /UL: UL approval, CE marking Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Connection Input and output: M3 screw terminal (torque 0.5 N·m) Power input: Via the Installation Base (model: M6NBS) (not available for AC power input) or M3 screw terminal (torque 0.5 N·m) Recommended solderless terminal: Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit. Applicable wire size: 0.2 – 2.5 mm2 Housing material: Flame-resistant resin (black) Isolation: Input to output to power Zero adjustment: -2 to +2 % (front) (Output code 4W: Adjustable at 0 V.) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. ■Recommended solderless terminal (unit: mm (inch)) 3.2 (.13) dia. 4 min. (.16) 5.8 max. (.23) 5.5 max. (.22) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated INSTALLATION Power Consumption
  • AC: Max. 2 VA

MODEL: M6NYV M6NYV SPECIFICATIONS ES-7901 Rev.8 Page 2/3 http://www.m-system.co.jp/

  • DC: Approx. 0.45 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6NBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581 Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Zero Adj. Power LED Span Adj.

MODEL: M6NYV M6NYV SPECIFICATIONS ES-7901 Rev.8 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 102 (4.02) 7.5 (.30) DIN RAIL HOOK 102 (4.02) [1 (.04)] 8–M3 SCREW TERMINAL WIRE INSERTION ANGLE : approx. 35° SCREWDRIVER INSERTION ANGLE : approx. 55° SCREWDRIVER INSERTION ANGLE : approx. 40° DIN RAIL 35mm wide 5 6 7 8 1 2 3 4

  • When mounting, no extra space is needed between units.*Screwdriver stem diameter: 6 mm (.24”) or less SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM U(+) V(–) Isolation SZ Low Drift Amplifier Output Driver+ INPUT * Input shunt resistor incorporated for current input. Available only for DC power input type OUTPUT POWER POWER LED CONNECTOR POWER Specifications are subject to change without notice.